DOOGEE BoneBeat Swim Bone Conduction Headphones

1. Introduction

The DOOGEE BoneBeat Swim headphones are designed for active users, featuring bone conduction technology, IP68 waterproofing, and dual Bluetooth and MP3 modes. This manual provides essential information for setting up, operating, and maintaining your headphones to ensure optimal performance and longevity.

Image: DOOGEE BoneBeat Swim headphones in three colors (Flame Red, Obsidian Black, Storm Gray) submerged in water, highlighting their waterproof design.

2. Package Contents

Please check the box for the following items:

Image: A flat lay of all items included in the DOOGEE BoneBeat Swim package.

• 1 X BoneBeat Swim Headphones
• 1 X Silicone Swimming Earplugs
• 1 X Sponge Swimming Earplugs
• 1 X Elastic Strap
• 1 X Storage Case
• 1 X Magnetic Charging Cable
• 1 X Packing Box
• 1 X Manual
• 1 X Service Card

3. Setup and Charging

3.1 Wearing the Headphones

The BoneBeat Swim headphones feature a back-hanging design with silicone ear hooks and a memory wire for a secure and comfortable fit. Place the headphones around the back of your head, ensuring the bone conduction transducers rest comfortably in front of your ears. The ergonomic design and anti-slip structure ensure a stable fit during intense activities.

Image: A swimmer wearing the BoneBeat Swim headphones, demonstrating the secure, open-ear fit.

For smaller head sizes, an elastic strap is included to provide an adjustable and tailored fit, preventing slipping during movement.

Image: Diagram illustrating the adjustable elastic strap for a tailored fit.

3.2 Charging the Headphones

Before first use, fully charge your headphones. Use the provided magnetic charging cable. Connect the 4-pin magnetic end to the charging port on the headphones and the USB end to a 5V power source.

• Charging Port: 4-pin magnetic (2-pin for charging, 2-pin for data transmission).
• Power Input: 5V/140mAh.
• Charging Time: Approximately 2 hours for a full charge.
• Fast Charging: 10 minutes of charging provides approximately 2 hours of music playback.

Image: Diagram showing battery life (7 hours Bluetooth, 4 hours MP3) and fast charging capability.

4. Operating Instructions

4.1 Power On/Off

• Power On: Press and hold the MFB (Multi-Function Button) until the indicator light turns on.
• Power Off: Press and hold the MFB until the indicator light turns off.

4.2 Controls

The headphones are equipped with physical buttons for easy control:

Image: Close-up view of the physical control buttons: Volume -, MFB Button, and Volume +.

• MFB Button: Multi-Function Button for power, play/pause, answer/end calls.
• Volume + Button: Increase volume, next track (long press).
• Volume - Button: Decrease volume, previous track (long press).

4.3 Dual Modes: Bluetooth & MP3

The BoneBeat Swim headphones support both Bluetooth and MP3 modes, allowing for versatile use.

Image: Visual representation of Bluetooth and MP3 modes, showing a swimmer and a cyclist using the headphones.

• Bluetooth Mode: Connect wirelessly to your smartphone or other Bluetooth-enabled devices. Ideal for everyday use, calls, and streaming music.
• MP3 Mode: Utilize the built-in 32GB memory (expandable to 64GB) to store up to 8000 songs. Perfect for activities where a phone is not practical, such as swimming.

Note: For underwater use, always switch to MP3 mode. Bluetooth signals do not transmit effectively through water.

4.4 Bluetooth Pairing

1. Ensure the headphones are powered off.
2. Press and hold the MFB button until the indicator light flashes red and blue, indicating pairing mode.
3. On your device, enable Bluetooth and search for "DOOGEE BoneBeat Swim".
4. Select the headphones to pair. Once connected, the indicator light will turn blue.

The headphones support multi-point connection, allowing simultaneous connection to two Bluetooth devices.

Image: Headphones shown connected to a smartphone, tablet, and smartwatch, illustrating dual device connection.

4.5 Loading Music (MP3 Mode)

To load music onto the internal 32GB storage:

1. Connect the headphones to your computer using the magnetic charging cable.
2. The headphones will appear as a removable disk drive.
3. Drag and drop your audio files (WMA, APE, FLAC, WAV, MP3) into the headphone's storage.
4. Safely eject the device from your computer before disconnecting.

4.6 EQ Adjustment

The headphones offer different EQ modes for an optimized listening experience:

• Bluetooth Mode: Dual EQ mode (Standard Sound Effect + Vocal Sound Effect).
• MP3 Mode: Dual EQ mode (Standard Sound Effect + Swimming Sound Effect).

Refer to the quick start guide or experiment with button combinations to switch between EQ modes.

5. Maintenance and Care

5.1 Waterproofing (IP68)

The BoneBeat Swim headphones are IP68 waterproof, allowing them to be submerged up to 1.5 meters deep for 1 hour. They feature secure dual-seal protection for reliable performance in water.

Image: BoneBeat Swim headphones submerged in water, emphasizing IP68 waterproof rating.

Important Notes:

• After contact with seawater, immediately wash the headphones with fresh water to prevent corrosion.
• Do not use the headphones in a hot bath or sauna, as extreme temperatures and steam can damage the device.
• Ensure the charging port is dry before charging to prevent damage.

5.2 Cleaning

Wipe the headphones with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials. For the charging contacts, use a dry cotton swab to gently clean any debris.

5.3 Storage

When not in use, store the headphones in the provided storage case to protect them from dust, scratches, and impact. Keep them in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

• No Power: Ensure the headphones are fully charged. If not, connect to the charger for at least 10 minutes.
• Cannot Pair via Bluetooth:
  • Ensure the headphones are in pairing mode (flashing red and blue indicator).
  • Turn off and on Bluetooth on your device.
  • Move the headphones closer to your device (within 10 meters).
  • Forget the device in your phone's Bluetooth settings and try pairing again.
• No Sound:
  • Check the volume level on both the headphones and your connected device.
  • Ensure the headphones are correctly connected via Bluetooth or in MP3 mode.
  • If in MP3 mode, ensure music files are loaded correctly.
• Poor Sound Quality:
  • For Bluetooth, ensure you are within range and there are no major obstructions.
  • Check the EQ settings; try switching to a different EQ mode.
  • Ensure the transducers are positioned correctly on your cheekbones.
• Headphones not recognized by computer:
  • Ensure the magnetic charging cable is securely connected.
  • Try a different USB port or computer.
  • Ensure the cable is not damaged.

7. Specifications

Image: A comparison table detailing specifications across BoneBeat Run, Swim Lite, and Swim models.

8. User Tips

• Optimal Sound: Experiment with the placement of the bone conduction transducers on your cheekbones for the best sound experience.
• Swimming Performance: Always use MP3 mode when swimming, as Bluetooth signals are significantly weakened or blocked by water.
• Earplugs for Swimming: Use the provided swimming earplugs to enhance sound clarity and protect your ears while underwater.
• Battery Management: For longer battery life, avoid fully draining the battery frequently. Charge regularly, especially before long activities.
• Open-Ear Safety: The open-ear design allows you to stay aware of your surroundings, which is crucial for outdoor activities like cycling or running.

9. Warranty and Support

DOOGEE products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the service card included in your package or visit the official DOOGEE website. Keep your proof of purchase for warranty claims.