1. Introduction
Thank you for choosing the Toocki 10000mAh Magnetic Wireless Power Bank (Model TQ-PB04B). This portable power bank is designed to provide convenient and fast charging for your mobile devices, featuring both magnetic wireless charging and wired USB-C PD 20W fast charging capabilities. Its compact design and robust safety features make it an ideal companion for daily use and travel.
This manual provides essential information on how to set up, operate, and maintain your power bank. Please read it thoroughly before use to ensure optimal performance and safety.
2. Safety Information
WARNING: Please read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, or serious injury.
- Do not disassemble, modify, or repair the device yourself.
- Do not expose the power bank to fire, high temperatures (above 60°C/140°F), or direct sunlight for extended periods.
- Avoid dropping, hitting, or subjecting the power bank to strong impacts. Do not press or squeeze the device.
- Keep the power bank away from water, moisture, and corrosive substances.
- Do not use the power bank in environments with extreme temperatures or high humidity.
- Keep out of reach of children.
- Use only certified charging cables and adapters.
- If the power bank swells, leaks, or emits an unusual odor, discontinue use immediately.
- Dispose of the product responsibly according to local regulations.
Built-in Safety Protections:
The Toocki Power Bank is equipped with multiple safety features to ensure peace of mind during charging:
- Overcurrent Protection
- Short Circuit Protection
- Over-discharge Protection
- Over-voltage Discharge Protection
- High Temperature Discharge Protection
- Low Temperature Protection
- High Temperature Charging Protection
- Low Temperature Charging Protection
- Overcharge Protection
3. Product Overview
Package Contents:
- Toocki Magnetic Wireless Power Bank (TQ-PB04B)
- USB-C Charging Cable
- User Manual (this document)
Component Identification:
Refer to the images below for a visual guide to the power bank's features and ports.
- Wireless Charging Pad: Located on the front surface for magnetic wireless charging.
- USB-C Port (Input/Output): Used for charging the power bank and wired charging of devices.
- LED Power Indicators: 5-cell LED lights to show remaining battery level.
- Power Button: Activates the power bank and checks battery level.
LED Power Display:
The 5-cell LED indicator lights provide a clear visual of the power bank's remaining battery level, eliminating the need for guesswork.
| LED Indicators | Battery Level |
|---|---|
| 5 lights on | 80% - 100% |
| 4 lights on | 60% - 80% |
| 3 lights on | 40% - 60% |
| 2 lights on | 20% - 40% |
| 1 light on | 0% - 20% (Recharge soon) |
4. Specifications
| Parameter | Detail |
|---|---|
| Brand | Toocki |
| Name | Magnetic Wireless Power Bank |
| Model No. | TQ-PB04B |
| Material | Aluminum alloy + ABS |
| Battery | Polymer lithium battery |
| Capacity | 10000mAh (3.7V, 37Wh) |
| Conversion Efficiency | ≥70% |
| USB-C Input | 5.0V⎓3.0A, 9.0V⎓2.0A (18.0W Max.) |
| USB-C Output | 5.0V⎓3.0A, 9.0V⎓2.22A, 12.0V⎓1.67A (20.0W Max.) |
| Wireless Charging Output | 5.0W/7.5W/10.0W/15.0W Max. |
| PPS | 5.0-5.9V⎓3.0A, 5.0-11.0V⎓2.0A |
| Wireless Charging + USB-C Charging Output | USB-C Output: 5.0V⎓1.0A, Wireless Charging Output: 5.0V⎓1.0A |
| Total Output | 20.0W Max. |
| Product Size | About 105.0mm*65.0mm*15.0mm |
| Product Weight | ≈192.3g |
Certifications:
RoHS, CE, UL, FCC
High-Concerned Chemical:
None
5. Setup
Initial Charging of the Power Bank:
- Connect the provided USB-C cable to the USB-C port on the power bank.
- Connect the other end of the USB-C cable to a compatible USB power adapter (not included) or a computer's USB port.
- The LED power indicators will light up and flash to show the charging status. When all 5 LEDs are solid, the power bank is fully charged.
- It is recommended to fully charge the power bank before its first use.
6. Operating Instructions
Checking Battery Level:
Press the power button once to activate the LED power indicators and check the remaining battery level.
Wireless Magnetic Charging:
This power bank supports magnetic wireless charging for compatible devices (e.g., iPhone 12-15 series).
- Ensure your device supports magnetic wireless charging.
- Align the back of your compatible device with the wireless charging pad on the power bank. The magnets will snap into place, ensuring proper alignment.
- The power bank will automatically begin charging your device. The LED indicators may show activity during wireless charging.
Wired Charging:
Use the USB-C port for fast wired charging of a wide range of devices.
- Connect one end of a USB-C cable to the USB-C port on the power bank.
- Connect the other end of the cable to your device's charging port.
- The power bank will automatically detect and begin charging your device.
Simultaneous Charging (Power Bank & Device):
The power bank supports charging itself while also wirelessly charging a device.
- Connect the power bank to a power source using the USB-C input.
- Place your compatible device on the wireless charging pad.
- Both the power bank and your device will charge simultaneously.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the power bank. Do not use harsh chemicals or abrasive materials.
- Storage: Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Health: To maintain battery health, fully charge and discharge the power bank at least once every three months if not in regular use.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Power bank not charging | Cable issue, adapter issue, power bank fault. | Try a different USB-C cable and power adapter. Ensure connections are secure. |
| Device not charging wirelessly | Misalignment, incompatible device, phone case, foreign objects. | Ensure proper alignment. Remove thick phone cases or metallic objects. Verify device supports magnetic wireless charging. |
| Device not charging via cable | Cable issue, device port issue, power bank low battery. | Try a different cable. Ensure the power bank has sufficient charge. Check device's charging port. |
| Slow charging | Using a non-fast charging adapter/cable, device not supporting fast charge, high temperature. | Use a PD-compatible adapter and cable. Ensure device supports fast charging. Move to a cooler environment. |
9. User Tips
- For optimal magnetic adhesion, ensure your phone case is compatible with MagSafe or is thin enough not to interfere with the magnetic connection.
- When traveling, this power bank is designed to be "Worry-free Power For Traveling" and can typically be taken on airplanes, but always check airline regulations for portable electronic devices.
- To maximize charging speed, use a power adapter that supports PD (Power Delivery) for charging the power bank itself.
- The slim 15.0mm thickness ensures it fits perfectly with your phone without obstructing the camera lens.
- The 10000mAh capacity provides approximately 1.8 charges for an iPhone 15 Pro, 1.7 charges for a Huawei Mate 50, and 1.6 charges for a Xiaomi 13. Actual results may vary.
10. Warranty and Support
Toocki products are manufactured to the highest quality standards. For detailed warranty information or technical support, please refer to the official Toocki website or contact your retailer. Keep your purchase receipt as proof of purchase.
A comprehensive user manual is also available in PDF format for download: Download PDF User Manual
