AMBITFUL Q3/Q7/Q9 Series Quick Release Softbox

Contents

AMBITFUL Q3/Q7/Q9 Series Quick Release Softbox Instruction Manual

Version: 1.0 | Last Updated: 2024-05-03

1. Introduction

This manual provides comprehensive instructions for the safe and effective use of your AMBITFUL Q3, Q7, or Q9 Series Quick Release Softbox. These softboxes are designed for various photography and videography applications, including portrait photography, live streaming, and outdoor shooting, offering professional soft light control.

2. Safety & Warnings

Important Safety Information

Please read all instructions carefully before using this product. Failure to follow these instructions may result in product damage or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.

3. Product Overview

The AMBITFUL Quick Release Softbox series offers versatile lighting solutions for photographers and videographers. These softboxes feature a quick-release mechanism for easy setup and breakdown, and are available in various sizes and mount types to suit different lighting needs.

Various Ambitful softboxes including octagonal and square shapes
Figure 1: Overview of AMBITFUL Q3, Q7, and Q9 series softboxes.

Key Features:

  • Quick Release Design: Allows for rapid setup and folding.
  • Double-Layer Diffuser: Softens light and reduces contrast for professional results.
  • Optional Honeycomb Grid: Narrows beam spread for precise light control.
  • Mount Compatibility: Q3 series features a Godox Mount (SA-GD Speed Ring), while Q7 and Q9 series feature a Bowens Mount.
  • Durable Construction: Made with reflective fabric and robust umbrella rods.
Comparison of bare light effect, softbox with double diffuser, and softbox with double diffuser and grid effect
Figure 2: Illustration of light effects with different diffuser and grid configurations.
Softbox with honeycomb grid attached
Figure 3: Fabric Grid for narrowing beam spread.

4. Setup and Assembly

Before First Use:

Remove all protective films from the device.

Opening Steps:

  1. Pull the rods open to a circular shape in preparation for opening.
  2. Hold the lower mount with your left hand and press down on the upper mount with your right hand.
  3. Installation is complete when you hear the locking sound.
Diagram showing three steps to open the softbox: pulling rods, pressing mounts, and locking into place.
Figure 4: Softbox Opening Steps.

Attaching Diffusers and Grid:

  • Attach the inner diffuser to the internal velcro tabs.
  • Attach the front diffuser to the outer velcro rim of the softbox.
  • If using, attach the honeycomb grid to the outermost velcro rim.
Video 1: Demonstrates the quick release softbox assembly and disassembly, including attaching diffusers.

Mounting to Light:

  • For Q3 Series (Godox Mount): The softbox features a detachable interface design compatible with Godox ML60/ML100/AD300PRO lights via an SA-GD Speed Ring.
  • For Q7/Q9 Series (Bowens Mount): These softboxes are suitable for all kinds of brand Bowens mount COB lights, film, and television lights.
  • An optional Q7F Bracket is available for direct mounting on the softbox, suitable for various brands of multi-size camera flash and pocket flash (purchased separately).
Image showing the detachable Godox mount on a Q3 softbox and its compatibility with Godox lights.
Figure 5: Q3 Detachable Godox Mount compatibility.
Image showing a Bowens mount adapter and various Bowens mount lights.
Figure 6: Bowens Mount compatibility for Q7/Q9 series.
Image showing the Q7F Bracket, an optional accessory for mounting various flashes.
Figure 7: Optional Q7F Bracket for flash mounting.

5. Operation

Using the Softbox:

Once assembled and mounted to your light source, the softbox is ready for use. The double-layer diffuser and optional grid allow for versatile light shaping. Adjust the position and angle of the softbox to achieve your desired lighting effect.

After Use:

Turn off the device and store it in a dry place. Keep away from children.

6. Maintenance & Storage

Cleaning:

Turn off the device before cleaning. Use a soft, lint-free cloth to wipe down the surfaces. Do not use abrasive cleaners or solvents.

Storage:

Store the softbox in a dry place at room temperature (15°C - 35°C). For long-term storage, if the softbox has any electronic components (like a built-in light), ensure to charge it to 50% every 3 months to maintain battery health. The quick-release design allows for compact folding for storage.

Diagram showing three steps to fold and store the softbox: finding the mount lock, holding the upper mount and pulling the lock outward, and completing the fold.
Figure 8: Softbox Storage Steps.
Image showing the Q3-40 softbox folded for storage, with its net weight and folding size.
Figure 9: Q3-40 folded dimensions and weight.
Image showing the Q7-55 softbox folded for storage, with its net weight and folding size.
Figure 10: Q7-55 folded dimensions and weight.
Image showing the Q9-60 softbox folded for storage, with its net weight and folding size.
Figure 11: Q9-60 folded dimensions and weight.

7. Troubleshooting & Stop-Use Conditions

If the product does not function as expected, stop using it and check the following:

  • Correct installation or setup of the softbox and its components.
  • Power supply or battery status of the connected light source (if applicable).
  • Compatibility of accessories, ensuring all components are correctly matched.

8. Technical Specifications

FeatureDetails
Brand NameAMBITFUL
Model SeriesQ3 / Q7 / Q9
ShapeOctagon (Q3, Q7, Q9), Square (Q7-6090, Q7-30120)
Mount TypeQ3: Godox Mount (SA-GD Speed Ring)
Q7/Q9: Bowens Mount
MaterialLychee Texture (Reflective Fabric)
CertificationsCE
Input VoltageN/A (Passive accessory)
Rated PowerN/A (Passive accessory)
Battery CapacityN/A (Passive accessory)

Model Specific Dimensions and Weights:

ModelDiameterDepthFolding SizeNet Weight
Q3-4040cm25cm~38cm~0.27kg
Q3-6060cm29cm~47cm~0.35kg
Q7-5555cm31cm~51cm~0.73kg
Q7-6565cm33cm~55cm~0.80kg
Q7-9090cm38cm~68cm~0.99kg
Q7-609060x90cm42.5cm~78cm~0.94kg
Q7-3012030x120cm40.5cm~80cm~0.96kg
Q9-6060cm28.5cm~53cm~0.778kg
Q9-9090cm56.5cm~87cm~1.319kg
Q9-120120cm68cm~108cm~1.903kg

Note: The above data is provided by Ambitful Laboratories for reference purposes only. Product size is measured by hand, there may be 1-2cm error.

Table of specifications for Q3-40 and Q3-60 models including diameter, depth, storage size, and net weight.
Figure 12: Q3 Series Specifications.
Table of specifications for Q7-55, Q7-65, Q7-90, Q7-6090, and Q7-30120 models including diameter, depth, folding size, and net weight.
Figure 13: Q7 Series Specifications.
Table of specifications for Q9-60, Q9-90, and Q9-120 models including diameter, depth, storage size, and weight.
Figure 14: Q9 Series Specifications.

9. User Tips

  • For softer, more diffused light, ensure both the inner and front diffusers are installed.
  • To achieve more directional light and prevent spill, attach the honeycomb grid.
  • When folding the softbox, ensure all rods are properly disengaged from the locking mechanism to prevent damage.
  • Consider purchasing the appropriate speed ring adapter (e.g., Bowens to Godox) if you plan to use the softbox with different brand lights.

10. Disposal & Recycling

  • Do not dispose of the product with general household waste.
  • Follow local environmental and waste disposal regulations for proper recycling of electronic and photographic equipment.

11. Manufacturer & EU Representative Information

Manufacturer:

Shenzhen New Vision Photography Equipment Co., Ltd
No.5, Guansheng 2nd Road, Luhu Community, Guanhu Street 18F, Block A, Jieshun Technology Center
Shenzhen, Guangdong 518000 CHINA

EU Authorized Representative:

E-CrossStu GmbH
69 Mainzer Landstrasse, Frankfurt am Main, Hessen
Email: E-CrossStu@web.de

Importer:

Shenzhen New Vision Photography Equipment Co., Ltd

12. Compliance Information

This product complies with all applicable safety and regulatory requirements in the market where it is sold, relating to electrical safety, electromagnetic compatibility, and environmental compliance. Conformity marking (e.g., CE) and related documentation may be required.

For further details, please refer to the official user manual PDF: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.