1. Introduction
The JIKONG JK-WBD6A20S20P is an intelligent active balanced Battery Management System (BMS) designed for various lithium battery chemistries, including Li-ion, LiFePO4, and LTO. This external BMS supports battery configurations from 4S to 20S and offers a continuous charge/discharge current of 200A. It features advanced active balancing technology to ensure optimal cell voltage equalization, enhancing battery lifespan and performance. The system includes multiple communication interfaces and protection functions for safe and reliable operation.
2. Package Contents
Upon unpacking, please verify that all items listed below are present and in good condition:
- BMS Unit (JK-WBD6A20S20P) x 1
- Screws x 4
- NTC Temperature Sensor (40cm long) x 2
- Sampling Line (70cm long) x 1

3. Specifications
The JIKONG JK-WBD6A20S20P BMS offers the following technical specifications:
| Feature | Specification |
|---|---|
| Model | JK-WBD6A20S20P |
| Battery Strings Supported | 4S-20S (Li-ion/LiFePO4/LTO) |
| Continuous Charge/Discharge Current | 200A |
| Balancing Current | 0.6A (Active Balanced) |
| Functionality | Bluetooth, Display, Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection |
| Communication Interfaces | RS485, CAN, BT (Bluetooth), NTC, Soft Switch, SOC Indicator, Key Switch, Active Equalizer |
| Voltage Detection Accuracy | ±0.015V |
| Short Circuit Protection Response | 10-500µs |
| Shell Material | Full Aluminum Alloy (for superior heat dissipation) |
| Environmental Protection | Dustproof, Waterproof, Anti-vibration |


4. Installation and Wiring
Proper installation and wiring are crucial for the safe and efficient operation of your JIKONG BMS. Please follow these steps carefully:
- Connect all the cables: Ensure all necessary communication and power cables are prepared.
- Insert the cable into the BMS: Carefully connect the sampling line and other interface cables to their respective ports on the BMS.
- Connect the B- line and the P- line to the battery: The B- line connects to the total negative terminal of your battery pack, and the P- line connects to the load/charger negative terminal.
4.1. Wiring Diagram for 8-String Cells

4.2. Wiring Diagram for 24-String Cells

Important Safety Note: Always ensure the battery pack is disconnected from any power source before performing wiring. Incorrect wiring can cause damage to the BMS, battery, or connected equipment, and poses a fire hazard. If unsure, consult a qualified professional.
5. Operation
The JIKONG BMS is designed for intelligent interaction and easy operation, providing comprehensive monitoring and control over your battery pack.
5.1. Active Balancing
The BMS features intelligent active balancing technology (0.6A balancing current) that continuously transfers energy between cells to equalize their voltage. This process occurs during charging, discharging, and idle states, significantly extending the battery's lifespan and improving overall performance. The system automatically adjusts balancing based on cell voltage differences.

5.2. Monitoring and Control
The BMS supports various methods for monitoring and adjusting parameters:
- Bluetooth (BT): Connect to the BMS wirelessly via a dedicated mobile application (available for iOS, Android, and HarmonyOS). The app allows you to view real-time data such as voltage, current, temperature, and state of charge (SOC), and adjust protection parameters.
- External Display: An optional external display unit can be connected to the BMS to provide a dedicated interface for viewing key battery information at a glance.
- PC Software: For advanced configuration and monitoring, the BMS can be connected to a computer via RS485 or CAN interfaces. This allows for detailed logging and adjustment of protection values like overcharge, overdischarge, overcurrent, and temperature thresholds.

To adjust protection values, first read the internal parameters of the protection board through the app or PC software, and then make the desired changes.
6. Maintenance
The JIKONG BMS is designed for durability and minimal maintenance. Adhering to the following guidelines will help ensure its longevity:
- Physical Protection: The BMS features a fully enclosed aluminum alloy shell, making it dustproof, waterproof, and anti-vibration. This design reduces damage from external environments. However, avoid exposing the unit to extreme physical shocks or prolonged submersion.
- Heat Dissipation: The full aluminum alloy shell provides superior heat dissipation. Ensure adequate airflow around the BMS, especially when operating at high currents, to prevent overheating. Do not obstruct the cooling surfaces.
- Connection Integrity: Periodically check all wiring connections for tightness and corrosion. Loose connections can lead to poor performance or safety hazards.
- Software Updates: Keep the mobile app and PC software updated to the latest versions to benefit from new features, improvements, and bug fixes.


7. Troubleshooting
The JIKONG Smart Active Balancer BMS is equipped with various protection mechanisms to ensure safe operation. If you encounter issues, consider the following common troubleshooting steps:
- No Power/No Display:
- Check all power connections, especially the B- and P- lines, and the main battery voltage.
- Ensure the BMS is correctly wired to the battery pack according to the provided diagrams.
- Verify the battery pack itself is charged and functional.
- Balancing Not Occurring:
- Confirm that the sampling lines are correctly connected to each cell.
- Check the voltage difference between cells using the app or display. Active balancing typically engages when a certain voltage difference is detected.
- Ensure the BMS is powered on and operating.
- Over-Protection Triggered (Overcharge, Overdischarge, Overcurrent, Short Circuit):
- The BMS will automatically cut off power to protect the battery. Identify the cause of the trigger (e.g., charger voltage too high, load current too high, short circuit in wiring).
- Once the issue is resolved, the BMS should reset automatically or can be reset via the app/display.
- Review the set protection parameters in the app/PC software to ensure they are appropriate for your battery pack.
- Bluetooth Connection Issues:
- Ensure Bluetooth is enabled on your mobile device.
- Make sure the BMS is within range and not obstructed by metal objects.
- Restart the mobile app and/or the BMS (if possible).
- Verify that the app is compatible with your device's operating system (iOS, Android, HarmonyOS).
For persistent issues, please refer to the detailed product specifications and consider contacting JIKONG customer support.
8. User Tips
- Initial Setup: Double-check all wiring, especially the balance leads, before connecting the main battery terminals. A multimeter can be used to verify cell voltages.
- Parameter Configuration: Take time to configure the overcharge, overdischarge, and overcurrent protection settings in the app to match the specific requirements and safety limits of your battery cells.
- Monitoring: Regularly monitor your battery pack's health through the mobile app. Pay attention to cell voltage differences, temperature, and overall state of charge.
- Heat Management: While the aluminum casing provides good heat dissipation, ensure the BMS is installed in a location with adequate ventilation, especially in high-current applications.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact JIKONG customer service or the authorized dealer from whom you purchased the product. Keep your purchase receipt as proof of purchase.
JIKONG Technology is committed to providing high-quality products and support. For more information about the company and its products, you may visit their official website or contact their support channels.
