NOVSIGHT A500 N94 RHD LED Headlight Bulbs User Manual

1. Product Overview

The NOVSIGHT A500 N94 RHD LED Headlight Bulbs are designed to provide superior illumination for your vehicle, featuring a perfect beam pattern with no glare or dark spots for safer right-hand driving. These bulbs are equipped with car-level customized large chip lamp beads, a built-in CANBUS driver, and advanced cooling technology for long-lasting performance.

2. Specifications

Available Socket Types:

• H4/9003/HB2 Hi/Lo
• H7
• H11
• 9005/HB3
• 9006/HB4

Product Dimensions:

Refer to the diagrams below for specific dimensions for each socket type.

3. Installation Guide

Installation is designed to be quick and straightforward, typically taking around 5 minutes per bulb. Always ensure your vehicle's engine is off and the battery is disconnected before beginning installation.

General Installation Steps:

1. Remove the original headlight bulb from its housing.
2. Insert the NOVSIGHT LED bulb into the light housing.
3. Rotate the bulb to lock it securely in place (typically 45° clockwise).
4. Connect the power line of the LED bulb to the original car lamp connector.

Specific Instructions by Socket Type:

• For H4/H7:
  1. Remove the socket.
  2. Install and fix the socket.
  3. Insert the lamp body as indicated by the arrow.
  4. Fix the lamp body by rotating 45° clockwise.
  5. Connect the power line with the original car lamp connector.
• For H8/H11/H13/H16JP/P13/9004/9005/9007/9006/PSX24/PSX26:
  1. Insert the lamp body as indicated by the arrow.
  2. Fix the lamp body by rotating 45° clockwise.
  3. Connect the power line with the original car lamp connector.

Chuck Adjustment (for H13/9004/9007):

The socket of H13/9004/9007 is adjustable for achieving a better lighting pattern. Adjust as needed after installation to optimize beam focus and cutoff.

4. Operating Instructions

Once installed, the NOVSIGHT LED headlight bulbs provide instant start-up and a bright, clear beam. The advanced lens optical patterns ensure accurate projection and minimize glare for oncoming traffic, enhancing safety for right-hand driving.

5. Maintenance

The NOVSIGHT LED headlight bulbs are designed for durability and minimal maintenance, thanks to their robust construction and advanced cooling system.

Cooling Technology:

These bulbs feature Ultra-High Cycle Cooling Technology with a 3210 Hydraulic Fan and Temperature Control System. This design ensures silent operation, high-speed cooling, double heat dissipation, and overall high efficiency in managing operating temperatures from -40°C to +80°C.

Environmental Adaptability:

With an IP68 waterproof and dustproof rating, these bulbs are built to withstand various harsh weather conditions, including foggy, rainy, snowy, and dusty environments, ensuring reliable performance.

Cleaning:

Periodically inspect the headlight lenses for dirt or debris. Clean with a soft, damp cloth if necessary. Avoid using harsh chemicals that could damage the lens or bulb components.

6. Troubleshooting

If you encounter any issues with your NOVSIGHT LED headlight bulbs, please refer to the following common troubleshooting tips:

• Bulb Not Lighting Up:
  • Check all electrical connections to ensure they are secure and properly seated.
  • Verify that the vehicle's headlight fuse is intact and not blown.
  • Ensure the bulb is correctly inserted and locked into the headlight housing.
• Flickering or Intermittent Light:
  • This can sometimes be caused by CANBUS system incompatibility. The built-in CANBUS driver in these bulbs should prevent most issues, but if flickering persists, an additional CANBUS decoder might be required for some sensitive vehicle models.
  • Check for loose connections at the bulb or vehicle wiring harness.
• Improper Beam Pattern or Glare:
  • Ensure the bulb is oriented correctly within the headlight housing. Some bulbs require specific rotational alignment for optimal beam pattern.
  • For H13/9004/9007 types, adjust the chuck to fine-tune the lighting pattern.
  • If the issue persists, professional headlight alignment may be necessary.
• Radio Interference:
  • These bulbs are designed with anti-radio interference features. If you experience interference, ensure all connections are tight and properly shielded.

If these steps do not resolve the issue, please contact customer support for further assistance.

7. Warranty and Support

Your NOVSIGHT LED Headlight Bulbs come with a 12-month warranty from the date of purchase.

Warranty Claim Procedure:

In the event of a product failure within the warranty period, please follow these steps:

1. Document the issue with clear photographs or videos.
2. If instructed by support, carefully cut down the connect wire of the faulty lamp body as shown in the product manual (refer to the 'Lamp body failure' section in the original PDF manual).
3. Take a picture of the cut wire and the faulty product.
4. Contact customer support with your purchase date, store information, and the documentation of the issue.

Please retain your proof of purchase (receipt, order confirmation) as it will be required for warranty claims.

For more detailed item guides and documents, including warranty specifics, you may refer to the official user manual PDF: User manual (PDF).

8. User Tips

• Vehicle Compatibility: Always double-check your vehicle's specific bulb type requirements before purchasing and installing to ensure proper fitment and function.
• Professional Installation: While designed for easy DIY installation, if you are unsure about any step, consider seeking professional installation to avoid potential damage or improper setup.
• Beam Pattern Check: After installation, test the beam pattern in a dark area to ensure it's properly aligned and doesn't cause excessive glare for other drivers. Adjust if necessary.
• Pair Purchase: These LED headlight bulbs are typically sold as a pair to ensure balanced illumination.