1. Product Overview
The JIKONG 7-inch V19 Touch Screen Display is designed to provide real-time monitoring and control for compatible Battery Management Systems (BMS). It offers a clear interface for viewing battery parameters, individual cell pack information, and supports advanced communication protocols like RS485 and CANBUS.
1.1. Key Features
- Wide Power Supply Range: Operates with a default range of 9V to 36V.
- Comprehensive Display: Shows battery total voltage, battery power, and single series voltage.
- High Baud Rate Support: Supports TTL/CMOS levels with a maximum baud rate of 921600bps.
- Multi-language Support: Chinese, English, Thai, and Vietnamese switchover.
- Customizable Interface: Allows for language, logo, and interface customization.
- Protection Functions: Includes Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection.
1.2. Compatibility
This display is exclusively compatible with the following JIKONG JK-PB Series V19 BMS models:
- JK-PB1A16S10PV19
- JK-PB1A16S15P
- JK-PB2A16S15PV19
- JK-PB2A16S20PV19
- JK-PB2A16S30PV19
Other BMS models are NOT compatible. Please verify your BMS model before use.

2. Specifications
2.1. General Parameters
| Parameter | Data |
|---|---|
| Display Category | TFT |
| Display Size | 7-inch |
| Resolution | 1024 * 600 |
| Backlight Type/Brightness | LED / 200 cd/m² |
| Viewing Angle (L/R/U/D) | 60°/60°/50°/40° |
| Operating Temperature | -10°C to +60°C |
| Storage Temperature | -20°C to +70°C |
2.2. Power Supply
| Parameter | Min | Max |
|---|---|---|
| Supply Voltage (with power reverse protection) | 9V | 36V |
| Power Dissipation | 2.7W (12V@225mA) | - |
2.3. Physical Dimensions

Display Dimensions:
- Overall Length (LENS OD): 187.00 mm
- Overall Width (LENS OD): 120.00 mm
- LCD Active Area (AA/VA): 154.08 mm x 85.92 mm
- Bezel Width: 12mm (top, bottom, left, right)

3. Setup and Installation
3.1. External Interfaces

The display features several interfaces for connection and functionality:
- User Interface: Used for power supply and serial port signal connection. Socket type: HY2.0mm-6P vertical stick.
- Key Extension Interface: Used to control BMS startup and shutdown. Socket type: GH1.25-6P vertical sticker.
- TF Card Interface: Connects a TF card for offline download and interface translation.

3.2. Pin Definitions (User Interface)
| Number | Name | Definition |
|---|---|---|
| 1 | K- | Activation signal negative electrode |
| 2 | K+ | Activate the positive signal |
| 3 | GND | Ground |
| 4 | TXD | Serial Port Output |
| 5 | RXD | Serial Port Input |
| 6 | VIN | Power Supply |
3.3. Pin Definitions (Key Extension Interface)
| Number | Name | Definition |
|---|---|---|
| 1 | K- | Activation signal negative electrode |
| 2 | K+ | Activate the positive signal |
| 3 | GND | Ground |
| 4 | TXD | Serial Port Output |
| 5 | RXD | Serial Port Input |
| 6 | VIN | Power Supply |
3.4. Cable Diagram

The standard cable length provided is 0.5 meters. Custom lengths may be available upon request.

4. Operation Instructions
4.1. APP Operation Instructions
To configure the display via the JIKONG BMS APP:
- Open the JIKONG BMS APP.
- Navigate to the "Parameter Setting" page.
- Change the "Serial port 3 protocol" to "015-JK BMS PBxx SERIES LCD Protocol V1.0".

4.2. Display Interface Operation Description
4.2.1. Battery Interface (Main Screen)
The main battery interface displays critical information about the battery string:
- Current voltage and current of the battery string.
- Number of online battery packs.
- Charging and discharging status of the entire battery string.
- Highest and lowest cell temperature.

4.2.2. Battery Pack Interface
In parallel mode, you can select individual battery packs to view detailed information:
- Design capacity and remaining capacity of the selected pack.
- Charging and discharging status of the selected pack.
- Voltage of each cell within the pack.
Up to 16 battery packs can be displayed.

4.2.3. Protocol Selection Interface
This interface allows you to select the appropriate communication protocols (RS485 and CANBUS) for your BMS setup.

You can choose from a list of available RS485 and CAN protocols to ensure proper communication with your BMS.
5. Troubleshooting: Fault Alarm Interface
The display features a fault alarm interface that indicates issues with the BMS or battery system. When the alarm icon lights up, a fault code will be displayed. Refer to the table below for a comparison of fault codes and their descriptions.
5.1. Fault Code Comparison Table
| Fault Code | Alarm Description |
|---|---|
| 1 | Single cell undervoltage alarm |
| 2 | Single cell overvoltage alarm |
| 3 | Overcurrent alarm |
| 4 | MOS overtemperature alarm |
| 5 | Battery overtemperature alarm |
| 6 | Short circuit alarm |
| 7 | Internal communication failure alarm |
| 8 | Balancing line resistance too high alarm |
| 9 | Cell string loss |
6. Maintenance
To ensure optimal performance and longevity of your JIKONG 7-inch V19 Touch Screen Display, follow these general maintenance guidelines:
- Cleaning: Gently wipe the screen with a soft, dry, lint-free cloth. For stubborn smudges, use a screen-safe cleaner applied to the cloth, not directly to the screen.
- Environmental Conditions: Operate and store the display within the specified temperature and humidity ranges to prevent damage.
- Connections: Periodically check all cable connections to ensure they are secure and free from corrosion or damage.
- Software Updates: Keep the associated JIKONG BMS APP updated to the latest version to benefit from new features and bug fixes.
Avoid exposing the display to direct sunlight for extended periods, extreme temperatures, or harsh chemicals.
7. User Tips
While no specific user tips were available from reviews or Q&A, here are some general recommendations for using the JIKONG 7-inch V19 Touch Screen Display:
- Verify Compatibility: Always double-check that your BMS model is listed as compatible with this display to avoid functionality issues.
- Secure Connections: Ensure all cables are firmly connected to prevent intermittent readings or disconnections.
- Regular Monitoring: Periodically check the display for any fault alarms or unusual readings to address potential issues early.
- App Integration: Utilize the JIKONG BMS APP for advanced settings and protocol configurations to get the most out of your display.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Refer to the official "Operation and maintenance manual" (PDF) for detailed support information.
A digital version of the user manual is available here: JIKONG 7-inch Display Operation and Maintenance Manual (PDF)