1. Introduction
The LAUNCH X431 CRP129 MT is an Android-based multi-functional diagnostic tool specifically designed for motorcycles. It offers comprehensive diagnostic capabilities for a wide range of mainstream motorcycle brands, enabling technicians to quickly and accurately diagnose and repair motorcycles.
This tool supports OBD diagnostics and, for most systems, provides functions such as reading/clearing fault codes, reading data streams, checking version information, and performing actuator tests. Advanced features include instrument cluster coding, tire pressure monitoring system (TPMS) services, service light reset, idle adjustment, ABS control unit configuration, EOL mode, and transmission memory reset.
The CRP129 MT can record and playback live data streams, which is crucial for quickly and accurately locating sensor and component faults. Please note that specific supported functions may vary by vehicle model.
Key Features:
- Supports fault diagnostics for all systems of current mainstream motorcycle models.
- Ability to read and clear Diagnostic Trouble Codes (DTCs), read data streams, and view version information.
- One-key software upgrade for convenience.
- Designed on the Android platform with a simple and easy-to-operate software interface.
- Comes with multiple adapters and a universal jumper cable for broad compatibility.
- Supports various special functions like coding, reset, and relearn.
Supported Diagnostic Languages:
English, French, Spanish, German, Korean, Japanese, Portuguese, Italian, Traditional Chinese, Russian, Polish.
Supported Motorcycle Brands:
Agusta, Aprilia, BETA, BMW Motor, BRP, CFMOTO, Demo, Ducati Motor, Moto Guzzi, Harley-Davidson Motor, Hero, HONDA Motor, Bajiaj, Indian Motor, Kawasaki Motor, Keller, KTM, Kymco, Peugeot, Polaris Motor, Royal Enfield, Suzuki Motor, SYM, Triumph, Vespa, Victory Motor, Yamaha Motor.

Figure 1.1: Partial list of supported motorcycle brands (American, European, Asian).

Figure 1.2: Additional supported motorcycle brands.

Figure 1.3: Further supported motorcycle brands.
2. Components & Controls
The LAUNCH X431 CRP129 MT diagnostic tool features a user-friendly design with clearly labeled components and controls for efficient operation.

Figure 2.1: LAUNCH X431 CRP129 MT Diagnostic Tool.
Control Layout:
- Charging LED: Indicates charging status. Red means charging, Green means fully charged.
- LCD: Displays test results and user interface.
- USB Type-C Port: Used for connecting the charging cable to power the tool.
- DB-15 Diagnostic Connector: Connects the diagnostic cable to the tool.
- Power Button: Press and hold to turn the tool on or off. Short press to wake up or lock the screen.
- HOME Button: Navigates to the Main Menu screen.
- Selection Buttons (Up/Down/Left/Right):
- Up/Down: Move cursor for selection.
- Left/Right: Move cursor for selection or turn pages when multiple pages are displayed.
- OK Button: Confirms a selection or action from a menu list.
- Return Button: Exits the current screen or returns to the previous screen.
3. Technical Specifications
| Parameter | Value |
|---|---|
| Screen Size | 5 inches, 1280×720P touch screen |
| Android Version | Android 8.1 |
| CPU | 1.3GHz Quad-Core |
| RAM | 2GB |
| Storage Space | 64GB (approx. 25.13GB available as shown in system) |
| Battery Capacity | 3.7V / 6000mAh |
| OBDII Input Voltage Range | 9~18V |
| Charging Method | DC 5V 2A charging cable (Type-C Port) |
| Main Cable Interface | DB15 (double row) → OBDII 16PIN |
| Wi-Fi | Supports 2.4GHz & 5GHz dual band |
| Bluetooth | Yes (for BST360 extension only) |
| Dimensions | 228 mm x 125 mm x 34 mm |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Charging Temperature | 0°C to 40°C (32°F to 104°F) |
| Update Method | Online update |
| Product Gross Weight | 5.61 kg |
| Package Dimensions | 435 × 177 × 372 mm |
Note: The operating temperature refers to the temperature at which the scan tool works normally in non-charging status.
4. Packing List
The following items are typically included in the package. Please verify the contents upon receipt.
- Diagnostic tool x 1
- OBD II diagnostic cable x 1
- Charging cable x 1
- User manual x 1 (This document serves as the user manual)
- Quick start guide x 1
- Motorcycle adapters (optional, depending on the specific kit)

Figure 4.1: Contents of the LAUNCH X431 CRP129 MT package.
5. Setup and Initial Use
5.1 Charging and Powering On/Off the Tool
To Charge the Tool:
- Connect one end of the supplied charging cable into the USB Type-C port of the tool.
- Connect the other end to an external power supply device (e.g., USB wall adapter).
- For motorcycles with a 16-pin diagnostic port, the tool can automatically receive power when connected directly to the motorcycle's diagnostic port using the supplied diagnostic cable.
- The Charging LED will illuminate solid green when the battery is fully charged.
Note: Do not charge the tool using the charging cable while it is communicating with a motorcycle.
To Turn On/Off the Tool:
- To turn on: Press and hold the POWER button.
- To turn off: Press and hold the POWER button until a popup screen appears, then tap "Power Off".
5.2 Getting Started (First-Time Use)
If this is your first time using the tool, you will be guided through initial system settings:
- Press the power button to turn on the tool.
- The screen will display a welcome page. Tap "Start" to proceed.
- Choose your desired system language and tap "Next step".
- Select your time zone and tap "Next step" to enter the WLAN setup screen.
- Slide the Wi-Fi switch to ON. The system will search for available wireless LANs. Select your desired WLAN access point/network.
- If the network is open, the tool will connect directly.
- If the network is encrypted, you will need to enter the security password.
Figure 5.1: Example of Network Settings screen (from OCR'd manual).
(Image not available in ALLOWED_URLS, refer to the physical manual for visual reference of network settings screen.)
- After network connection, tap "Next step" to configure workshop information. Input the required details and tap "Next step".
Note: Configured workshop information will automatically be added to diagnostic reports.
- Read the user agreement terms and conditions. Check the box next to "Agree to all the above terms" and tap "OK" to finish the sign-up process and navigate to the Main Menu.
6. Operating the Diagnostic Tool
6.1 Main Menu Overview
The main menu screen provides access to the following function modules:
- Local Diagnose: Configures the tool for professional diagnostic operations.
- Remote Assistance: Allows repair shops or technicians to initiate remote diagnosis for faster issue resolution.
- Software Update: Updates motorcycle diagnostic software and APK. Requires a stable network connection.
- Diagnostic Record: View recorded running parameters or waveform graphs from diagnostics.
- Know Your Customer: Assists repair shops with business analysis, customer management, diagnosis statistics, and service ranking.
- Mine: Access saved reports, order information, and system settings.
- Toolbox: Contains practical add-on modules like battery voltage check, diagnostic software clear, firmware fix, DTC library, feedback, image management, and user manual.
- More: Includes Online support and LAUNCH Academy.
6.2 Diagnostic Connection
Follow these steps to connect the diagnostic tool to a motorcycle:
- Turn the motorcycle ignition off.
- Locate the motorcycle diagnostic port. Refer to your motorcycle's service manual if the port cannot be found.
- Connect the tool to the motorcycle using one of the following methods:
- For motorcycles with a 16-pin diagnostic port: Use the supplied OBD II diagnostic cable to connect the tool directly to the motorcycle's diagnostic port.
- For motorcycles with a non-16-pin diagnostic port: Use the supplied OBD II diagnostic cable along with the specific motorcycle adapter. For example, for Kawasaki, connect the specific Kawasaki adapter (4-pin or 6-pin) to the motorcycle's diagnostic port, then plug one end of the OBD II diagnostic cable into the adapter, and the other end into the DB-15 diagnostic connector of the tool. Tighten the captive screws.
Figure 6.1: Example of diagnostic cable connection for non-16-pin diagnostic port (from OCR'd manual).
(Image not available in ALLOWED_URLS, refer to the physical manual for visual reference of diagnostic cable connection.)
- Turn the ignition on. The engine can be off or running.
Caution: Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
The tool is now ready for diagnostics.
6.3 System Diagnostics (Local Diagnose)
The "Local Diagnose" function is used to diagnose electronic control systems. The tool must correctly identify the motorcycle to communicate and execute commands. Menus and test functions vary by motorcycle model, make, and year. Follow on-screen instructions.
Note: Ensure the corresponding motorcycle software is installed. The diagnostic menu may vary.
General diagnostic flowchart:
- Select "Local Diagnose".
- Select "Motorcycle Manufacturer".
- Select "Motorcycle Model".
- Select "Scan Mode" (Automatic System Detection / System Scan or Manual System Detection / System Selection).
- Select "Test Function".
6.3.1 Health Report (Quick Test)
This function quickly accesses all electronic control units (ECUs) and generates a detailed report on motorcycle health. Tap "Health Report" on the test item selection screen to start scanning ECUs. Once complete, a screen will display results, with fault codes in red and normal systems in green.
Figure 6.2: Example of Diagnostic Trouble Code screen (from OCR'd manual).
(Image not available in ALLOWED_URLS, refer to the physical manual for visual reference of Health Report screen.)
On-Screen Buttons:
- Enter: Selects other test functions.
- Report: Saves the diagnostic result as a report, accessible from "Mine" -> "My Report".
- Clear Code: Clears existing diagnostic trouble codes.
6.3.2 System Scan
Quickly scans for installed systems. After scanning, tap a system to test it and display the test function screen.
6.3.3 System Selection
Manually select the test system and function. Tap "System Selection" on the test item selection screen, then tap the desired system (e.g., EFI) to enter the test function selection screen.
Figure 6.3: Example of System Selection screen (from OCR'd manual).
(Image not available in ALLOWED_URLS, refer to the physical manual for visual reference of System Selection screen.)
- Version Information: Displays module information (hardware/software numbers).
- Read Fault Code: Displays detailed information of DTC records from the motorcycle's control system.
On-Screen Buttons:
- Help: View DTC help information.
- Code Search: Search for more information about the current DTC online.
- Report: Save current data in text format, accessible from "Mine" -> "My Report".
Note: DTCs are only one part of troubleshooting. Do not replace parts based solely on DTC definition. Follow testing procedures.
- Clear Fault Code: Erases codes after repairs. Ensure ignition is ON and engine is OFF before clearing.
Notes: Do not erase codes if taking the motorcycle to a Service Center. Clearing DTCs does not fix underlying problems; codes will reappear if repairs are not made.
- Read Data Stream: Retrieves and displays live data and parameters from the motorcycle's ECU. Tap "Read Data Stream" to view data stream items.
Figure 6.4: Example of Select Data Stream screen (from OCR'd manual).
(Image not available in ALLOWED_URLS, refer to the physical manual for visual reference of Select Data Stream screen.)
On-Screen Buttons:
- Select All: Selects all items on the current page.
- Unselect: Deselects all data stream items.
- OK: Confirms selection and proceeds.
Figure 6.5: Example of Data Stream Reading page (from OCR'd manual).
(Image not available in ALLOWED_URLS, refer to the physical manual for visual reference of Data Stream Reading screen.)
Data Display Modes:
- Value: Default mode, displays parameters in text list format.
- Graph: Displays parameters in waveform graphs.
- Combine: Merges values in waveforms for easier comparison, with different items marked in different colors.
On-Screen Buttons (Data Stream):
- Graph icon: View waveform graph of current data stream item.
- Combine: Merge values in waveforms.
- Report: Save current data as a diagnostic report.
- Record: Start recording diagnostic data. Recorded live data is valuable for troubleshooting. Accessible from "Diagnostic Record" on the main menu.
6.3.4 Special Function
This option provides coding, reset, relearn, and other service functions to restore motorcycle functionality after repair or replacement. Available tests vary by manufacturer, model, and year. Select the target special function and follow on-screen instructions.
6.4 OBDII Diagnostics
This function quickly checks for DTCs, identifies the cause of the Malfunction Indicator Lamp (MIL), checks monitor status for emissions testing, and verifies repairs. After connecting the tool, tap "OBDII". The tool will automatically detect the communication protocol. Once a link is established, the Monitor Status will display. Tap "ENTER" to access the following functions:
- Read I/M Readiness: Checks if emissions-related systems are operating correctly and ready for Inspection and Maintenance testing.
- Read Live Data: Retrieves and displays live data and parameters from the motorcycle's ECU.
- Read Freeze Frame: Captures a snapshot of operating conditions when an emission-related fault occurs.
- Read Fault Code: Identifies which section of the emission control system has malfunctioned.
- Clear Fault Code: Erases codes from the motorcycle after repairs. Ensure ignition is ON and engine is OFF.
- Test Results: On-Board Monitoring Test: Retrieves test results for non-continuously monitored emission-related powertrain components.
- Control Operation of On-Board Component/System: Accesses specific subsystem and component tests.
- Read Vehicle Information: Retrieves information (provided by the manufacturer) from the motorcycle's on-board computer.
- EU OBFCM: Displays On-Board Fuel Consumption Monitoring data to check compliance with EU CO2 emissions and fuel/energy consumption regulations.
6.5 History
The "History" function records details of each diagnostic session, allowing direct access to previously tested motorcycles. You can resume from the last operation or start a new test.
- Tap "History" on the "Local Diagnose" screen to view diagnostic records by date.
- Tap a motorcycle model to view details of its last diagnostic report.
- To delete specific history: Select it and tap "Delete". To delete all records: Tap "Select All" then "Delete".
- Tap "Quick access" to navigate directly to the function selection page of the last diagnostic operation.
7. Software Update
This function allows you to update the diagnostic software and APK. Regular updates are recommended for optimal performance and new features.
The tool includes two years of free software use and updates. After this period, the software remains usable but cannot be updated without purchasing a Subscription Renewal Card from the seller.
To update:
- Tap "Software Update" on the Main Menu to enter the update center.
- Ensure a stable network connection.
- Select the target software and tap "Update" to begin downloading. This may take several minutes.
- Once downloading is complete, the software packages will install automatically.
8. Maintenance and Toolbox Functions
The "Toolbox" module provides various utility functions for maintaining the device and assisting with diagnostics.
8.1 Battery Voltage
This option measures the current voltage of the motorcycle's battery.
8.2 Diagnostic Software Clear
Allows you to delete diagnostic software that is not frequently used, freeing up storage space.
8.3 Firmware Fix
Use this module to upgrade and fix diagnostic firmware. During this process, do not cut power or switch to other screens.
8.4 DTC Library
This option allows you to retrieve detailed descriptions of specific Diagnostic Trouble Codes (DTCs) from the tool's internal database.
Figure 8.1: Example of DTC Library screen (from OCR'd manual).
(Image not available in ALLOWED_URLS, refer to the physical manual for visual reference of DTC Library screen.)
To use: Swipe the screen up/down to alter the DTC value, then press "OK" to display the definition.
8.5 Image
This module allows you to manage or share screenshots taken with the tool.
8.6 Product Manual
A detailed operation manual (similar to this document) is integrated into the tool for quick reference.
9. Troubleshooting and Support
9.1 Remote Assistance
The "Remote Assistance" function is designed to help repair shops and technicians receive remote support, facilitating faster resolution of diagnostic issues. You can initiate remote assistance via TeamViewer.
To use: Tap "Remote Assistance" on the Main Menu. Provide your device's ID number to the remote technician or after-sales personnel to grant them authorization to remotely operate the device. This allows for guided troubleshooting.
9.2 FAQ (Frequently Asked Questions)
The "FAQ" module within the tool lists common questions and answers related to its operation and functionality.
9.3 Feedback
This module allows you to send feedback regarding any diagnostic problems encountered to LAUNCH for further analysis and troubleshooting.
9.4 System Settings for Troubleshooting
The "Mine" -> "Settings" module allows you to customize various system preferences that might impact operation:
- Units of measurement: Set to Metric or Imperial.
- Screen capture: Enable/disable the screenshot icon.
- Display/Brightness: Adjust standby time and screen brightness. (Reducing brightness conserves power.)
- Sound: Adjust volume and other sound settings.
- Network: Manage WLAN connections for updates and email.
- Time zone: Set the device's time zone.
- Language: Change the system language.
- Workshop information: Configure workshop details for reports.
- Recovery: Reset the tool to default factory settings.
Warning: Performing a factory reset may cause data loss. Proceed with caution.
- Clean up: Clear cache files to free up storage space.
- About: Displays hardware configuration and license agreement information.
10. User Tips
- Always ensure the tool's software is up-to-date for the best diagnostic coverage and functionality.
- When performing diagnostics, make sure the motorcycle's ignition is on, but the engine can be off unless specific tests require it to be running.
- For non-16-pin diagnostic ports, correctly identify and use the appropriate motorcycle adapter to ensure a stable connection.
- Utilize the "Diagnostic Record" function to save and review diagnostic sessions, which can be helpful for tracking intermittent issues or for future reference.
- If encountering persistent issues, use the "Feedback" module to report problems to LAUNCH support, providing your product's Serial Number for quicker assistance.
11. Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the tool, read this user's manual carefully and observe the following safety precautions at a minimum whenever working on a vehicle:
- Never use this tool for any application other than for which it was designed.
- There are no user-serviceable parts. Have the device serviced by a qualified repair person using only identical replacement parts. Disassembling the device will void the warranty.
- This tool contains an internal Lithium Polymer battery. Do not disassemble, crush, pierce, or dispose of the battery in fire or water to reduce the risk of fire or burns.
- This product is not a toy. Do not allow children to play with or near this item.
- Do not expose the device to rain or wet conditions.
- Do not place the device on any unstable surface.
- Never leave the device unattended during the charging process. The device must be placed on a non-flammable surface during charging.
- Handle the device with care. If the device is dropped, check for breakage and any other conditions that may affect its operation.
- Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
- Keep the tool dry, clean, and free of oil, water, or grease. Use a mild detergent on a clean cloth to clean the enclosure when necessary.
- People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to a heart pacemaker could cause pacemaker interference or failure.
- Always perform automotive testing in a safe environment.
- Do not attempt to operate or observe the tool while driving a vehicle. This will cause driver distraction and could cause a fatal accident.
- Wear safety eye protection that meets ANSI standards.
- Keep clothing, hair, hands, tools, test equipment, and other objects away from all moving or hot engine parts.
- Operate the vehicle in a well-ventilated work area. Exhaust gases are poisonous.
- Chock the drive wheels and never leave the vehicle unattended while running tests.
- Use extreme caution when working around the ignition coil, distributor cap, ignition wires, and spark plugs. These components create hazardous voltages when the engine is running.
- Put the transmission in P (for A/T) or N (for M/T) and make sure the parking brake is engaged.
- Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires within the work area.
- Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
12. Warranty and Customer Support
12.1 Warranty Information
This warranty is expressly limited to persons who purchase LAUNCH products for purposes of resale or use in the ordinary course of the buyer's business.
LAUNCH electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user.
This warranty does not cover any part that has been abused, altered, used for a purpose other than for which it was intended, or used in a manner inconsistent with instructions regarding use. The exclusive remedy for any automotive meter found to be defective is repair or replacement, and LAUNCH shall not be liable for any consequential or incidental damages.
Final determination of defects shall be made by LAUNCH in accordance with established procedures. No agent, employee, or representative of LAUNCH has any authority to bind LAUNCH to any affirmation, representation, or warranty concerning LAUNCH automotive meters, except as stated herein.
12.2 Customer Service
If you have any questions on the operation of the unit, contact the seller, or contact the LAUNCH TECH Service Center:
- Website: https://en.cnlaunch.com
- Phone: +86 755 8455 7891
- Email: overseas.service@cnlaunch.com
To resolve your problems quickly and efficiently, clearly indicate the Serial Number of your product when giving issue feedback.
13. Compliance Information
FCC ID: XUJCRP123XV3
IC: 29886-CRP129MT
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Innovation, Science and Economic Development Canada’s licence-exempt RSSs and part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference; and
- This device must accept any interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
The device for operation in the band 5150-5250MHz is only for indoor use.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RF Exposure Information and Statement (SAR)
This product meets government requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
The SAR limit is 1.6 W/kg averaged over one gram of tissue. This device has been tested against this SAR limit for typical body-worn operations 0mm from the body. To maintain compliance with RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user's body, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
This device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. The RF frequencies can be used in Europe without restriction.