Introduction
Thank you for choosing the VIVOSUN 10x7x7 Ft. Large Walk-in Greenhouse. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new greenhouse. Please read these instructions carefully before beginning assembly and retain them for future reference.
Safety Information
- Ensure all components are present and undamaged before assembly.
- Assemble the greenhouse on a flat, level surface.
- Securely anchor the greenhouse to the ground to prevent wind damage.
- Do not use the greenhouse in extreme weather conditions without additional reinforcement.
- Keep children and pets away from the assembly area.
- Always follow local building codes and regulations for greenhouse installation.
Package Contents
Please verify that all parts are included in your package:
- Heavy-duty Galvanized Steel Frame components
- White PE Cover (Transparent Reinforced PE Cover)
- Fixed Ropes
- Anchoring Rings/Stakes
- Connectors and Fasteners
- Assembly Instructions (this manual)
Setup Instructions
1. Frame Assembly
- Unpack all galvanized steel frame components and lay them out.
- Connect the frame poles according to the diagram, ensuring all connections are secure and stable. The frame is designed for heavy-duty use.
- Assemble the base structure first, then gradually build upwards, forming the tunnel shape.
- Ensure all strong shelves (if included as separate components) are properly integrated into the frame structure for added stability.
2. Cover Installation
- Carefully unfold the Transparent Reinforced PE Cover over the assembled frame.
- Position the cover so that the roll-up zipper door is at the desired entrance location.
- Ensure the extra-long cover design extends sufficiently around the base to be buried or weighted down for stability and airtightness.
- Secure the cover to the frame using the provided fixed ropes and the double-stranded edge banding.
3. Securing the Greenhouse
- Utilize the fixed ropes and anchoring rings/stakes to firmly secure the greenhouse to the ground.
- For enhanced stability, especially in windy areas, consider burying the extra-long edges of the PE cover in soil or weighing them down with heavy objects.
Operating Instructions
1. Roll-up Zipper Door
- The greenhouse features a convenient roll-up zipper door for easy access.
- To open, unzip the door and roll it upwards, securing it with the ties provided to keep it open.
- To close, unfasten the ties, roll the door down, and zip it completely to maintain internal temperature and humidity.
2. Roll-up Mesh Windows
- The greenhouse is equipped with 6 side roll-up mesh windows to improve ventilation and temperature control.
- Open the windows by rolling up the outer cover and securing it, exposing the mesh. This allows air circulation while protecting plants from pests.
- Close the windows by unfastening and rolling down the outer cover to retain heat and humidity, especially during cooler periods or at night.
Maintenance
1. Cover Care
- The Transparent Reinforced PE Cover provides UV protection, improving solar heat and light retention, and is waterproof to protect plants from severe weather.
- Regularly inspect the cover for any tears or damage. Small tears can be repaired with greenhouse repair tape to prevent them from enlarging.
- Clean the cover periodically with mild soap and water to remove dirt and debris, ensuring maximum light penetration. Avoid harsh chemicals that could damage the PE material.
2. Frame Inspection
- Periodically check all frame connections and fasteners to ensure they remain tight and secure.
- Inspect the galvanized steel frame for any signs of rust or damage. Address any issues promptly to maintain structural integrity.
Troubleshooting
- Greenhouse instability: Ensure all anchoring points are securely fastened and the base of the cover is properly weighted or buried. Check all frame connections for tightness.
- Poor ventilation: Open the roll-up mesh windows and the zipper door to increase airflow. Consider adding small fans if natural ventilation is insufficient for your climate.
- Water pooling on cover: Ensure the cover is tautly installed to prevent sagging. Clear any accumulated debris (leaves, snow) from the roof.
Specifications
| Feature | Detail |
|---|---|
| Dimensions (L x W x H) | 10 x 7 x 7 Ft. |
| Frame Material | Heavy-duty Galvanized Steel |
| Cover Material | Transparent Reinforced PE Cover (White) |
| Door Type | Roll-up Zipper Door |
| Ventilation | 6 Side Roll-up Mesh Windows |
| Protection Features | UV Protection, Waterproof |
| Cover Design | Extra-long Cover Design, Double-stranded Edge Banding |
| High-concerned chemical | None |
| Origin | Mainland China |
User Tips
No specific user tips were available from customer reviews or Q&A for this product at the time of manual creation. However, general tips for greenhouse users include:
- Monitor internal temperature and humidity regularly, adjusting ventilation as needed.
- Ensure adequate watering for plants, as greenhouses can dry out soil faster.
- Consider adding a small fan for air circulation to prevent fungal diseases.
- In areas with heavy snow, gently remove snow accumulation from the roof to prevent structural stress.
Warranty and Support
For any questions regarding your VIVOSUN greenhouse, including assembly, missing parts, or operational concerns, please contact the seller or manufacturer's customer support. Please refer to your purchase documentation for specific warranty terms and contact information.
