SNOOKER SK-420P

Contents

Snooker SK-420P Ice Cube Machine

Model: SK-420P | Brand: SNOOKER

1. Introduction

The Snooker SK-420P is a high-capacity modular ice cube machine designed for commercial, hotel, and household applications. This robust ice maker features a durable stainless steel housing, intuitive touchpad control, and advanced ice-making technology to produce crystal-clear cube ice efficiently. Its modular design allows for flexible installation and easy maintenance, ensuring a reliable supply of ice for various needs.

Snooker SK-420P Ice Cube Machine main unit

Figure 1: Snooker SK-420P Ice Cube Machine

2. Specifications

The following table outlines the key technical specifications for the SK-420P Ice Cube Machine:

FeatureSpecification
ModelSK-420P
Overall Dimension (L*W*H)560*830*1718 mm
Daily Output420 lb (190 kg)
Ice Bin Capacity230 lb (105 kg)
Voltage220V/50Hz
Power920 W
Condenser UnitAir/Water
RefrigerantR404A
Net Weight (Main Machine)52 kg
Net Weight (Ice Bin)35 kg
Gross Weight (Main Machine)56 kg
Gross Weight (Ice Bin)40 kg
Packing Dimension (Main Machine)655*750*620 mm
Packing Dimension (Ice Bin)645*890*1055 mm
Control PanelTouchpad
Housing MaterialStainless Steel
ApplicationHotel, Commercial, Household
Input Water TypeTap Water
Ice ShapeCube
StyleSplit
Cooling WayAir Cooling
Warranty1 year (whole unit), 3 years (compressor)
Snooker SK-420P Ice Cube Machine dimensions and specifications

Figure 2: Detailed dimensions and specifications for SK-420P

Ice cubes with size measurements

Figure 3: Ice cube dimensions (22mm, 28mm, 32mm)

3. Setup and Installation

Proper setup is crucial for the optimal performance and longevity of your ice machine. Please follow these guidelines:

3.1 Placement

  • Place the ice machine on a level, stable surface capable of supporting its weight when full of ice.
  • Ensure adequate ventilation, especially if using the air-cooled model. Refer to the overall dimensions (560*830*1718 mm) and allow sufficient clearance around the unit for airflow.
  • Avoid direct sunlight or proximity to heat sources.

3.2 Water Connection

  • Connect the machine to a potable tap water supply.
  • Ensure the water pressure is within the recommended range for commercial ice makers.

3.3 Drainage

  • Connect the drainage line to an appropriate drain.
  • Important: The drain should be no more than 200mm higher than the machine's drain outlet to ensure proper water flow and prevent back-up.

3.4 Electrical Connection

  • Connect the ice machine to a dedicated 220V/50Hz electrical outlet.
  • Ensure the electrical circuit can handle the machine's 920W power requirement.

4. Operating Instructions

The SK-420P Ice Cube Machine is designed for user-friendly operation with its touchpad control panel.

4.1 Initial Start-up

  1. After completing the setup, ensure all connections (water, drain, electrical) are secure.
  2. Turn on the water supply to the machine.
  3. Plug in the power cord.
  4. Use the touchpad control panel to initiate the ice-making cycle. The machine will automatically fill with water and begin the freezing process.

4.2 Ice Production

  • The machine utilizes a unique patented siphon drainage system that prevents scale buildup, contributing to the production of more crystal-clear ice.
  • An overflow drainage system continuously drains scale from the bottom of the water tank, making the ice more transparent and harder. This process also lowers the ice center temperature, prolonging its melting time for a more refreshing drink experience.

4.3 Features for Convenience and Hygiene

  • Cold Light Lamp: A thoughtfully designed cold light lamp allows users to retrieve ice in low-light conditions without causing disturbance.
  • Optional UV Germicidal Lamp: For enhanced hygiene, an ultraviolet germicidal lamp can be easily added to ensure cleaner ice, promoting healthier consumption and an environmentally friendly operation.
Ice cube evaporator tray

Figure 4: Ice evaporator tray producing cube ice

5. Maintenance

Regular maintenance ensures the efficiency and longevity of your Snooker SK-420P Ice Cube Machine.

5.1 Cleaning the Ice Machine

  • Easy Access: The machine is designed for convenient maintenance. The front panel can be removed by unbolting four screws. The frame structure allows for quick removal of the right and left side panels, roof, and back panel, providing full access to internal components for cleaning and inspection.
  • Water System: Despite the siphon and overflow drainage systems that reduce scale buildup, regular cleaning of the water tank, evaporator, and water lines is recommended to maintain optimal ice quality and prevent mineral deposits. Use a food-grade descaling solution as per manufacturer recommendations.
  • Ice Bin: Periodically clean and sanitize the ice storage bin to prevent bacterial growth and ensure hygienic ice.
  • Condenser: For air-cooled models, regularly clean the condenser fins to ensure efficient heat exchange and prevent overheating. Dust and debris can accumulate, reducing performance.

5.2 Component Overview

Diagram of ice machine components including evaporator, motor, compressor, PCB, inlet valve, expansion valve

Figure 5: Key internal components and accessories

6. Troubleshooting

Before contacting support, please check the following common issues:

  • No Power: Ensure the machine is properly plugged into a functioning 220V/50Hz outlet and that the circuit breaker has not tripped.
  • No Water Supply: Check if the water supply valve is open and if there is adequate water pressure.
  • No Ice Production: Verify that the machine is turned on and the ice-making cycle is activated via the touchpad. Check for any blockages in the water lines or evaporator.
  • Poor Ice Quality: Ensure regular cleaning of the water system. Hard water can lead to cloudy ice; consider a water filter if this is a persistent issue.
  • Drainage Issues: Check the drain line for kinks or blockages. Ensure the drain is not elevated more than 200mm above the machine's drain outlet.
  • Error Codes: If your machine is equipped with the optional intelligent voice system, it can report specific faults, making diagnosis easier. Refer to the system's voice prompts for guidance.

7. User Tips

  • Maintain Ice Clarity: Even with the advanced siphon drainage, periodically inspect and clean the water system components to ensure consistently clear and high-quality ice.
  • Enhance Hygiene: For environments requiring the highest hygiene standards, consider installing the optional ultraviolet germicidal lamp to sterilize the ice-making process.
  • Quick Fault Diagnosis: If your model includes the intelligent voice system, pay attention to its fault reports. This feature can significantly speed up troubleshooting and maintenance.
  • Easy Access for Cleaning: Take advantage of the machine's modular design for easy access during cleaning. Removing the front panel (4 screws) and other sections simplifies thorough maintenance.

8. Warranty and Support

8.1 Warranty Information

The Snooker SK-420P Ice Cube Machine comes with the following warranty:

  • Whole Unit: 1-year warranty
  • Compressor: 3-year warranty

This warranty covers defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.

8.2 Contact Information

For technical support, service, or warranty inquiries, please contact us:

Factory Address: No. 555 Tianyi Rd, Qingpu District, Shanghai, China
Office Address: Room 610, Building D, 1058 Shenbin South Road, Minhang District, Shanghai, China
Fax: +86-21-34203259-803
Email: sales@snooker.tm
Website: www.snooker.tm
Contact information for Snooker

Figure 6: Snooker contact details

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.