cysum Nova

Contents

CYSUM Nova Off-Road Electric Bike User Manual

Model: Nova | Brand: CYSUM

1. Introduction

Thank you for choosing the CYSUM Nova Off-Road Electric Bike. This manual provides essential information for the safe assembly, operation, and maintenance of your new e-bike. Please read it thoroughly before your first ride and keep it for future reference.

2. Safety Information

Your safety is paramount. Please adhere to the following guidelines:

  • Always wear appropriate protective equipment, including a helmet, when riding.
  • Comply with all local laws and regulations regarding electric bicycles.
  • Be aware of potential fire risks associated with charging and storing the battery. Always follow charging instructions carefully.
  • Regularly inspect your e-bike for any signs of wear or damage before each ride.
  • Do not modify the e-bike's electrical system or components, as this may void your warranty and pose safety risks.
CYSUM Nova Electric Bike, front-left view

Figure 1: CYSUM Nova Electric Bike Overview

3. Setup and Assembly

Your CYSUM Nova e-bike may require some assembly upon arrival. Follow these general steps:

  1. Unpacking: Carefully remove all components from the packaging. Retain packaging for potential future transport or returns.
  2. Handlebar Installation: Attach the handlebar to the stem, ensuring all bolts are tightened securely.
  3. Front Wheel Installation: Install the front wheel, making sure the quick-release or axle nuts are properly secured and the brake rotor is correctly aligned with the caliper.
  4. Pedal Installation: Identify left (L) and right (R) pedals. Thread the pedals into the crank arms (left pedal is reverse-threaded). Tighten firmly with a wrench.
  5. Seat Post and Saddle: Insert the seat post into the frame and adjust the saddle height for comfortable riding. Secure with the quick-release lever or bolt.
  6. Initial Battery Charge: Before your first ride, fully charge the battery. Refer to the 'Battery Charging' section for detailed instructions.
  7. Tire Inflation: Inflate tires to the recommended pressure indicated on the tire sidewall.
  8. Brake Check: Test both front and rear brakes to ensure they are functioning correctly. Adjust if necessary.
CYSUM Nova Electric Bike, rear-right view

Figure 2: Rear view of the CYSUM Nova Electric Bike

4. Operating Instructions

4.1. Powering On/Off

Locate the power button on the display unit or battery. Press and hold to turn the e-bike system on or off.

4.2. Display Functions

The digital display provides crucial information about your ride:

Digital display screen showing speed, battery level, and trip distance

Figure 3: Digital Display Unit

  • Battery Level: Indicates the remaining charge.
  • Speed: Current riding speed (km/h).
  • Trip Distance: Distance covered during the current ride.
  • Assist Level: Shows the current level of pedal assistance.

4.3. Pedal Assist System (PAS)

The CYSUM Nova features a mid-drive motor with a pedal assist system. As you pedal, the motor provides assistance based on the selected assist level. Use the control buttons on the handlebar to cycle through different assist levels (e.g., Eco, Tour, Sport, Turbo).

4.4. Gear Shifting

Your e-bike is equipped with a SHIMANO 9-speed system. Use the shifters on the handlebar to change gears according to terrain and desired pedaling effort. Shift to lower gears for climbing hills and higher gears for flat terrain or descents.

4.5. Braking

The e-bike uses hydraulic disc brakes for reliable stopping power. Apply both front and rear brakes smoothly and evenly. Avoid sudden, hard braking, especially with the front brake, to prevent loss of control.

5. Maintenance

5.1. Battery Care

The 48V 14Ah lithium battery is designed to be easily removable for convenient charging and storage.

Diagram illustrating the removable battery pack

Figure 4: Removable Battery Pack

  • Charging: Use only the charger provided with your e-bike. Charge in a well-ventilated area, away from flammable materials. Do not overcharge.
  • Storage: If storing the bike for an extended period, charge the battery to 50-70% and store it in a cool, dry place. Recharge every 1-2 months to maintain battery health.
  • Cleaning: Keep battery terminals clean and dry.

5.2. Tires

  • Pressure: Check tire pressure before each ride. Maintain pressure within the range specified on the tire sidewall.
  • Inspection: Regularly inspect tires for cuts, punctures, or excessive wear.

5.3. Brakes

  • Inspection: Check brake pads for wear and replace them when necessary. Ensure brake levers have proper tension and engagement.
  • Adjustment: If brakes feel spongy or ineffective, they may need adjustment or bleeding by a qualified technician.

5.4. Drivetrain (Chain and Gears)

  • Cleaning: Keep the chain and gears clean from dirt and grime.
  • Lubrication: Lubricate the chain regularly with appropriate bicycle chain lubricant to ensure smooth shifting and prevent wear.

5.5. General Cleaning

Clean your e-bike with a damp cloth and mild soap. Avoid using high-pressure washers directly on electrical components or bearings.

6. Troubleshooting

This section addresses common issues you might encounter with your CYSUM Nova e-bike.

ProblemPossible CauseSolution
E-bike does not power onBattery not charged; Battery not properly seated; Loose electrical connectionCharge battery; Ensure battery is fully inserted; Check all visible connections
Motor not assistingPAS level set to zero; Brake levers engaged; Sensor issueIncrease PAS level; Release brake levers; Consult support if issue persists
Brakes feel weakWorn brake pads; Air in hydraulic system; Misaligned caliperReplace brake pads; Have system bled by technician; Adjust caliper alignment
Unusual noises from drivetrainDry chain; Dirty gears; Loose componentsClean and lubricate chain; Clean gears; Check for loose bolts

If you encounter issues not listed here or if solutions do not resolve the problem, please contact customer support.

7. Specifications

The following table details the technical specifications of the CYSUM Nova Off-Road Electric Bike:

CYSUM Nova Electric Bike, side view, showing full frame and components

Figure 5: CYSUM Nova Electric Bike with key components

FeatureSpecification
Model NumberNova
Brand Namecysum
MotorMid-drive, Brushless, 500W Rated (750W Peak)
TorqueUp to 140 N·M
Battery48V 14Ah Lithium battery (removable)
Voltage48V
Power Supply/SourceLithium battery
Range (Pure Electric)Approx. 40-50 kilometers
Range (Assist Mode)Approx. 80-120 kilometers
Tires27.5*2.2 inch
Brake SystemHydraulic Disc Brake
Speed SystemSHIMANO 9-speed
Maximum Speed38 km/h (Can be limited to 25 km/h)
Maximum Load150 kg
Recommended Rider Height165-195 cm
Net Weight33 kg
Gross Weight38 kg
Frame MaterialAluminum alloy
FoldedNo

8. User Tips

  • Removable Battery: The battery is designed for easy removal, allowing you to charge it conveniently at home or work, separate from the bike. This also aids in secure storage.
  • Regular Checks: Make it a habit to perform a quick safety check (brakes, tires, battery) before every ride.
  • Adjust Seat for Comfort: Ensure your seat height is adjusted correctly for optimal pedaling efficiency and comfort, as shown in Figure 6.
Close-up of the comfortable bike saddle with spring suspension

Figure 6: Ergonomic Saddle Design

9. Warranty and Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. If you require technical assistance or have questions regarding your CYSUM Nova e-bike, please contact customer support through the seller's official channels.

© 2023 CYSUM. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.