Hobbywing XRotor Pro HV 80A

Contents

Hobbywing XRotor Pro HV 80A ESC User Manual

Model: XRotor Pro HV 80A

1. Introduction

This manual provides essential information for the safe and efficient operation of your Hobbywing XRotor Pro HV 80A Electronic Speed Controller (ESC). The XRotor Pro 80 Amp HV Multi-Rotor Brushless ESC is designed for large drones, including agricultural applications. Please note that this product is a used item, but its functionality is confirmed to be good. It is crucial to read and understand all instructions before installation and use.

2. Product Overview

The Hobbywing XRotor Pro HV 80A ESC is a high-performance brushless electronic speed controller. It features advanced technology for reliability and efficiency in demanding multi-rotor applications.

Key Features:

  • Plastic Sealing Technology: Provides a professional appearance and a reliable, splash-proof structure suitable for various weather conditions.
  • Highly Intelligent & Adaptive: Preset settings (except timing) make the ESC user-friendly, intelligent, and highly adaptive.
  • Driving Efficiency Optimization Technology (DEO): Reduces ESC operating temperature, improves flight time, and offers smooth throttle linearity with enhanced stability.
  • Special Design for Disc Type Motors: Optimized firmware specifically for disc type motors, making it ideal for demanding drone applications.
  • Special Fan Port: Includes a 6V/400mA output port for direct power to an optional cooling fan (fan not included).

Physical Description:

Hobbywing XRotor Pro HV 80A ESC front view
Figure 1: Front view of the Hobbywing XRotor Pro HV 80A ESC, showing the model and specifications printed on the casing.
Hobbywing XRotor Pro HV 80A ESC top view
Figure 2: Top view of the ESC, highlighting the heat sink fins for efficient cooling.
Hobbywing XRotor Pro HV 80A ESC bottom view
Figure 3: Bottom view of the ESC, showing the heat sink fins and overall compact design.

3. Specifications

AttributeValue
ModelXRotor Pro HV 80A
Continuous Current80A
Peak Current (10s)100A
BECNo
LiPo Cells Supported6-14S
Programmable ItemTiming (High/Intermediate)
Weight106g
Size (LxWxH)77x35x21mm
MaterialComposite Material
Recommended Age14+ years

4. Installation and Setup

Proper installation is critical for the performance and safety of your ESC and drone. This ESC does not include battery or motor connectors, which must be sourced separately and soldered correctly.

4.1 Wiring Connections:

  1. Motor Connection: Connect the three motor wires from the ESC to the three phase wires of your brushless motor. The order of connection may affect motor rotation direction; this can be adjusted later if needed.
  2. Battery Connection: Solder appropriate high-current battery connectors (e.g., XT60, XT90, AS150 depending on current draw) to the ESC's power input wires. Ensure correct polarity (red to positive, black to negative). This ESC supports 6-14S LiPo batteries.
  3. Signal Cable: Connect the signal cable from the ESC to the corresponding motor output port on your flight controller. Ensure the signal, ground, and (if present) telemetry wires are connected correctly according to your flight controller's manual.
  4. Optional Cooling Fan: If using an external cooling fan, connect it to the dedicated 6V/400mA output port on the ESC. Ensure correct polarity.

4.2 Mounting:

  • Mount the ESC securely to your drone frame using zip ties or double-sided adhesive tape.
  • Ensure adequate airflow around the ESC to facilitate cooling, especially given its heat sink design.
  • Keep the ESC away from sensitive electronic components to prevent electromagnetic interference.
  • Use the provided heat shrink tubing to insulate all soldered connections, protecting them from short circuits and environmental elements.

5. Operation

The XRotor Pro HV 80A ESC is designed for simplicity with most settings pre-configured. The primary programmable item is motor timing.

5.1 Initial Power-Up:

  1. Before connecting the battery, double-check all wiring connections for correct polarity and secure soldering.
  2. Connect the flight controller to your computer and ensure it's configured for the correct ESC protocol (e.g., PWM, OneShot, DShot, etc., though this ESC is likely PWM/analog based on its features).
  3. Connect the battery to the ESC. You should hear a series of beeps indicating successful initialization.
  4. Perform a motor direction test. If a motor spins in the wrong direction, swap any two of the three motor phase wires connected to the ESC.

5.2 Motor Timing Adjustment:

The ESC allows adjustment of motor timing between "High" and "Intermediate".

  • Intermediate Timing: Generally suitable for most motors and provides a good balance of efficiency and power.
  • High Timing: May offer slightly more power for some motors but can increase heat generation and potentially reduce efficiency. Use with caution and monitor ESC temperature.
  • Refer to your motor's specifications or conduct testing to determine the optimal timing setting for your specific setup. The method for changing timing is typically via throttle stick programming or a dedicated programming card (not included). Consult the full Hobbywing XRotor Pro manual for detailed programming steps if needed.

6. Maintenance

Regular maintenance ensures the longevity and reliable performance of your ESC.

  • Inspection: Periodically inspect the ESC for any signs of physical damage, loose connections, or burnt components.
  • Cleaning: Keep the ESC clean and free from dust, dirt, and moisture. The plastic sealing technology provides splash protection, but it is not fully submersible.
  • Temperature Monitoring: During operation, especially after flights, check the ESC temperature. Excessive heat can indicate an issue with motor timing, propeller size, or insufficient cooling.
  • Wiring Integrity: Ensure all wires and solder joints remain secure and free from corrosion.

7. Troubleshooting

If you encounter issues with your ESC, consider the following common troubleshooting steps:

ProblemPossible CauseSolution
Motor not spinning / No responseIncorrect wiring, loose connection, signal issue, ESC not armed.Check all wiring, ensure signal cable is connected, verify flight controller arming sequence.
Motor stutters or vibratesIncorrect motor timing, damaged motor, loose motor wires.Adjust motor timing (try "Intermediate"), check motor for damage, re-solder motor wires.
ESC gets excessively hotOverloading, incorrect timing, insufficient cooling, short circuit.Reduce load (smaller props), adjust timing (try "Intermediate"), ensure good airflow, check for shorts. Consider adding an optional cooling fan.
Motor spins in wrong directionIncorrect motor phase wire connection.Swap any two of the three motor phase wires.

8. User Tips

  • Always perform a bench test after any wiring changes or component replacements to ensure everything functions correctly before flight.
  • For optimal performance and longevity, ensure your battery is adequately charged and capable of delivering the required current for your setup.
  • While the ESC is splash-proof, avoid prolonged exposure to heavy rain or submersion to prevent damage.
  • Consider using a power analyzer to measure actual current draw and ensure it stays within the ESC's continuous and peak current limits.

9. Warranty and Support

As this product is explicitly stated as a used item, standard manufacturer warranty terms may not apply. Please refer to the seller's specific return or support policies at the time of purchase for any post-sale assistance. For technical inquiries regarding the product's functionality or compatibility, it is recommended to contact the seller directly or consult Hobbywing's official resources for general product information.

© 2024 Hobbywing. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.