Moman HA1 True Wireless Helmet Headset Instruction Manual

1. Product Overview

The Moman HA1 is a true wireless helmet headset designed for various outdoor activities such as skiing, snowboarding, motorcycling, and off-roading. It features an ultra-compact design, HD sound quality, intelligent noise reduction, and a glove-friendly remote control for convenient operation.

Package Contents

• 1 Pair of HA1 Headphones
• 1 Charging Case
• 1 Remote Control
• 1 USB Cable (Type-C)
• 4 Velcro Pads
• 1 Instruction Manual

2. Setup and Installation

2.1 Headset Installation

The HA1 headset features an innovative true wireless design for easy installation without tangled cables. It is ideal for helmets with audio-ready pockets or removable liners.

1. Prepare the Headset: Remove the white protective paper from the adhesive side of the Velcro pads.
2. Attach Velcro to Headset: Securely attach one Velcro pad to the back of each headset speaker.
3. Prepare Helmet: Identify the ear pockets or suitable flat surfaces inside your helmet where the speakers will be placed. Attach the remaining Velcro pads to these locations inside the helmet.
4. Mount Headset: Carefully attach each headset speaker to the corresponding Velcro pad inside your helmet. Ensure they are positioned comfortably over your ears.

2.2 Compatibility

The HA1 headset is mainly compatible with:

• Audio-ready helmets
• Ski helmets
• Snowboard helmets
• Three-quarter helmets
• Earmuff half helmets
• Vintage helmets

NOTE: Not compatible with most full face, modular, and rally helmets due to space constraints or design.

2.3 Bluetooth Pairing

The HA1 headset uses Wireless 5.3 technology for fast and stable one-step pairing.

1. Power On: Take the headphones out of the charging case. They will automatically power on and enter pairing mode.
2. Activate Bluetooth: On your mobile device (smartphone, GPS, etc.), enable Bluetooth.
3. Search for Device: Look for 'H360' (or similar) in the list of available Bluetooth devices.
4. Connect: Select 'H360' to connect. Once connected, you will hear an audible confirmation, and the device will be ready for use.

3. Operating Instructions

3.1 Remote Control Functions

The HA1 comes with a glove-friendly, IPX4 waterproof remote control that can be mounted on handlebars or ski poles for easy access.

• Play/Pause Key (Center Button): Press once to play or pause music.
• Volume Up / Previous Song (Top Button): Press once to increase volume. Long press to go to the previous song.
• Volume Down / Next Song (Bottom Button): Press once to decrease volume. Long press to go to the next song.
• Voice Assistant Activation: Long press the Play/Pause key for 5 seconds to wake up the AI voice assistant (e.g., Siri, Google Assistant).
• Answering/Ending Calls: Use the Play/Pause key to answer or end phone calls.

3.2 Audio Features

• HD Sound Quality: Enjoy clear bright treble, soft full mid-range, and mellow elastic bass with 42mm speakers and Hi-Fi articulation units.
• Intelligent Noise Reduction: The system actively reduces wind noise, providing a clearer audio experience during high-speed activities.

4. Maintenance and Charging

4.1 Charging the Headset and Case

The HA1 comes with a portable charging case that also serves as a power bank for the headphones.

• Charging Case Battery: 1900mAh capacity.
• Headphone Charging Time: Approximately 2 hours for a full charge.
• Working Time: Up to 10 hours on a single charge.
• Standby Time: Up to 50 hours.

The charging case features an LED display to clearly show the remaining power.

4.2 Waterproof Rating

Both the headset and the remote control are IPX4 waterproof, meaning they are resistant to splashing water from any direction. This makes them suitable for use in rain or snow.

Note: IPX4 rating does not mean they can be submerged in water.

5. Troubleshooting

• No Sound/Connection Issues:
  • Ensure the headset is charged.
  • Verify Bluetooth is enabled on your device and the headset is paired.
  • Try unpairing and re-pairing the headset with your device.
  • Ensure the headset is within range of your Bluetooth device.
• Wind Noise is Still Present:
  • While the HA1 has intelligent noise reduction, extreme wind conditions may still produce some audible noise. Ensure speakers are positioned correctly over your ears.
• Remote Control Not Responding:
  • Check if the remote control's battery is low.
  • Ensure the remote control is within close proximity to the headset.
  • Re-establish connection if necessary (refer to pairing instructions if the remote control needs separate pairing, though typically it's pre-paired).
• Voice Assistant Not Activating:
  • Ensure your phone's voice assistant is enabled and accessible.
  • Confirm you are long-pressing the Play/Pause button for the correct duration (5 seconds).

6. Specifications

7. User Tips

• Optimal Sound: For the best audio experience, ensure the speakers are positioned directly over your ears inside the helmet. Adjust their placement for maximum comfort and sound clarity.
• Remote Control Placement: Mount the remote control in an easily accessible location on your handlebars or ski pole, ensuring it doesn't interfere with your grip or movement.
• Battery Management: Always charge the case and headphones fully before long trips. The LED display on the charging case helps you monitor power levels.
• Helmet Compatibility: Double-check your helmet type against the compatibility list to ensure a proper fit and optimal performance.
• Voice Assistant: Familiarize yourself with the 5-second long press for voice assistant activation to quickly access navigation or communication features hands-free.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty claims.