UGREEN HiTune Max6

Contents

UGREEN HiTune Max6 Wireless Active Noise Cancelling Headphones

Model: HiTune Max6 (HP206)

Brand: UGREEN

1. Introduction

Thank you for choosing the UGREEN HiTune Max6 Wireless Active Noise Cancelling Headphones. These headphones are designed to provide a superior audio experience with advanced features such as Hybrid Active Noise Cancellation, Hi-Res Audio support with LDAC decoding, and an ultra-long battery life. This manual will guide you through the setup, operation, and maintenance of your new headphones.

UGREEN HiTune Max6 Wireless Active Noise Cancelling Headphones
Figure 1: UGREEN HiTune Max6 Wireless Active Noise Cancelling Headphones

2. Package Contents

Please check the package for the following items:

  • UGREEN HiTune Max6 Wireless Headphones
  • Type-C Charging Cable
  • User Manual
  • (Other accessories not specified, may vary)

3. Product Overview

The UGREEN HiTune Max6 headphones feature an ergonomic over-ear design with controls typically located on the earcups for easy access to power, volume, and ANC functions. The charging port is a Type-C interface.

Side view of UGREEN HiTune Max6 headphones showing controls
Figure 2: Side view of headphones, illustrating general design and control placement.

For specific button functions, refer to the "Operating Instructions" section.

4. Specifications

Feature Detail
BrandUGREEN
Model NameHiTune Max6 (HP206)
ColorBlack/White
Form FactorOver Ear
Connectivity TechnologyWireless (Bluetooth 6.0)
Bluetooth DistanceUp to 10m
Charging PortType-C
Battery Capacity820mAh
Charging TimeApprox. 1.5 hours
Audio CodecsAAC/SBC/LDAC
Noise CancellationHybrid ANC (up to -48dB), AI Wind Noise Reduction
Drivers40mm Woofer, 12mm Tweeter
Microphones5 built-in microphones
Battery Life (ANC Off)Up to 120 hours
Battery Life (ANC On)Up to 80 hours
Fast Charging10 minutes charge for 5 hours playback
Low Latency0.06s (Gaming Mode)
CertificationCE
Waterproof StandardIPX-0
MaterialPlastic
Headphone comparison table showing specifications for HiTune Max6 and other models
Figure 3: Specification comparison for UGREEN headphones, highlighting HiTune Max6 features.

5. Setup

5.1 Charging the Headphones

Before first use, fully charge your headphones. Connect the provided Type-C charging cable to the charging port on the headphones and to a USB power source. The LED indicator will show charging status and turn off or change color when fully charged. A full charge takes approximately 1.5 hours.

Headphones with '120H' indicating battery life and fast charging details
Figure 4: Battery life and fast charging capabilities.

5.2 Bluetooth Pairing

  1. Ensure the headphones are charged and powered off.
  2. Press and hold the Power button (usually located on one of the earcups) until the LED indicator flashes, indicating pairing mode.
  3. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
  4. Select "UGREEN HiTune Max6" from the list of found devices.
  5. Once connected, the LED indicator will stop flashing or show a solid light, and you will hear an audible confirmation.

If pairing fails, turn off the headphones and your device's Bluetooth, then repeat the steps.

6. Operating Instructions

6.1 Power On/Off

  • Power On: Press and hold the Power button for a few seconds.
  • Power Off: Press and hold the Power button for a few seconds.

6.2 Audio Playback

Use the controls on the earcup to manage your audio:

  • Play/Pause: Single press the Multi-function button (often the Power button or a dedicated button).
  • Volume Up/Down: Press the Volume Up (+) or Volume Down (-) buttons.
  • Next Track: Double press the Multi-function button.
  • Previous Track: Triple press the Multi-function button.

6.3 Active Noise Cancellation (ANC)

The HiTune Max6 features Hybrid Active Noise Cancellation, reducing ambient noise by up to 48dB. It also includes AI Wind Noise Reduction.

  • Toggle ANC: Press the dedicated ANC button (if available) or a specific combination on the Multi-function button to cycle through ANC modes (e.g., ANC On, Ambient Sound, ANC Off).
Diagram showing Hybrid Active Noise Cancellation reducing sound by -48dB
Figure 5: Hybrid Active Noise Cancellation capability.
Person running outdoors with headphones, illustrating AI Wind Noise Reduction
Figure 6: AI Wind Noise Reduction in action.

6.4 Phone Calls

The 5-microphone system ensures crystal-clear calls.

  • Answer/End Call: Single press the Multi-function button.
  • Reject Call: Press and hold the Multi-function button for 2 seconds.
Person talking on a phone call while wearing UGREEN HiTune Max6 headphones, indicating clear call quality
Figure 7: Crystal-Clear Call functionality.

6.5 Gaming Mode (Ultra Low Latency)

Switch to gaming mode for an ultra-low latency of 0.06s, providing a better gaming experience.

  • Activate Gaming Mode: Refer to your device's specific instructions or the headphone's dedicated button for gaming mode activation.
Person playing a video game with a controller while wearing UGREEN HiTune Max6 headphones, highlighting low latency
Figure 8: Ultra-low latency for gaming.

6.6 Hi-Res Audio and Spatial Sound

The headphones support Hi-Res Audio with LDAC decoding and feature a Quad-Speaker Enhanced Engine (40mm woofer, 12mm tweeter) for detailed sound. Spatial audio is also supported for an immersive listening experience.

Diagram illustrating Hi-Res Audio and LDAC Audio Decoding technology
Figure 9: Hi-Res Audio and LDAC Audio Decoding.
Diagram showing the Quad-Speaker Enhanced Engine with 40mm woofer and 12mm tweeter
Figure 10: Quad-Speaker Enhanced Engine with 40mm woofer and 12mm tweeter.
Person in a large hall wearing headphones, with sound waves indicating Spatial Audio support
Figure 11: Spatial Audio Supported.

7. Maintenance

  • Keep the headphones dry. Do not expose them to extreme temperatures or humidity.
  • Clean the earcups and headband with a soft, dry cloth.
  • Avoid using harsh chemicals or abrasive materials for cleaning.
  • Store the headphones in a protective case when not in use to prevent damage.

8. Troubleshooting

Headphones do not power on:
Ensure the headphones are fully charged. Connect them to a power source using the Type-C cable.
Cannot pair with device:
  • Make sure the headphones are in pairing mode (LED flashing).
  • Ensure Bluetooth is enabled on your device and it is within 10 meters of the headphones.
  • Try turning off and on both the headphones and your device's Bluetooth.
  • Clear previous Bluetooth connections on your device if necessary.
No sound or poor sound quality:
  • Check the volume levels on both the headphones and your connected device.
  • Ensure the headphones are properly connected via Bluetooth.
  • Try re-pairing the headphones with your device.
  • Ensure there are no obstructions between the headphones and your device.
ANC not working effectively:
  • Ensure ANC is activated.
  • Adjust the fit of the headphones to ensure a good seal around your ears.

9. User Tips

  • For optimal sound quality, ensure the earcups form a good seal around your ears.
  • To maximize battery life, turn off ANC when not needed.
  • Utilize the fast charging feature for quick power boosts when you're short on time.
  • Experiment with different ANC modes to find the best setting for your environment.

10. Warranty and Support

10.1 After-sale Service

UGREEN offers excellent after-sales services. Any issues you report will receive a response within 24 hours and exact action within 48 hours.

10.2 Warranty Policy

The warranty covers manufacturing defects under normal use. It excludes:

  • Damage caused by human factors.
  • Damage resulting from improper operation.
  • Products that cannot be resold.

Please check the quality of the products before using them and inform UGREEN if any defects are found. Excluding the factors above, UGREEN will replace products within the guarantee period.

For support or warranty claims, please contact UGREEN customer service through their official channels.

11. Safety Information

  • Do not disassemble, repair, or modify the product.
  • Do not expose the product to fire or high temperatures.
  • Keep the product away from water and other liquids.
  • Avoid prolonged listening at high volumes to prevent hearing damage.
  • Do not use the headphones in situations where inability to hear ambient sounds could be dangerous (e.g., driving, cycling, walking in traffic).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.