Ubricks E2002

Contents

Ubricks E2002 Wind Turbine Model Instruction Manual

Model: E2002 | Brand: Ubricks

1. Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Ubricks E2002 Wind Turbine Detachable Machine Model. This educational building block set is designed for DIY manual assembly, featuring a realistic wind turbine structure with flexible rotation and an electrically driven mechanism. It is compatible with mainstream building block brands and aims to enhance hands-on ability, logical thinking, and spatial imagination.

Ubricks E2002 Wind Turbine Model (1.6m version) overview

Figure 1: Ubricks E2002 Wind Turbine Model (1.6m version) highlighting key features.

Ubricks E2002 Wind Turbine Model (2.5m version) overview

Figure 2: Ubricks E2002 Wind Turbine Model (2.5m version).

2. Safety & Warnings

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • CHOKING HAZARD: This product contains small building block parts, wheel accessories, and tiny connectors. Keep away from children.
  • Children shall use this product under the continuous supervision of adults.
  • Not suitable for children under 6 years old.
  • Keep unused small parts away from infants and young children to prevent ingestion accidents.
  • Do not put any parts of the product into the mouth, nose, or ears to avoid suffocation, choking, or ingestion accidents.
  • Abnormal use such as violent disassembly and random splicing may cause sharp edges and structural failure, leading to safety risks.
  • Store the product in a dry, cool, and ventilated environment. Avoid high temperature, humidity, and direct sunlight. Keep away from fire sources and corrosive substances.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Do not charge the battery unattended.
  • Do not charge the battery near heat sources or flammable materials.
  • Do not disassemble, crush, puncture, short-circuit, or expose the battery to fire.
  • Stop using the battery immediately if it becomes swollen, overheated, leaks, or is damaged.

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

3. Specifications

Attribute Detail
Product Name Toys Building Blocks Set - Machine Model (Wind Turbine)
Model Number E2002
Brand Ubricks
Quantity (1.6m version) 1184 PCS
Recommended Age 14+ Years Old
Material High-quality ABS plastic (non-toxic, odorless, durable, smooth edge treatment)
Scale 1:40
Dimensions (1.6m version) Total Height: 158.6 cm, Tower Height: 99.1 cm, Blade Diameter: 59.5 cm, Base Width: 25.6 cm
Gender Unisex
Origin Mainland China
Wind Turbine Dimensions Diagram

Figure 3: Dimensions of the Ubricks E2002 Wind Turbine Model (1.6m version).

Product Details Table

Figure 4: Detailed product specifications table.

4. Package Contents

The package contains all necessary components for assembly. Upon unpacking, please verify the presence of the following items:

  • Building blocks (1184 PCS for 1.6m version)
  • Electronic components (motor, battery box, etc.)
  • Remote controller (if equipped)
  • Rechargeable battery (if equipped)
  • USB charging cable
  • Instruction manual (this document and/or electronic version)

The parts are sorted into small sealed bags and placed in a super hard carton for protection during transit.

5. Assembly Instructions

Follow these steps carefully for correct assembly:

  1. Unpacking: Carefully unpack the product. Check all building blocks, electronics, remote controller, battery (if equipped), USB cable, and manual. Do not use if any parts are missing or damaged.
  2. Assembly: Assemble following the illustrated instructions provided in the electronic manual (PDF). Align blocks precisely and press evenly. Do not apply excessive force to prevent part damage.
  3. Modular Components: The model features modular components assembled via mechanical connection, ensuring structural stability and facilitating future disassembly and maintenance.
  4. 3-section Connection: The tower utilizes high-strength carbon fiber connectors internally for a 3-section connection, optimizing structural strength and enhancing assembly convenience.
  5. Simulated Base: The integrated distribution box with a 32x32 large base provides stable support for the wind turbine's safe and stable operation.
  6. Electromechanical Structure: The design incorporates an electromechanical structure where both the impeller and the blades are rotatable. Explore the sophisticated and complex mechanical structure during assembly.
  7. Full Modular Design: The overall design facilitates simulated hoisting by engineering vehicles and is compatible with the Ubricks 11200 crane for efficient and convenient construction.
Wind Turbine Structure Diagram

Figure 5: Labeled diagram of the wind turbine structure (Blade, Nacelle, Hub, Tower, Power box, Base).

Assembly Features Diagram

Figure 6: Illustrations of Modular Components, 3-section Connection, and Simulated Base.

Electromechanical Structure Diagram

Figure 7: Detailed view of the electromechanical structure, showing rotatable impeller and blades.

Full Modular Design Components

Figure 8: Components illustrating the full modular design for simulated hoisting.

Detailed Display Views of Power Box and Nacelle

Figure 9: Close-up views of the power box and nacelle/hub details.

6. Operation Instructions

  1. Battery Installation: Fit batteries into the model and remote controller (if applicable) with correct +/- polarity. Close the battery compartment securely.
  2. Charging: Fully charge the rechargeable battery before first use with the supplied USB cable and a certified 5V adapter. Unplug after charging.
  3. Power On: Press and hold the model's power button for about 2 seconds until the indicator lights up.
  4. Remote Pairing: Turn on the remote after powering up the model. Wait several seconds for automatic pairing. A steady indicator light means pairing succeeds.
  5. Operation: Run the model on flat, dry, open ground. Keep hands, hair, and loose clothes clear of moving parts. Avoid collisions, water, sand, and steep slopes.
  6. After Use: Power off the model and remote after use. Remove batteries for long-term storage. Keep the item in a cool, dry place away from sunlight and dampness.

6.1 Usage Restrictions

  • This universal building block model is designed for indoor use only. Avoid playing on rough, wet, or uneven surfaces to prevent structural damage and part wear.
  • Do not violently squeeze, drop, bend, or pull the assembled model. Rough operation may cause block breakage, loosening, or structural collapse.
  • Prohibit over-assembly or forced splicing of mismatched parts, as this can cause part damage and personal pinching injury.
  • This is a static assembly toy. Do not refit, modify, or install external power or electronic devices to avoid safety hazards and product damage.
  • The product is only for children's assembly and entertainment. Do not use it for bearing weight, supporting objects, or other non-toy purposes.

7. Maintenance & Storage

  1. Daily Cleaning: Wipe the surface of building blocks with a clean, soft cloth, or rinse briefly with clean water if needed. Do not soak the plastic parts in water for a long time to prevent plastic aging and deformation.
  2. Storage Method: After use, collect all parts and place them in the original package or a clean storage box. Avoid loss of small parts.
  3. Maintenance Notes: Do not expose the product to high temperature, low temperature, humid environment, or direct sunlight for a long time, as this can cause plastic aging, fading, and brittleness.
  4. Damaged Parts: If parts are damaged or missing during use, stop using them immediately to avoid sharp edges scratching hands.

Disposal: Do not dispose of this product with domestic waste; please recycle separately.

8. Troubleshooting

  • Model not powering on: Ensure batteries are correctly installed with proper polarity and fully charged. Check if the power button is held for the required duration (approx. 2 seconds).
  • Remote not pairing: Make sure both the model and remote are powered on. Allow several seconds for automatic pairing. If the indicator light on the remote does not become steady, try turning both off and on again.
  • Parts missing/defective: If you find defective, wrong, or missing parts, please refer to the Warranty & Support section for assistance.
  • Model not moving smoothly: Check for any obstructions in the moving parts. Ensure the model is operated on a flat, dry surface as per usage restrictions.

9. User Tips

  • Part Organization: Keep parts sorted in their sealed bags until needed to prevent loss, especially for small components.
  • Missing Parts: If you encounter missing parts, contact customer service with a parts list; a patch may be provided free of charge for one instance.

10. Warranty & Support

Ubricks provides a 12-month global after-sales warranty service for products with non-human damage.

  • Quality Issues: If the product has quality problems, missing parts, or damage during transportation, please contact our customer service team. Provide your order number and product photos for replacement.
  • Spare Parts: Free spare parts service is provided for conventional small parts loss within the warranty period.

For further assistance, please refer to the official user manual PDF: Ubricks E2002 Wind Turbine User Manual (PDF).

11. Compliance Information

11.1 Manufacturer & EU Representative

Manufacturer:

  • Company: Shenzhen Keji Toys Co., Ltd
  • Address: Daofeng Building, Dongkeng Community, Guangming District, Shenzhen City, China
  • Email: KOGIService@outlook.com

EU Authorized Representative:

  • Company: E-CrossStu GmbH
  • Address: Mainzer Landstr.69, 60329, Frankfurt am Main
  • Mail: E-CrossStu@web.de
  • Tel: +4969332967674

Importer:

  • Company: Shenzhen Keji Toys Co., Ltd
  • Address: Daofeng Building, Dongkeng Community, Guangming District, Shenzhen City, China

11.2 Applicable Official Regulations & Harmonized Standards

This toy product has passed authoritative professional testing and fully complies with EU, UK, and international toy safety regulations and harmonized standards. It has obtained valid market access compliance certifications and marks to meet overseas sales qualification requirements.

  • EU Toy Safety Directive: 2009/48/EC (Official Toy Safety Directive of the European Union)
  • Toy Mechanical & Physical Safety Standard: EN 71-1:2014+A1:2018
  • Toy Flammability Safety Standard: EN 71-2:2020
  • Toy Toxic Element Migration Limit Standard: EN 71-3:2019+A1:2021
  • Hazardous Substance Restriction Directive: 2011/65/EU (RoHS Directive)

11.3 Valid Compliance Markings

The product bears the following compliance markings:

  • CE (Conforms to European Union health, safety, and environmental protection requirements)
  • UKCA (Conforms to UK market entry safety standards)
  • FCC (Conforms to United States electromagnetic compatibility regulatory requirements)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.