1. Introduction
The ISDT F160 is an advanced AC quad-channel smart charger designed for a wide range of battery types, including LiFe, Li-Ion, LiPo, LiHv, ULiHv, NiCd/MH, and Pb batteries. Featuring a 2.4-inch IPS LCD display and powered by innovative GaN technology, it offers efficient, reliable, and simultaneous charging across all four independent channels. Each channel provides up to 40W of power, ensuring consistent performance without power sharing.
2. Safety Instructions
- Always operate the charger in a well-ventilated area, away from flammable materials.
- Do not leave the charger unattended during operation.
- Ensure correct battery type and cell count settings before starting any charging or discharging process. Incorrect settings can lead to battery damage or fire.
- Never charge damaged or swollen batteries.
- Keep the charger away from moisture, dust, and direct sunlight.
- Do not attempt to disassemble or modify the charger. Refer all servicing to qualified personnel.
- Keep out of reach of children.
- Use only the appropriate AC input voltage as specified in the specifications.
3. Package Contents
Please check the package contents upon unboxing. If any items are missing or damaged, contact your retailer.
- ISDT F160 AC Quad Channel Smart Charger
- AC Power Cable
- User Manual (this document)
4. Product Overview
The ISDT F160 features a clear IPS LCD display and intuitive controls for easy operation.

Figure 4.1: Front view of the ISDT F160 charger showing the IPS LCD display and control buttons.
4.1. Controls and Display
- 2.4" IPS LCD Display: Shows real-time charging status, battery information, and settings for all four channels.
- Navigation Button: Central multi-directional button for menu navigation and selection.
- Channel Selection Buttons (CH1, CH2, CH3, CH4): Dedicated buttons to select and configure each charging channel.
4.2. Ports

Figure 4.2: Internal view highlighting the advanced electric design and port layout.
- AC Input (100-240V): Power input for the charger.
- Main Output Ports (x4): XT60 or similar connectors for connecting batteries.
- Balance Ports (x4): For balancing Li-based batteries during charging.
- USB Output Port (5V/2A): Located on Channel 1, for charging external devices when Channel 1 is idle.
5. Setup
- Connect Power: Plug the AC power cable into the charger's AC input port, then connect it to a suitable wall outlet.
- Power On: The charger will automatically power on and display the main interface.
- Initial Check: Ensure the display is clear and responsive.
6. Operating Instructions
6.1. Charging a Battery
- Connect Battery: Connect your battery's main power lead to one of the charger's main output ports (e.g., CH1). For Li-based batteries, also connect the balance lead to the corresponding balance port.
- Select Channel: Press the corresponding channel button (CH1, CH2, CH3, or CH4) to select the channel you wish to configure.
- Set Battery Type: Navigate through the menu to select the correct battery chemistry (LiFe, Li-Ion, LiPo, LiHv, ULiHv, NiCd/MH, Pb).
- Set Cell Count: For Li-based batteries, set the correct cell count (e.g., 3S, 4S). For NiCd/MH and Pb batteries, set the appropriate voltage or cell count.
- Set Charging Current: Adjust the charging current (0.1A to 5.0A) according to your battery's specifications. A common guideline is 1C (e.g., for a 5000mAh battery, set 5.0A).
- Start Charging: Confirm the settings and start the charging process. The display will show real-time charging parameters (voltage, current, power, capacity).
- Monitor: Always monitor the charging process. The charger will automatically stop when the battery is fully charged.
Note: Each channel operates independently, allowing you to charge different battery types and configurations simultaneously.

Figure 6.1: The ISDT F160 delivers stable 40W output per channel for efficient, simultaneous charging.
6.2. Discharging a Battery
- Connect the battery and select the channel as described in steps 1-2 of "Charging a Battery".
- Navigate to the discharge function in the menu.
- Set the desired discharging current (0.1A to 1.0A).
- Start the discharging process.
6.3. Using the USB Output
The USB output port (5V/2A) is available on Channel 1. It can be used to charge mobile devices or power accessories.
- Connect your USB device to the USB port on Channel 1.
- The USB output will only function when Channel 1 is idle (not actively charging or discharging a battery).
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the charger. Do not use solvents or abrasive cleaners.
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the power cable and battery connectors for any signs of damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger does not power on | No power supply; faulty power cable. | Check AC power connection; try a different outlet; inspect power cable. |
| Battery not detected | Incorrect connection; damaged battery; faulty connector. | Ensure battery is correctly plugged in; check battery health; inspect connectors. |
| Charging error message | Incorrect battery settings; battery fault; over-temperature. | Verify battery type and cell count; check battery condition; allow charger to cool down. |
| Issues with unbalanced charging | Potential firmware issue. | Ensure balance lead is properly connected. If issues persist, check for firmware updates or contact ISDT support. |
9. Specifications

Figure 9.1: Detailed specifications and dimensions of the ISDT F160 charger.
| Feature | Detail |
|---|---|
| Model No. | F160 |
| Input Voltage Range | 200-240V~ 50Hz 2.5A (EU); 110-130V~ 60Hz 4A (US) |
| Output Voltage | Channel 1: 5-18.5V; Channels 2-4: 2.5-18.5V |
| Charging Current | 0.1-5.0A x4 |
| Discharging Current | 0.1-1.0A x4 |
| Maximum Charging Power | 40W x4 |
| Maximum Discharging Power | 5W x4 |
| Supported Battery Types and Cell Counts | LiFe, Lilon, LiPo, LiHv, ULiHv 1-4S | Pb 2-7S | NiCd/MH 4-12S |
| Balancing Current | 0.5A / Cell (Max) |
| USB Output Power | 5V/2A (only when Channel 1 is idle) |
| Operating Temperature | 0°C-40°C |
| Storage Temperature | -20°C-60°C |
| Dimensions | 130x128x41mm |
| Weight | 380g |
10. User Tips
- Firmware Updates: If you experience issues, particularly with unbalanced charging, check the official ISDT website for any available firmware updates. Keeping your charger's firmware up-to-date can resolve known bugs and improve performance.
- Battery Health: Regularly inspect your batteries for any signs of damage or swelling before charging. This ensures safety and prolongs battery life.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.