1. Introduction and Overview
This manual provides essential information for the safe and efficient operation of your SUMRY Hybrid Solar Inverter. The inverter is designed to combine solar PV power, utility grid power, and battery power to provide continuous power supply to your loads. It features a pure sine wave output, MPPT solar charge controller, and programmable supply priority for PV, battery, or grid sources.
Please read this manual thoroughly before installation and operation to ensure optimal performance and safety.
2. Safety Information
WARNING: This inverter generates high voltage. Installation and maintenance should only be performed by qualified personnel.
- Ensure all connections are secure and correctly polarized before powering on the unit.
- Do not expose the inverter to rain, snow, spray, or any liquids.
- Do not disassemble the inverter. There are no user-serviceable parts inside.
- Ensure adequate ventilation around the inverter to prevent overheating.
- Keep children away from the inverter.
- Always disconnect all power sources (PV, battery, grid) before performing any maintenance or cleaning.
3. Product Features
The SUMRY Hybrid Solar Inverter offers a range of advanced features for reliable power management:
- Pure sine wave output for sensitive electronics.
- Built-in MPPT solar charge controller for maximum power point tracking from PV arrays.
- Configurable input voltage range for home appliances and personal computers.
- Programmable supply priority for PV, battery, or grid.
- Auto-sensing 50Hz/60Hz frequency range.
- High efficiency up to 98%.
- Multiple communication interfaces: RS232/RS485 (Standard), GPRS/WIFI (Optional).
- Comprehensive protection functions including overcharge, over-discharge, overload, and short circuit.
Figure 1: Front view of the SUMRY Hybrid Solar Inverter highlighting key specifications.
4. Package Contents
Upon unpacking, please ensure all items are present and undamaged:
- SUMRY Hybrid Solar Inverter Unit
- User Manual
- Communication Cable (RS232/RS485)
- Mounting Hardware (screws, wall anchors)
If any items are missing or damaged, please contact your supplier immediately.
5. Setup and Installation
Follow these steps for safe and proper installation:
5.1 Site Selection
- Mount the inverter indoors in a cool, dry, and well-ventilated area.
- Avoid direct sunlight, heat sources, and moisture.
- Ensure sufficient clearance around the inverter for proper airflow (at least 20 cm on all sides).
- Mount on a solid surface capable of supporting the inverter's weight (e.g., 7.0kg for SP-4200).
5.2 Mounting the Inverter
- Use the provided mounting template (if available) or measure the mounting holes on the inverter.
- Mark the drilling points on the wall.
- Drill holes and insert wall anchors.
- Securely fasten the inverter to the wall using the provided screws.
5.3 Wiring Connections
Refer to the system connection diagram below for proper wiring. All wiring must comply with local and national electrical codes.
Figure 2: Typical system connection diagram for the Hybrid Solar Inverter.
- Battery Connection: Connect the battery bank (e.g., 24VDC or 48VDC) to the inverter's battery terminals. Ensure correct polarity (positive to positive, negative to negative). Install a DC breaker between the battery and inverter.
- PV Array Connection: Connect the solar modules to the PV input terminals. Ensure the PV array voltage and current are within the inverter's specifications (MPPT range 55-450VDC, Max PV Array Open Circuit Voltage 450VDC). Install a DC breaker between the PV array and inverter.
- AC Input Connection (Grid/Generator): Connect the utility grid or generator AC output to the inverter's AC input terminals. Install an AC breaker between the AC source and inverter.
- AC Output Connection (Loads): Connect your home appliances or other loads to the inverter's AC output terminals. Install an AC breaker for the loads.
- Communication Connection: Connect the RS232/RS485 cable to the communication port on the inverter and to your monitoring device (e.g., computer). GPRS/WIFI modules are optional and can be installed for remote monitoring.
Figure 3: Inverter terminals for battery and PV input.
Figure 4: Communication interface on the inverter.
6. Operating Instructions
Once all connections are made and verified, you can power on the inverter.
6.1 Powering On
- Ensure all external breakers (PV, battery, AC input, AC output) are in the OFF position.
- Turn on the battery breaker first. The inverter's display should light up.
- Turn on the PV array breaker.
- Turn on the AC input breaker (if connecting to grid/generator).
- Finally, turn on the AC output breaker to supply power to your loads.
6.2 Display and Control Panel
The inverter features an LCD display and several buttons for monitoring and configuration:
Figure 5: Inverter display and control panel.
- LCD Display: Shows real-time system status, input/output voltages, battery level, and error codes.
- Buttons: Typically include ESC, UP, DOWN, and ENTER for navigating menus and adjusting settings.
6.3 Programmable Settings
The inverter allows you to configure various parameters, including:
- Output Source Priority: Set the preferred power source (e.g., Solar first, Utility first, SBU - Solar-Battery-Utility).
- Charging Source Priority: Define which source (Solar, Utility, or both) charges the battery.
- Battery Type: Select the type of battery connected (e.g., AGM, Flooded, Lithium).
- Charging Current: Adjust the maximum battery charging current.
- AC Input Voltage Range: Select between 'Appliances' (90-280VAC) or 'UPS' (170-280VAC) mode.
Consult the detailed menu structure in the full manual for specific navigation and setting adjustments.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your inverter.
- Cleaning: Periodically clean the exterior of the inverter with a dry cloth. Ensure ventilation openings are free from dust and debris.
- Connection Checks: Annually inspect all electrical connections (PV, battery, AC input/output) for tightness and corrosion. Tighten any loose connections.
- Battery Inspection: If using lead-acid batteries, check electrolyte levels (for flooded batteries) and terminal conditions.
- Environmental Check: Ensure the installation environment remains within specified temperature and humidity ranges.
WARNING: Always disconnect all power sources before performing any cleaning or inspection.
8. Troubleshooting
If you encounter issues with your inverter, refer to the following basic troubleshooting steps:
- No Power Output:
- Check if the inverter is powered on and the battery is connected.
- Verify all breakers (battery, PV, AC input/output) are in the ON position.
- Check for any error codes on the LCD display.
- Ensure battery voltage is within the operating range.
- Low Power Output:
- Check PV array for shading or damage.
- Verify battery charge level.
- Ensure loads are not exceeding the inverter's rated power.
- Inverter Overheating:
- Check for blocked ventilation openings.
- Ensure ambient temperature is within the operating range.
- Reduce load if continuously running at maximum capacity.
For persistent issues or complex error codes, please contact technical support.
9. Specifications
Technical parameters for the SUMRY Hybrid Solar Inverter series:
| Parameter | SP-2200 | SP-3200 | SP-4200 (24VDC) | SP-4200 (48VDC) | SP-7000 |
|---|---|---|---|---|---|
| Rated Power | 2200VA/1800W | 3200VA/3000W | 4200VA/3800W | 4200VA/3800W | 7000VA/6200W |
| INPUT | |||||
| Voltage | 230VAC | ||||
| Selectable Voltage Range | 170-280VAC (for personal computers) 90-280VAC (for home appliances) | ||||
| Frequency Range | 50Hz/60Hz (Auto sensing) | ||||
| OUTPUT | |||||
| AC Voltage Regulation (Batt.Mode) | 230VAC±5% | ||||
| Surge power | 4400VA | 6400VA | 8000VA | 8000VA | 14000VA |
| Transfer Time | 10ms (for personal computers) 20ms (for home appliances) | ||||
| Wave form | Pure Sine Wave | ||||
| BATTERY & AC CHARGER | |||||
| Battery Voltage | 12VDC | 24VDC | 24VDC | 48VDC | 48VDC |
| Floating Charge Voltage | 13.5VDC | 27VDC | 27VDC | 54VDC | 54VDC |
| Overcharge Protection | 15.5VDC | 31VDC | 31VDC | 61VDC | 61VDC |
| Maximum charge current (AC) | 60A | 80A | 60A | 80A | |
| SOLAR CHARGER | |||||
| MAX.PV Array Power | 2000W | 3000W | 6000W | 6000W | 6000W |
| MPPT Range@ Operating Voltage | 55-450VDC | ||||
| Maximum PV Array Open Circuit Voltage | 450VDC | ||||
| Maximum Charging Current (Solar) | 80A | 110A | 80A | 110A | |
| Maximum Efficiency | 98% | ||||
| PHYSICAL | |||||
| Dimension.D*W*H(mm) | 405*286*98mm | 423*290*100mm | 423*310*120mm | ||
| Net Weight (kgs) | 4.5kg | 5.0kg | 7.0kg | 8.0kg | |
| Communication Interface | RS232/RS485 (Standard) GPRS/WIFI (Optional) | ||||
| OPERATING ENVIRONMENT | |||||
| Humidity | 5% to 95% Relative Humidity (Non-condensing) | ||||
| Operating Temperature | -10℃ to 55℃ | ||||
| Storage Temperature | -15℃ to 60℃ | ||||
10. User Tips
To maximize the performance and lifespan of your SUMRY Hybrid Solar Inverter:
- Optimize PV Placement: Ensure your solar panels are positioned for maximum sun exposure throughout the day to get the most out of the MPPT charge controller.
- Battery Health: Regularly monitor your battery bank's health. Proper battery maintenance is crucial for system efficiency and longevity.
- Load Management: Avoid consistently overloading the inverter. Distribute your loads efficiently and consider the surge power capacity for starting motors or other high-inrush current devices.
- Monitoring: Utilize the communication interfaces (RS232/RS485, optional GPRS/WIFI) to monitor system performance and identify potential issues early.
11. Warranty and Support
The SUMRY Hybrid Solar Inverter comes with a 1-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use.
For warranty claims, technical assistance, or any questions not covered in this manual, please contact your original seller or SUMRY customer support with your product model and purchase details.