1. Product Overview
The DATA FROG S80 Wireless Pro Controller is a versatile gamepad designed for an enhanced gaming experience across multiple platforms. It features a 6-axis gyro sensor, dual vibration motors, programmable back buttons, and customizable RGB LED lighting.
Package Contents
- 1 x Game Controller
- 1 x Charging Cable (supports data import)
- 1 x User Manual

Figure 1: S80 Wireless Pro Controller Package Contents
Controller Layout

Figure 2: Front View of S80 Controller

Figure 3: Back View of S80 Controller
| Button | Function |
|---|---|
| Vibration Button | Adjust vibration intensity. |
| Turbo Button | Activates/deactivates turbo function. |
| LED Indicator | Shows connection status, charging status, and turbo speed. |
| Left Stick / L3 Button | Movement control, L3 press function. |
| Right Stick / R3 Button | Camera/aim control, R3 press function. |
| L / ZL Buttons | Left shoulder and trigger buttons. |
| R / ZR Buttons | Right shoulder and trigger buttons. |
| M1 / M2 Buttons | Programmable back buttons. |
| Reset Button | Resets the controller. |
| Y / X / A / B Buttons | Standard action buttons. |
| - / + Buttons | Select / Start buttons. |
| D-pad Button | Directional pad. |
| Capture Button | Takes screenshots. |
| Home Button | Returns to home screen, power on/off. |
| Light Button | Controls LED lighting effects. |
| SYNC Button | Initiates pairing mode. |
2. Setup and Connection
Ensure the controller is charged before initial use. Refer to the 'Charging' section for details.
Connecting to Nintendo Switch (NS)
- Warning: Disable Airplane Mode on your Switch. Do not touch the joystick during connection.
- Access the Switch's connection interface (Controllers > Change Grip/Order).
- Press and hold the SYNC button on the back of the controller for approximately 2 seconds until the signal lights flash from left to right. Release the button and wait for a successful connection.
Quick Reconnection:
- After the first successful pairing, simply press the HOME button to wake up the controller and re-link it to the console.
Video 1: Connecting S80 Controller to Nintendo Switch
Connecting to Android Devices
- Enable Bluetooth on your Android device and search for available devices.
- Press and hold the A button and the HOME button on the controller simultaneously until LED1 and LED2 start flashing. Then release the buttons.
- On your Android device, find the Bluetooth name "Gamepad" and tap to pair. Upon successful pairing, LED1 and LED2 will remain steadily lit.
Note:
- Supports HID mode games on Android.
- Vibration, screenshot, and motion control functions are not available on Android.
Video 2: Connecting S80 Controller to Android Device
Connecting to iOS Devices
- Enable Bluetooth on your iOS device and search for available devices.
- Press and hold the B button and the HOME button on the controller simultaneously until LED2 and LED3 start flashing. Then release the buttons.
- On your iOS device, find the Bluetooth name "Xbox Wireless Controller" and tap to pair. Upon successful pairing, LED2 and LED3 will remain steadily lit.
Note:
- Supports MFI games on iOS.
- Requires iOS 13.0 or later.
- Vibration, screenshot, and motion control functions are not available on iOS.
Connecting to Windows PC
Wired Connection:
- Connect the controller to your PC using the included USB cable. LED1 and LED4 will light up upon connection.
Wireless Connection (with receiver, if applicable):
- Plug the receiver into a USB port on your PC.
- Press and hold the X button and the HOME button on the controller simultaneously until LED2 and LED3 start flashing. Then release the buttons.
- Wait for a successful connection (LED2 and LED3 will remain steadily lit).
Note:
- Supports X-INPUT mode games on Windows and platforms like Steam.
- Requires Windows 7 or later.
- Screenshot and motion control functions are not available on PC.
Video 3: Connecting S80 Controller to PC
Connecting to R36S (via OTG)
- Connect the R36S console and the S80 controller via an OTG cable.
- On the R36S (using a PSP emulator as an example), navigate to: Right Stick → Setting → Controls → Controls mapping.
- Set the button mappings in sequence according to your preference.
Video 4: Connecting S80 Controller to R36S
3. Operating Instructions
Special Tips
- In connection modes for Nintendo Switch, Android, and iOS, you can press the HOME button to quickly reconnect to the last connected device.
- On Android, iOS, and Windows PC:
- Long press Capture + L3 for 1 second: The controller will vibrate once to cycle between the functions of the left joystick and the D-pad.
- Long press Capture + R3 for 1 second: The controller will vibrate once to cycle between the functions of the A/B and X/Y buttons.
Turbo Function
Applicable Buttons: A, B, X, Y, L, ZL, R, ZR
- Manual Turbo: Hold the Turbo button, then press a functional button (e.g., A) to activate manual turbo for that button.
- Automatic Turbo: Hold the Turbo button, then press a functional button that already has manual turbo configured (e.g., A) to switch to automatic turbo.
- Disable Turbo: Hold the Turbo button, then press a functional button that has automatic turbo configured (e.g., A) to deactivate its turbo function.
- Disable All Turbos: Press the - button and D-pad DOWN simultaneously. The controller will vibrate once to confirm.
Turbo Speed Levels:
- Slow: 5 pulses/second (slow flashing of the signal light).
- Medium: 12 pulses/second (medium flashing of the signal light).
- Fast: 20 pulses/second (fast flashing of the signal light).
Adjusting Turbo Speed:
- Increase Speed: Press Turbo + D-pad UP simultaneously.
- Decrease Speed: Press Turbo + D-pad DOWN simultaneously.

Figure 4: Turbo Function Settings
Vibration Function
The controller features dual motors providing four adjustable vibration intensity levels: None, Weak, Medium, Strong.
- Adjusting Vibration: Ensure the controller is connected to the console. Press the Vibration button on the back of the controller to cycle through the intensity levels.

Figure 5: Vibration Modes and 6-Axis Gyro Sensor
Programmable Buttons (M1/M2)
The S80 controller allows you to assign functions to the programmable back buttons (M1/M2) for optimized gameplay. Programmable buttons include: A, B, X, Y, L, ZL, R, ZR, L3, R3, D-pad.

Figure 6: Programmable Back Buttons
Single Button Programming:
- With the controller powered on, press the - button and either M1 or M2 simultaneously for 2 seconds. The controller will vibrate, and the joystick ring light will turn white and flash.
- Press the functional button you wish to assign (e.g., A).
- Press M1 or M2 again to save the setting. The controller will vibrate, and the joystick ring light will return to its normal state.
Multiple Button Programming (Macro):
- With the controller powered on, press the + button and either M1 or M2 simultaneously for 2 seconds. The controller will vibrate, and the joystick ring light will turn white and flash.
- Press multiple buttons sequentially (the controller records the timing between button presses).
- Press M1 or M2 again to save the macro. The controller will vibrate, and the joystick ring light will return to its normal state.
Clearing Programming:
- Single Button Macro: Press the + button and either M1 or M2 for 2 seconds until the joystick ring light flashes, then press M1 or M2 again to clear that specific macro.
- All Macros: Press the T button and the - button simultaneously. The controller will vibrate to confirm all macros are cleared.
Light Effects Control (9-Color RGB LEDs)
The controller features customizable RGB LED lighting around the joysticks and on the panel.

Figure 7: RGB LED Lighting Modes
- Press the Light button to cycle through fixed colors.
- Press Light + + button to switch between breathing mode and constant light mode.
- Press Light + L3 button to turn the joystick ring light effect on/off.
- Press Light + R3 button to turn the panel light effect on/off (not applicable to the matte black version).
- Press Light + move Left Joystick Up/Down to adjust the brightness of the lights.
Wake-Up Function
The controller supports waking up the Nintendo Switch console from sleep mode.
- After a successful initial connection, you can press the HOME button to wake up the console. The LED will flash slowly in a marquee pattern and automatically reconnect.

Figure 8: Wake-Up Function Steps
4. Maintenance
Charging
Use the included charging cable to charge the controller.
- When connected: The LED indicator will flash slowly during charging and remain steadily lit when fully charged.
- When powered off: The LED indicator will flash slowly during charging and turn off when fully charged.
Battery Life:
- Battery Capacity: 800mAh
- Charge Time: 2-3 hours
- Play Time: 15-18 hours
5. Troubleshooting
Connection Issues (Nintendo Switch)
- Ensure Airplane Mode is disabled on your Nintendo Switch.
- Delete existing controller pairing information on your Switch: Go to System Settings → Controllers and Sensors → Disconnect Controllers. Then attempt to re-pair following the initial connection steps.
Manual Gyroscope Calibration (Joystick Drift)
If you experience joystick drift in games:
- Place the powered-off controller on a horizontal surface.
- Press the HOME button and the - button simultaneously until LED1-LED4 flash alternately three times.
- Press the + button to complete the calibration. The signal lights will turn off.
PC Compatibility Issues
While the controller supports Windows 7 and higher, some users have reported difficulties getting the controller to respond in certain games on Windows 11 via Bluetooth. Ensure your PC's Bluetooth drivers are up to date and that the game supports X-INPUT controllers. If issues persist, a wired connection might offer more stable compatibility for some PC setups.
6. Specifications
| Feature | Detail |
|---|---|
| Brand Name | DATA FROG |
| Model | S80 |
| Type | Gamepads |
| Compatible Brand/Model | Nintendo |
| Compatible Nintendo Model | Nintendo Switch, Nintendo Switch OLED, Nintendo Switch Lite |
| Connectivity | Wireless (Bluetooth), Wired (USB) |
| Battery Included | Yes |
| Battery Capacity | 800mAh |
| Charge Time | 2-3 hours |
| Play Time | 15-18 hours |
| Trigger Button Type | Non-Linear |
| Motion Sensing | 6-Axis Gyro Sensor |
| Vibration | Dual Vibration (4 adjustable modes) |
| LEDs | 9-Color RGB LEDs (Strobe, Breathing, Static modes) |
| Programmable Buttons | M1, M2 (Single or Multi-button macros) |
| Turbo Function | Manual & Automatic (3 adjustable speeds) |
| Wake-Up Function | Yes (for Nintendo Switch) |
| NFC for Amiibo | No |
| Package Dimensions (L x W x H) | 17cm x 13cm x 7cm |
| Package Weight | 0.314 kg |
7. User Tips
- General Compatibility: The controller is widely compatible with Nintendo Switch (including OLED and Lite), PC (Windows 7 and higher), Android, and iOS (13.0+).
- PC Gaming: For PC gaming, ensure your games support X-INPUT mode for optimal performance. If experiencing issues on newer Windows versions, try a wired connection.
- NFC Functionality: Please note that this controller does not support NFC for Amiibo.
- Wake-Up Feature: The controller can wake up your Nintendo Switch console from sleep mode by pressing the HOME button after initial pairing.
- Programmable Buttons: Utilize the M1/M2 back buttons to create custom macros or reassign functions, which can significantly enhance gameplay and reduce finger strain during complex actions.
8. Warranty and Support
For any assistance, technical support, or warranty inquiries, please contact us directly at:
Email: support@datafrogx.com