Introduction
Welcome to the user manual for your new SKMEI 2328 Sports Digital Electronic Watch. This guide provides comprehensive instructions on how to set up, operate, and maintain your watch to ensure optimal performance and longevity. The SKMEI 2328 combines analog and digital displays with multiple features, making it a versatile timepiece for various activities.
Video: Overview of SKMEI 2328 watch features, including band flexibility, water resistance, and luminous display.
Setup
1. Unpacking and Initial Inspection
Carefully remove your watch from its packaging. Inspect the watch for any visible damage. Note that the watch is typically packaged without a gift box; any boxes shown in promotional materials are for display purposes only.
2. Adjusting the Watch Band
The SKMEI 2328 features a durable rubber band with a hook buckle. Adjust the buckle to comfortably fit your wrist. The band is designed to be flexible and secure for active use.
3. Battery Information
The watch comes with a CR2016 battery included. No initial battery installation is required for first use.
Image: Watch back cover with model number and battery type.
Operating Instructions
The SKMEI 2328 watch features four buttons for various functions. Refer to the diagram below for button identification and their primary roles.
Image: Detailed feature set and operating instructions diagram.
Button Functions:
- LIGHT / - Button: Activates the EL backlight for visibility in low light conditions. Also used to decrease values during setting.
- START/STOP / + Button: Used to start and stop the chronograph, and to increase values during setting.
- MODE Button: Cycles through different display modes (Time, Chronograph, Alarm, World Time, Countdown).
- RESET Button: Resets the chronograph or confirms settings during adjustment.
Main Features:
- Led Display: Digital time and information display.
- Chronograph: Stopwatch function for measuring elapsed time.
- Complete Calendar: Displays date, day of the week, and month.
- Multiple Time Zone (World Time): Allows tracking of time in different global zones.
- Alarm: Set daily alarms.
- Week Display: Shows the current day of the week.
- Countdown: Timer function.
Setting the Time and Date:
Press the MODE button repeatedly until you reach the time setting mode. Use the START/STOP / + and LIGHT / - buttons to adjust the hours, minutes, and other parameters. Press the RESET button to move between settings or confirm. Specific steps may vary slightly; refer to the detailed diagram for visual guidance.
Luminous Display:
To activate and quickly display the luminous effect on the analog hands and markers, use a strong light source (such as a flashlight or the watch's own EL light) to illuminate the dial for approximately 40 seconds. This charges the luminous material, allowing it to glow in the dark.
Maintenance
Water Resistance:
The SKMEI 2328 watch is water-resistant up to 5 ATM (50 meters). This means it is suitable for daily use and can withstand splashes, sweat, and rain. However, it is NOT recommended for swimming, showering, or submersion in water. Avoid pressing buttons while the watch is wet or submerged to prevent water ingress.
Cleaning:
To clean your watch, wipe it gently with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the case, dial window, or band. For the rubber band, mild soap and water can be used, followed by thorough rinsing and drying.
Battery Replacement:
The watch uses a CR2016 battery. When the display becomes dim or the watch stops functioning, it may be time to replace the battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and maintain water resistance.
Troubleshooting
- Watch not displaying time or functions: Check if the battery needs replacement. Ensure no buttons are stuck.
- Luminous display not glowing: Expose the watch to a strong light source for at least 40 seconds to charge the luminous material.
- Water inside the watch: If water appears inside the watch, stop using it immediately and seek professional repair to prevent further damage.
- Buttons not responding: Ensure the watch is dry. If the issue persists, contact support.
Specifications
Image: SKMEI 2328 watch in white.
| Attribute | Detail |
|---|---|
| Brand Name | Skmei |
| Model Number | SKMEI 2328 |
| Item Type | Digital Wristwatches |
| Style | SPORT |
| Movement | Digital |
| Display Type | Analog-Digital |
| Case Material | Polyester (ABS) |
| Case Shape | Square |
| Case Thickness | 14.3mm |
| Dial Diameter | 44.8mm |
| Dial Window Material Type | Acrylic |
| Band Material Type | Rubber (TPU) |
| Band Width | 25mm |
| Band Length | 25.5cm |
| Clasp Type | Hook Buckle (Stainless Steel) |
| Water Resistance Depth | 5Bar (50M) |
| Features | Led Display, Chronograph, Complete Calendar, Multiple Time Zone, Alarm, Week Display |
| Battery Included | Yes (CR2016) |
| Boxes & Cases Material | No package |
| Origin | Mainland China |
| Certification | CE |
User Tips
- Luminous Display: For optimal luminous effect, expose the watch dial to a strong light source for approximately 40 seconds to charge the luminous material.
- Water Resistance: While the watch is water-resistant up to 5 ATM for daily use like hand washing or rain, it is not suitable for swimming, showering, or submersion in water. Always ensure the crown is pushed in completely.
- Button Operation: Familiarize yourself with the four buttons and their functions to quickly navigate between modes and settings.
Warranty and Support
For any issues, questions, or support needs regarding your SKMEI 2328 watch, please contact the seller or retailer from whom you purchased the product. They will be able to provide assistance with troubleshooting, warranty claims, or direct you to appropriate service channels.
