1. Product Overview
The DNXT M27 is a versatile 4G portable LTE WiFi router that also functions as an 8000mAh power bank. Designed for mobility, it provides continuous 4G network access and supports dual-band WiFi (2.4G & 5.8G) with WiFi 6 capabilities, allowing up to 10-20 users to connect simultaneously.


2. Package Contents
Please check the package for the following items:
- DNXT M27 4G Portable LTE WIFI Router
- USB Cable (for charging and direct connection)
- User Manual (this document)
3. Device Layout and Interfaces
Familiarize yourself with the ports and buttons on your DNXT M27 router:

- USB + Type-C Port: Used for charging the device and for direct internet connection to a computer.
- SIM Slot: Insert your 4G LTE SIM card here to enable mobile data.
- Reset Button: A small button, usually recessed, used to restore the device to factory settings.
- Power Button: Used to turn the device on/off and check battery status.
4. Setup Guide
- Insert SIM Card: Locate the SIM slot on the device. Carefully insert your active 4G LTE SIM card into the slot until it clicks into place. Ensure the SIM card is correctly oriented.
- Charge the Device: Connect the DNXT M27 to a power source using the provided USB or Type-C cable. The device has an 8000mAh built-in battery.
- Power On: Press and hold the Power button for a few seconds until the indicator lights illuminate. The device will begin to search for a 4G network.
- Connect to WiFi:
- On your computer, smartphone, or tablet, search for available Wi-Fi networks.
- Select the network name (SSID) broadcasted by your DNXT M27 (usually printed on a label on the device or packaging).
- Enter the Wi-Fi password (Key) when prompted.
- Direct USB Connection (Optional): For desktop computers or laptops without Wi-Fi, you can connect the DNXT M27 directly via a USB cable. Once connected, the computer should recognize it as a network adapter and provide internet access. No additional Wi-Fi receiver is required.

5. Operating Instructions
5.1 Power On/Off
- To Power On: Press and hold the Power button for approximately 3 seconds.
- To Power Off: Press and hold the Power button for approximately 3 seconds until the indicator lights turn off.
5.2 Checking Battery Status
Briefly press the Power button to see the battery indicator lights. The number of lit LEDs indicates the remaining battery charge.
5.3 Using as a Power Bank
Connect your mobile device (e.g., smartphone, tablet) to the USB or Type-C port of the DNXT M27 using an appropriate charging cable. The 8000mAh battery will provide power to your device.
5.4 Network Connection and Usage
Once powered on and connected to a 4G network, the DNXT M27 will broadcast a dual-band Wi-Fi signal (2.4GHz and 5.8GHz). You can connect up to 10-20 devices simultaneously. The device supports high-speed internet access for various activities like streaming, gaming, and online learning.


6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Avoid liquid cleaners or abrasive materials.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the device frequently. Charge it regularly, even if not in use for extended periods.
- Firmware Updates: Check the manufacturer's website periodically for any available firmware updates to ensure optimal performance and security.
7. Troubleshooting
- No Internet Connection:
- Ensure your SIM card is correctly inserted and active with a data plan.
- Check the signal strength indicators on the device. If signal is weak, try moving to a different location.
- Restart the device by turning it off and then on again.
- Verify that your connected device (phone, laptop) has Wi-Fi enabled and is connected to the correct SSID.
- Slow Internet Speed:
- Check your 4G signal strength.
- Reduce the number of connected devices.
- Ensure there are no obstructions between the router and your connected devices.
- Try restarting the device.
- Cannot Connect to Wi-Fi:
- Double-check the Wi-Fi password.
- Ensure the device is powered on and broadcasting a signal.
- Try resetting the router to factory settings using the recessed Reset button (this will erase all custom settings, including Wi-Fi password).
- Power Bank Function Not Working:
- Ensure the DNXT M27 has sufficient battery charge.
- Check the charging cable and the device you are trying to charge.
8. Specifications
| Feature | Description |
|---|---|
| Brand Name | Dnxt |
| Model Number | M27 |
| Network Type | 4G LTE |
| Transmission Rate | 150Mbps |
| Wi-Fi Standard | Supports WiFi 6 |
| Wi-Fi Frequency | Dual-band (2.4G & 5.8G) |
| Max. Users Supported | 10-20 users |
| Battery Capacity | 8000mAh (Built-in) |
| Interface Type | USB, Type-C, SIM Slot |
| Card Type Device | Double Card |
| Application | Desktop, Laptop, Mobile Devices |
| Certifications | CE, FCC, RoHS |
| Origin | Mainland China |
| Package Dimensions | 17cm (L) x 12cm (W) x 6cm (H) |
| Package Weight | 0.4 kg |
9. User Tips
- Plug and Play Convenience: The M27 is designed for ease of use. Simply insert your SIM card, power it on, and connect your devices.
- Direct PC Connection: For stable internet on a desktop or laptop, utilize the USB direct connection feature. No additional drivers or Wi-Fi adapters are typically needed.
- Secure Your Network: Regularly change your Wi-Fi password to prevent unauthorized access. The device allows you to manage your own Wi-Fi settings.
- Optimal Placement: For the best signal strength, place the router in an open area, away from large metal objects or other electronic devices that might cause interference.
- Multi-User Support: With support for up to 20 users, it's ideal for small groups, family use, or small office environments.

10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the manufacturer or your point of purchase. Keep your proof of purchase for any warranty claims.