ANDELI CT-418, CT-520

Contents

ANDELI CT-418 CT-520 Multifunctional Welding Machine User Manual

Your comprehensive guide to operating and maintaining your ANDELI CT-418 or CT-520 welding and cutting machine.

1. Product Overview

The ANDELI CT-418 and CT-520 are advanced multifunctional welding machines designed for a wide range of applications. These 220V units integrate cutting, MIG welding, Stick welding (MMA), and TIG welding capabilities, along with gas-shielded plasma cutting. Featuring an LED large LCD screen for easy operation, these machines are suitable for both professional and demanding DIY tasks.

The CT-418 model is optimized for general-purpose welding and cutting, while the CT-520 offers enhanced features for more specialized tasks, including pulse aluminum welding.

ANDELI CT-418 Multifunctional Welding Machine with control panel and accessories
Figure 1: ANDELI CT-418 Multifunctional Welding Machine (Red variant) showing its control panel and various accessories.
ANDELI CT-520 Multifunctional Welding Machine with a user
Figure 2: ANDELI CT-520 Multifunctional Welding Machine (White variant) highlighting its features and accessories.

2. Safety Instructions

Always prioritize safety when operating welding and cutting equipment. Failure to follow safety precautions can result in serious injury or death.

  • Wear appropriate personal protective equipment (PPE), including welding helmet, gloves, protective clothing, and safety shoes.
  • Ensure adequate ventilation to avoid inhaling fumes.
  • Keep a fire extinguisher nearby.
  • Do not operate in wet conditions or near flammable materials.
  • Ensure the machine is properly grounded.
  • Disconnect power before performing any maintenance or changing accessories.
  • Read and understand all instructions before use.

3. Setup and Connections

Before operating the machine, ensure all connections are secure and correct.

3.1 Power Connection

  • The machine operates on a 220V power supply. Ensure your power source matches this requirement.
  • Connect the power cable securely to the machine and a suitable grounded outlet.

3.2 Gas Connections (for MIG, TIG, and Plasma Cutting)

  • Connect the appropriate gas cylinder (e.g., Argon for TIG, CO2 for MIG, compressed air for plasma cutting) to the gas inlet on the machine using the provided 5M Argon Hose or similar.
  • Use the Carbon Dioxide Gas Regulator to control gas flow for MIG welding.
  • Ensure all gas connections are tight to prevent leaks.

3.3 Torch and Ground Clamp Connections

  • MIG Welding: Connect the MIG torch (e.g., 3M 24KD TIG Torch, which can be adapted for MIG) and the ground clamp to their respective terminals.
  • TIG Welding: Connect the TIG torch and the ground clamp.
  • Stick Welding (MMA): Connect the electrode holder and the ground clamp.
  • Plasma Cutting: Connect the PT-31 Plasma Cutting Torch (4M) and the ground clamp.
  • Ensure all connections are firm and free from damage.
Rear view of the welding machine showing power and gas connections
Figure 3: Rear view of the welding machine, illustrating the power input and gas connections.

3.4 Consumables Installation

  • MIG Welding: Install the appropriate welding wire (e.g., 1KG Carbon Dioxide Wire, 1KG Aluminum Alloy Wire) into the wire feeder. Ensure the wire size matches the drive roller and nozzle.
  • Stick Welding: Insert a Long 3.2 Electrode into the electrode holder.
  • Plasma Cutting: Ensure the PT-31 Plasma Cutting Torch has a new Nozzle and Electrode installed.
  • Use the provided Ceramic Nozzle and Torch Head as needed.

4. Operating Instructions

The machine features an intelligent operating panel with an LED large LCD screen for easy mode selection and parameter adjustment.

4.1 Control Panel Overview

The control panel (refer to Figure 1) allows you to select the welding/cutting mode and adjust parameters such as current, voltage, and wire feed speed. The LED display provides clear feedback on selected settings.

4.2 Mode Selection

Use the mode selection buttons on the control panel to choose between:

  • CUT (Plasma Cutting): For cutting various metals.
  • MIG (Gas Shielded Welding): For welding with gas protection.
  • MMA (Stick Welding): For welding with coated electrodes.
  • TIG (Argon Arc Welding): For precise welding with argon gas.

4.3 Parameter Adjustment

Once a mode is selected, use the adjustment knobs to set the desired parameters:

  • Current (Amperage): Controls the heat input.
  • Voltage: Affects arc length and bead profile (primarily for MIG).
  • Wire Feed Speed: Controls the rate at which welding wire is fed (for MIG).
  • Gas Flow: Adjust for optimal shielding (for MIG, TIG, Plasma).

4.4 Welding and Cutting Applications

Welding machine in action with various torches
Figure 4: The multifunctional welding machine in operation, demonstrating its versatility with different torches.
  • Intelligent Gas Protection (MIG): Ideal for welding stainless steel, galvanized steel, and round pipes.
  • Low-Frequency Cutting (Plasma): Suitable for cutting thick steel plates and various metal materials.
  • Pulse Argon Arc (TIG): Excellent for welding stainless steel doors and windows, stair railings, and anti-theft windows.
  • Strong Electric Welding (MMA): Effective for welding non-magnetic materials, galvanized steel, and round pipes.
Diagram showing different welding processes
Figure 5: Visual representation of the machine's diverse welding capabilities, including intelligent gas protection, low-frequency cutting, pulse argon arc, and strong electric welding.

4.5 Cutting Examples

The plasma cutting function can be used for:

  • Rebar cutting
  • Pipe cutting
  • Scrap metal cutting
  • I-beam cutting
  • Irregular shape cutting
  • Stainless steel cutting
Examples of plasma cutting applications
Figure 6: Examples of various cutting applications possible with the plasma cutting function, such as rebar, pipe, and stainless steel.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Periodically clean the machine's exterior and ventilation openings to prevent dust buildup. Use compressed air to clear internal components if necessary (ensure power is disconnected).
  • Consumables: Regularly inspect and replace worn-out consumables such as MIG nozzles, contact tips, TIG collets, electrodes, and plasma cutting nozzles and electrodes.
  • Cables and Connections: Check all cables for cuts, abrasions, or loose connections. Ensure ground clamp and torch connections are secure.
  • Gas Lines: Inspect gas lines for kinks or leaks.
  • Wire Feeder (MIG): Clean the wire feeder mechanism and ensure the drive rollers are free of debris.

6. Troubleshooting

This section addresses common issues you might encounter. For more complex problems, contact customer support.

ProblemPossible CauseSolution
Machine does not power onNo power supply; loose power cable; faulty switchCheck power outlet and cable; ensure switch is ON; contact support if issue persists.
Poor arc starting/unstable arcIncorrect settings; dirty workpiece; worn consumables; poor ground connectionAdjust current/voltage; clean workpiece; replace consumables; check ground clamp connection.
No wire feed (MIG)Wire tangled; clogged liner; incorrect drive roller tension; motor issueCheck wire spool; clean/replace liner; adjust drive roller tension; contact support.
No gas flowEmpty gas cylinder; closed valve; kinked hose; faulty solenoidCheck gas cylinder level and open valve; inspect hose; contact support.
Plasma cutter not cuttingWorn consumables; insufficient air pressure; incorrect settingsReplace nozzle/electrode; check air supply and pressure; adjust cutting current.

7. Specifications

FeatureCT-418 SpecificationCT-520 Specification
Input Voltage220V
FunctionsCutting, MIG Welding, Stick Welding (MMA), TIG Welding
Applicable Welding Wires0.8/1.0 Flux-cored Wire, 0.8/1.0 Solid Wire
Cutting Thickness (Contact)≤15MM≤12MM (Extreme Cutting)
TIG Welding Thickness0.8-8MM
Electrode SpecificationLong 3.2 Electrodes
Welding Wire Capacity5KG
WeightApprox. 12.3KGApprox. 13.7KG
Dimensions (L*W*H)Approx. 484*212*315MMApprox. 482*207*275MM
MaterialPlastic
FeatureMultiple Uses
FunctionReusable
OriginMainland China (Guangdong)

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.