Foval F-800P (350W, 500W, 800W, 1000W variants)

Contents

Foval Pure Sine Wave Power Inverter

Instruction Manual

1. Introduction

Thank you for choosing the Foval Pure Sine Wave Power Inverter. This device converts DC (Direct Current) power from a battery into AC (Alternating Current) power, suitable for operating various household appliances and electronic devices. Our inverters are designed for high efficiency and reliability, providing clean power similar to grid electricity, making them ideal for sensitive electronics.

This manual provides essential information for the safe and efficient use of your power inverter. Please read it thoroughly before installation and operation, and keep it for future reference.

Foval Pure Sine Wave Power Inverter with battery cables and cigarette lighter adapter
Figure 1: Foval Pure Sine Wave Power Inverter with included accessories.

2. Safety Information

Please observe the following safety precautions to prevent injury and damage to the inverter or connected devices:

  • Do NOT open the inverter casing. There are no user-serviceable parts inside.
  • Ensure the inverter is OFF before connecting or disconnecting any appliances or battery terminals.
  • Always connect the inverter to a battery with the correct voltage (12V or 24V DC) as specified for your model. Mismatched voltages can cause severe damage.
  • Avoid placing the inverter in direct sunlight or near heat-sensitive materials, as it can become warm during operation.
  • Ensure proper ventilation around the inverter to prevent overheating.
  • Do not expose the inverter to water, rain, snow, or any liquids.
  • Keep children away from the inverter and its connections.
  • Always tighten positive (+) and negative (-) terminals securely. Loose connections can cause overheating due to poor contact.
  • Ensure the total rated power of connected devices does not exceed the continuous power rating of your inverter.

3. Product Overview

The Foval Power Inverter features a robust design with multiple ports and indicators for ease of use and safety.

Diagram showing the front and back of the Foval Power Inverter with labels for Battery Voltage display, On/off switch, AC Socket, LED indicator, USB ports, Positive port, Negative port, and Cooling fan.
Figure 2: Front and Rear Panel Components

Front Panel:

  • Battery Voltage Display: Digital LED display showing the input DC battery voltage.
  • On/Off Switch: Main power switch for the inverter.
  • AC Socket: Output socket for connecting AC appliances. Available in various types (EU, US, UK, AU, Universal).
  • LED Indicator: Indicates power status (green for power, red for fault).
  • USB Ports: 5V, 3.1A USB output for charging mobile devices.

Rear Panel:

  • Positive Port (+): Red terminal for connecting the positive battery cable.
  • Negative Port (-): Black terminal for connecting the negative battery cable.
  • Cooling Fan: Automatically activates to dissipate heat during operation.
Image showing different types of AC sockets: US Socket, AU Socket, UK Socket, Universal Socket, and EU Socket.
Figure 3: Available AC Output Socket Types

4. Setup and Installation

Follow these steps for safe and correct installation of your power inverter:

  1. Preparation: Ensure the inverter's ON/OFF switch is in the 'OFF' position.
  2. Connect to Battery:
    • Link the red cable to the Positive (+) terminal of the inverter and the Positive (+) terminal of the battery.
    • Link the black cable to the Negative (-) terminal of the inverter and the Negative (-) terminal of the battery.
    • Tighten both terminals securely to prevent loose connections and overheating.
  3. Connect Appliances: Ensure the inverter is still OFF. Plug your AC devices into the inverter's AC socket. For USB charging, connect devices to the USB ports.
  4. Power On: Press the ON/OFF switch on the inverter to the 'ON' position. The LED indicator should light up green, and the battery voltage will be displayed.
Diagram illustrating how to connect the inverter to a battery and an appliance. Steps include linking positive and negative terminals, tightening, connecting the battery, and pressing the switch. A warning states to ensure the inverter is off before connecting appliances and to match inverter input voltage to battery output voltage.
Figure 4: Connection Diagram and Important Voltage Matching Information

IMPORTANT: Ensure the Inverter Input Voltage matches the Battery Output Voltage (e.g., a 12V inverter for a 12V battery). Mismatched voltages will prevent the inverter from working or cause damage.

5. Operation

Once properly installed, operating your Foval Power Inverter is straightforward:

  • Powering Devices: After turning the inverter ON, you can power your AC devices by plugging them into the AC socket. For USB devices, use the USB ports.
  • Load Capacity: The inverter is designed to run most capacitive, inductive, and resistive loads. Always ensure the total power consumption of your devices does not exceed the inverter's continuous power rating.
  • Monitoring: The LED display shows the input battery voltage, allowing you to monitor your power source.
  • Cooling Fan: The smart cooling fan will automatically operate when needed to maintain optimal temperature.

WARNING: Do NOT leave the power inverter in the ON position while your car engine is off for extended periods, as this can drain your car battery.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your inverter:

  • Connection Check: Periodically check that all battery connections are tight. Loose connections can cause resistance, leading to heat buildup and potential damage.
  • Cleaning: Keep the inverter clean and free from dust and debris. Use a dry cloth to wipe the exterior. Do not use liquid cleaners.
  • Ventilation: Ensure the cooling fan and ventilation openings are not blocked.
  • Storage: When not in use for extended periods, store the inverter in a cool, dry place, disconnected from the battery.
  • Battery Disconnection: Always disconnect the positive battery terminal before performing any wiring or maintenance on the inverter.

7. Troubleshooting

The Foval Power Inverter is equipped with multiple protection features to ensure safe operation. If you encounter issues, refer to the following:

Diagram illustrating multi-protection features of the inverter: Short Circuit Protection, Reverse Polarity Protection, Overcurrent Protection, Over Voltage Protection, Overtemp Protection, and Overload Protection.
Figure 5: Multi-Protection Features
Common Issues and Solutions
Problem Possible Cause Solution
No output / Inverter not turning on
  • Loose battery connections
  • Battery voltage too low
  • Inverter switch is OFF
  • Blown fuse (internal)
  • Check and tighten battery cables.
  • Recharge or replace battery.
  • Turn the inverter switch to ON.
  • Contact support for fuse replacement (do not attempt yourself).
Inverter shuts down / Red fault LED
  • Overload protection triggered
  • Over-temperature protection triggered
  • Low/High voltage protection triggered
  • Short circuit
  • Reduce connected load.
  • Allow inverter to cool down; ensure proper ventilation.
  • Check battery voltage; recharge if low.
  • Disconnect all loads, turn off inverter, then restart. If fault persists, check for shorted appliance.
Fan not running
  • Inverter is not hot enough to activate fan
  • Fan malfunction
  • This is normal; fan activates automatically when needed.
  • Contact support if fan never activates under load.

8. Specifications

Below are the detailed specifications for the Foval Pure Sine Wave Power Inverter models:

Detailed specification table for LY-350W, LY-500W, LY-800W, and LY-1000W inverter models, listing Continuous Power, Peak Power, Input Voltage, Output Voltage, Output Waveform, Frequency, Efficiency, Size, and Weight.
Figure 6: Detailed Specifications for Inverter Models
General Specifications
Feature LY-350W LY-500W LY-800W LY-1000W
Continuous Power 350W 500W 800W 1000W
Peak Power 700W 1000W 1600W 2000W
Input DC Voltage 12V/24V 12V/24V 12V/24V 12V/24V
Output AC Voltage 220V 220V 220V 220V
Output Waveform Pure Sine Wave Pure Sine Wave Pure Sine Wave Pure Sine Wave
Frequency 50Hz/60Hz 50Hz/60Hz 50Hz/60Hz 50Hz/60Hz
Efficiency >90% >90% >90% >90%
Size (L*W*H) 200*112*55mm 200*112*57mm 240*112*60mm 268*112*58mm
Weight 0.55KG 0.7KG 0.85KG 1.02KG
Output Plug Type EU/US/UK/AU/Universal (varies by region/model)
Material Aluminum Alloy
Display LED Digital
Certificates CE, FCC, ROHS, PSE, ISO9001

9. User Tips

  • Voltage Matching: Always double-check that the inverter's input voltage (12V or 24V) matches your battery's output voltage. Using a 12V inverter with a 24V battery, or vice-versa, will cause damage.
  • Power Calculation: Before connecting multiple devices, calculate their total continuous power consumption to ensure it does not exceed your inverter's rating. Consider surge power for motor-driven appliances.
  • Cable Gauge: Use appropriate gauge cables for connecting to the battery. Thicker cables reduce voltage drop and heat, especially for higher wattage inverters.
  • Environment: For optimal performance and longevity, operate the inverter in a cool, dry, and well-ventilated area.

10. Package Contents

Your Foval Pure Sine Wave Power Inverter package includes:

  • 1 x Foval Power Inverter
  • 2 x Battery Crimper Cables (Red and Black)
  • 1 x Cigarette Lighter Plug Adapter
  • 1 x User Manual (this document)

11. Warranty and Support

The Foval Pure Sine Wave Power Inverter comes with a 1-year warranty against manufacturing defects. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Please have your purchase details and model number ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.