1. Introduction
Thank you for choosing the AULA G7 Tri-Mode Gaming Headset. This headset is designed to provide a versatile audio experience for gaming, music, and calls across multiple platforms. It features three connectivity modes: wired, 2.4GHz wireless, and Bluetooth 5.0, ensuring compatibility and flexibility. With its ergonomic design, detachable noise-canceling microphone, RGB lighting, and long-lasting battery, the G7 headset is built for comfort and performance.
2. Product Layout and Controls
Familiarize yourself with the headset's components and controls for optimal use.
2.1. Headset Components
- Headband: Adjustable for a comfortable fit.
- Ear Cushions: Designed for all-day comfort.
- Microphone Boom Jack: Port for the detachable microphone.
- Type-C Port: Used for charging and wired connection.
- 3.5mm Jack: For wired audio input.
- Indicator Light: Provides status feedback (power, connection, charging).
- Microphone Boom: Detachable, omni-directional microphone.
2.2. Controls Overview
- Microphone Switch: Toggles the microphone on/off.
- Volume Control Knob: Adjusts the headset's audio output volume.
- Multi-function Button (Power On/Off / Play / Pause / Answer / Hang Up / RGB Light Switch / Mode Switch): This single button performs multiple functions based on press duration and frequency.
3. Setup and Connection
3.1. Unboxing and Initial Inspection
Carefully unpack the headset and all accessories. Ensure all components are present and undamaged. The package should include the headset, detachable microphone, 2.4G USB dongle, USB-C charging cable, and 3.5mm audio cable.
3.2. Power On/Off
- Power On: Press and hold the multi-function button for 1 second. The white light will flash, and you will hear the voice prompt "POWER ON".
- Power Off: Press and hold the multi-function button for 2 seconds. The pink light will flash, and you will hear the voice prompt "POWER OFF".
3.3. Connecting the Microphone
The microphone boom is detachable. Simply insert the microphone into the Microphone Boom Jack on the headset until it clicks into place. To remove, gently pull it out.
3.4. Bluetooth Connection
- Keep your mobile phone or device and the headset within 30 cm of each other for optimal pairing.
- Press and hold the multi-function button for 1 second. Release the button when the blue indicator light flashes, and the voice prompt "POWER ON" is heard. The headset is now in Bluetooth pairing mode.
- On your device, enable Bluetooth, search for available devices, and select "AULA-G7" to pair.
- Once successfully connected, the headset indicator will turn solid blue, and you will hear the voice prompt "Connected".
3.5. 2.4GHz Wireless Connection
- Insert the 2.4G USB dongle into an available USB port on your computer or compatible device.
- Press and hold the headset's multi-function button for 1 second to power it on. The headset will automatically attempt to connect to the USB dongle.
- Upon successful connection, the headset's white indicator will turn solid, and you will hear the voice prompt "Connected". The USB dongle's blue light will also turn solid.
3.6. Wired Connection (3.5mm or USB-C)
- 3.5mm Audio Cable: Connect one end of the 3.5mm audio cable to the 3.5mm Jack on the headset and the other end to your audio source. When the 3.5mm cable is inserted, the white indicator (2.4G mode) or blue indicator (Bluetooth mode) will turn off, indicating wired mode is active.
- USB-C Wired: Connect the USB-C charging cable to the headset's Type-C port and the other end to your device's USB port for a wired digital audio connection.
3.7. Switching Between 2.4GHz and Bluetooth Modes
To switch between 2.4GHz wireless and Bluetooth modes, triple-press the multi-function button. You will hear voice prompts indicating the current mode, such as "bluetooth mode pairing" or "adapter mode pairing".
4. Operating Instructions
4.1. Basic Functions (Multi-function Button)
- Play/Pause: Single press the multi-function button.
- Answer/Hang Up Call: Single press the multi-function button during an incoming or active call.
- RGB Lighting Control: Double press the multi-function button to cycle through RGB lighting modes or turn it off.
4.2. Volume Control
Use the Volume Scroll Wheel located on the headset:
- Scroll up to increase the volume.
- Scroll down to decrease the volume.
Note: The volume scroll wheel only controls the headset's internal volume. To adjust the overall volume on your computer, phone, or other connected devices, please use their respective volume controls.
4.3. Microphone Usage
The MIC Switch allows you to quickly mute or unmute your microphone:
- Push the switch up to turn on the microphone.
- Push the switch down to turn off (mute) the microphone.
5. Charging and Battery
5.1. Charging Instructions
To charge the headset, connect the USB-C charging cable to the headset's Type-C port and the other end to a suitable USB power source. The red indicator light will be on during charging and will turn off once the battery is fully charged.
5.2. Battery Status Indicators
- Low Battery Warning: The red indicator light will flash slowly (3 times over 5 seconds), accompanied by the voice prompt "battery low".
- Low Battery Shutdown: The red indicator light will be on for 1 second, followed by the voice prompt "power off", and the headset will power down.
5.3. Charging Precautions
- It is recommended to use only a computer USB port for charging the headphones.
- Do not use fast-charging cell phone chargers to charge the headphones.
- Avoid using inferior or non-standard power adapters.
- Do not use over-voltage or over-current power adapters.
- Keep the headset away from high-temperature equipment during charging.
- If the headset will not be used for a long time, turn off the power switch.
6. Troubleshooting
6.1. Headset Disconnection
- Bluetooth Disconnection: If the Bluetooth connection is lost, the blue indicator light will flash.
- 2.4GHz Disconnection: If the 2.4GHz connection is lost, the white indicator light will flash, and you will hear the voice prompt "Disconnected, pairing".
Solution: If disconnection occurs, try moving closer to your device or re-initiating the pairing process as described in Section 3.4 or 3.5.
6.2. Pairing Issues
The headset maintains pairing mode for 10 minutes in both 2.4GHz and Bluetooth modes. If pairing is not successful within this timeframe, the headset will automatically power off.
Solution: Ensure the headset is in pairing mode and within range of your device. If it powers off, turn it back on and try pairing again. The headset remembers previously paired devices and will attempt to auto-reconnect upon power on. If auto-reconnection fails within 10 minutes, it will power off.
6.3. No Sound or Low Volume
- Check the volume level on both the headset (using the scroll wheel) and your connected device.
- Ensure the correct audio output device is selected on your computer or console.
- If using a wired connection, ensure the 3.5mm or USB-C cable is fully inserted into both the headset and the audio source.
- If using wireless, ensure the headset is properly connected via Bluetooth or 2.4GHz dongle.
7. Specifications
| Feature | Specification |
|---|---|
| Model | G7 |
| Headset Weight (Net) | Approx. 260g |
| Material | ABS, Woven headband, Steel frame, Fiber fabric + Acoustic cotton Earpad |
| Power Input | DC5V 500mA |
| Charging Time | 3-4 hours |
| Battery Capacity | 1000mAh |
| Standby Time | 180 days |
| Working Time (2.4G mode) | Approx. 40 hours (LED off) |
| Working Time (Bluetooth mode) | Approx. 60 hours (50% volume, LED off) |
| Operating Distance | ≤10m |
| Speaker Type | Dynamic |
| Speaker Diameter | Φ40mm |
| Speaker Impedance | 16Ω |
| Max Input Power | 15mW |
| Frequency Range | 20Hz to 20kHz |
| Rated Sensitivity | 116 dB ±5 dB (IEC-318 at 1kHz 1mW) |
| Channel Imbalance | ≤3 dB |
| Microphone Rated Sensitivity | -38 dB (0 dB = 1 V/Pa at MRP position) |
| Microphone Impedance | RL < 2.2kΩ |
| Active Noise-Cancellation | Yes |
| Vocalism Principle | Other |
| Wireless Type | Bluetooth |
| Connectors | USB |
| Communication | Wired, 2.4GHz Wireless, Bluetooth |
| Style | Wireless headphone & headset |
| Origin | Mainland China |
8. Maintenance and Care
- Cleaning: Use a soft, dry cloth to clean the headset. Do not use harsh chemicals or abrasive materials.
- Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures. The rotatable and foldable earcups allow for easy storage.
- General Safety: Do not drop, disassemble, or expose the headset to fire, excessive heat, or liquids.
9. User Tips
- Optimal Wireless Performance: For the best wireless experience, ensure your headset is fully charged and keep it within the recommended operating distance (up to 10m) from your connected device.
- Volume Adjustment: Remember to adjust volume levels on both your headset and the connected device for precise audio control.
- Microphone Versatility: Take advantage of the detachable microphone. Attach it for clear communication during gaming or calls, and remove it for a more streamlined look when listening to music.
- RGB Customization: Experiment with the RGB lighting modes by double-pressing the multi-function button to match your setup or mood.
10. Warranty and Support
The AULA G7 Tri-Mode Gaming Headset comes with a 1-year warranty from the date of purchase.
For detailed product information, technical support, or warranty claims, please visit the official AULA website: www.aulagaming.ru
You can also refer to the full user manual in PDF format for more in-depth information: User Manual (PDF)
