Aramox Water Dispenser

Contents

Aramox Standing Top-Loading Hot and Cold Water Dispenser

User Instruction Manual

1. Product Overview

This manual provides essential information for the safe and efficient use of your Aramox Standing Top-Loading Hot and Cold Water Dispenser. Please read it thoroughly before operating the appliance and keep it for future reference.

Front view of the Aramox Standing Water Dispenser in a living room setting.

Figure 1: Aramox Standing Top-Loading Water Dispenser

2. Safety Instructions

  • Always place the dispenser on a firm, level surface.
  • Do not operate the dispenser if the power cord or plug is damaged.
  • Keep the dispenser away from direct sunlight, heat sources, and flammable materials.
  • Ensure proper ventilation around the appliance.
  • Unplug the dispenser before cleaning or performing any maintenance.
  • Do not allow children to operate the dispenser without supervision.
  • This appliance is designed for indoor use only.

3. Setup and Installation

  1. Unpacking: Carefully remove the dispenser from its packaging. Retain packaging materials for future transport if needed.
  2. Placement: Place the dispenser on a flat, stable, and level surface. Ensure there is adequate space (at least 10 cm) from walls for proper ventilation. Avoid placing it near heat sources or in direct sunlight.
  3. Initial Cleaning: Before first use, clean the water tank and all parts that come into contact with water. Use a mild detergent and rinse thoroughly with clean water. Wipe the exterior with a soft, damp cloth.
  4. Water Bottle Installation:
    • Remove the cap from a standard 3 or 5-gallon water bottle.
    • Place the water bottle onto the Smart Seat at the top of the dispenser. Press down firmly until the bottle is securely seated and water begins to flow into the dispenser's reservoir.
  5. Power Connection: Plug the power cord into a grounded 220V-240V electrical outlet.
  6. Priming the System: Before turning on the heating or cooling functions, dispense water from both the hot and cold spouts until water flows steadily. This ensures the tanks are filled and prevents damage to the heating element.
Front view of the water dispenser in a living room, highlighting its adaptability to various water barrel capacities.

Figure 2: Top-loading design accommodates various water barrel capacities.

4. Operating Instructions

Familiarize yourself with the dispenser's components:

Detailed diagram of the water dispenser with labels pointing to its components: Smart Seat, Indicator Light, Hot Water Button, Cold Water Outlet, Detachable Water Tray, Partition, Storage Box, and Tempered Glass Door.

Figure 3: Water Dispenser Components

  • Power On/Off: Use the main power switch (if present, usually at the back) to turn the unit on or off.
  • Hot Water Dispensing: Gently push the red Hot Water Button. Place your cup under the hot water outlet.
  • Cold Water Dispensing: Push your cup against the blue Cold Water Outlet lever. Place your cup under the cold water outlet.
  • Indicator Lights: The indicator lights on the control panel will illuminate to show the status of heating and cooling cycles.
  • Storage Box: The lower compartment features a generously sized storage box with an adjustable partition, offering versatile space for keeping essentials at hand. The Tempered Glass Door is dust-proof.

5. Maintenance and Cleaning

  • Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Detachable Water Tray: The large-capacity detachable water tray helps prevent leaking and should be emptied and cleaned regularly. Simply slide it out, empty, wash with mild soap, rinse, and replace.
  • Internal Cleaning (Descaling): Over time, mineral deposits may accumulate in the hot water tank. Consult the detailed PDF user manual for specific descaling instructions.
  • Smart Seat: Periodically clean the Smart Seat where the water bottle rests to ensure hygiene.
  • Long-Term Storage: If the dispenser will not be used for an extended period, unplug it, drain all water from the tanks, clean thoroughly, and store in a dry, cool place.

6. Troubleshooting

Problem Possible Cause Solution
No hot or cold water
  • Dispenser not plugged in or power switch off.
  • Water bottle empty.
  • Heating/cooling functions not turned on.
  • Insufficient time for heating/cooling.
  • Check power connection and switch.
  • Replace water bottle.
  • Ensure heating/cooling switches are on.
  • Allow 5 minutes for heating and 30 minutes for cooling.
Water leaking
  • Water bottle not seated correctly.
  • Detachable water tray is full or improperly placed.
  • Re-seat the water bottle firmly.
  • Empty and correctly position the water tray.
Unusual noise
  • Dispenser not level.
  • Compressor vibration.
  • Ensure dispenser is on a level surface.
  • Some compressor noise is normal; if excessive, contact support.

If problems persist, please refer to the detailed PDF user manual or contact customer support.

7. Specifications

Item Type Water Dispenser
Material PP, Tempered Glass
Housing Material Plastic
Weight Approx. 7405.00g / 261.2oz
Size (L x W x H) Approx. 86.4 x 27 x 26 cm / 34 x 10.63 x 10.24 inches
Function Cooling, Heating
Heating Time 0.8L / 5 minutes
Cooling Time 0.6L / 30 minutes
Voltage 220V-240V
Style Upright
Installation Stand
Certification CE

8. User Tips

  • Always ensure the water bottle is full before using the hot or cold functions to prevent damage to the internal components.
  • Regularly clean the detachable water tray to maintain hygiene and prevent spills.
  • For optimal performance and energy efficiency, place the dispenser in a cool, well-ventilated area away from direct sunlight.

9. Warranty and Support

For detailed warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. If you require technical support or have questions not covered in this manual, please contact the seller or manufacturer directly.

A comprehensive user manual in PDF format is available for download: View PDF User Manual

© 2023 Aramox. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.