Introduction
Thank you for choosing the DIVEDEER YTK334 Window Cleaner Robot. This smart automatic cleaning machine is designed to simplify your window cleaning tasks with advanced features like water spray, anti-fall technology, and magnetic adhesion. This manual provides essential information for the safe and efficient operation and maintenance of your device.
Please note that while some units may feature the 'DIVEDEER' brand logo and others may not, both versions are functionally identical. Products are dispatched randomly. This product requires a continuous power connection to operate correctly. The built-in battery serves as a backup to prevent falls during accidental power outages, providing approximately 20 minutes of power. It is recommended to charge the robot for at least 2 hours upon first receipt.
Product Overview
Components


The DIVEDEER YTK334 package typically includes:
- Product Host (Window Cleaner Robot)
- Remote Control (with batteries)
- Adapter (with power extension cable 5.5 meters)
- DC Plug Cable
- Water Filling Bottle
- Cleaning Cloths (x10)
- Cleaning Rings (x4)
- Safety Rope
- Instruction Manual
Key Features
- Automatic Water Spray Function: Features a 30ML large water tank and an atomizing nozzle for fog condensation dust removal. Approximately 1.4 ml of water cleans up to 1 square meter.
- Precise Cleaning: Offers precise control of water output, ensuring surfaces are wet enough for cleaning without excessive moisture.
- Multiple Cleaning Modes: Supports three distinct cleaning paths: Up to Down, Left to Down, and Right to Down.
- Remote Control: Operates via 2.4G/infrared remote control for convenient command.
- High-Efficiency Brushless Motor: Provides strong power, high speed, smooth operation, and extended durability with reduced noise.
- Versatile Application: Suitable for various smooth surfaces including windows, mirrors, sliding doors, tiles, and walls.
- Dual Plate Dual Suction: Mimics manual cleaning with a 70rpm scrubbing motion for thorough dirt removal without leaving traces.
- Advanced Technology: Incorporates Artificial Intelligence Systems for route planning, UPS power failure protection, and Bezel Sensing.
- Slim Design: With a 9.5cm thin body, it can navigate and clean windows with guardrails or security features greater than 9.5cm.
- Strong Adsorption: 2800pa suction power ensures firm adhesion and prevents falls.
- Backup Battery: Built-in Li-ion battery provides approximately 20 minutes of power in case of accidental power disconnection.
Setup
- Unpack and Inspect: Carefully remove all components from the packaging. Verify that all items listed in the 'Product Overview' section are present and undamaged.
- Initial Charging: Before first use, connect the robot to the power adapter and charge it for more than 2 hours. This ensures the internal backup battery is sufficiently charged.
- Attach Cleaning Cloths: Securely attach the provided cleaning cloths to the cleaning rings on the underside of the robot.
- Connect Power: Connect the power adapter to the robot's power connector and then plug the adapter into a suitable power outlet (100-240V). Ensure the plug nut is tightened for a secure connection.
- Attach Safety Rope: For safety, always attach the safety rope to a secure anchor point indoors before placing the robot on the window.
- Fill Water Tank: Open the water tank cap and use the provided water filling bottle to fill the 30ML water tank with appropriate window cleaning solution or distilled water. Close the cap securely.

Operating Instructions
- Power On: After connecting the power and attaching the safety rope, place the robot on the glass surface. Press and hold the on/off button on the robot's fuselage for 3 seconds to activate it. The indicator light will show its status.
- Select Cleaning Mode: Use the remote control to select your desired cleaning mode (Up to Down, Left to Down, or Right to Down). The robot will automatically plan its cleaning path.
- Activate Water Spray: For enhanced cleaning, especially on stained surfaces, use the remote control to turn on the automatic water spray function.
- Monitoring: Observe the robot's cleaning progress. The indicator lights provide status feedback: Blue for normal operation, Orange for charging, and Red for an abnormal state.
- Power Off and Remove: Once cleaning is complete, or if you need to stop the robot, press and hold the switch on the fuselage for 3 seconds to turn off the machine. Carefully remove it from the glass surface.


Maintenance
- Clean/Replace Cleaning Cloths: After each use, remove the cleaning cloths from the robot. Wash them thoroughly or replace them with new ones. The package includes 10 cleaning cloths for convenience.
- Clean Cleaning Rings: Periodically inspect and clean the cleaning rings to ensure they are free from debris. The package includes 4 cleaning rings for replacement.
- Wipe Robot Body: Use a soft, dry cloth to wipe down the exterior of the robot, removing any dust or residue.
- Empty Water Tank: If any cleaning solution remains in the water tank after use, empty it and rinse the tank to prevent residue buildup.
- Store Properly: Store the robot and its accessories in a clean, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
Indicator Light Meanings

- Blue Light: Indicates normal operating status.
- Red Light: Indicates an abnormal state or error. Check for obstructions, ensure proper adhesion, or restart the device.
- Orange Light: Indicates the robot is currently charging.
- Green Light: Indicates charging is complete.
Power Failure

In the event of an accidental power failure, the machine will sound an alarm. The built-in Li-ion battery provides approximately 20 minutes of backup power to prevent the robot from falling. During this time, promptly remove the machine from the glass surface. Do not attempt to operate the robot without external power during a power outage.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | DIVEDEER |
| Model | YTK334 |
| Voltage | 100 - 240 V |
| Certification | CE |
| Origin | Mainland China |
| Water Tank Capacity | 30 ML |
| Cleaning Efficiency | 1.4 ml water cleans up to 1 square meter |
| Adsorption Strength | 2800 pa |
| Body Thickness | 9.5 cm |
| Motor Type | High-efficiency Brushless Motor |
| Wiping Motion | 70 rpm scrubbing motion (Dual Plate) |
| Remote Control Type | 2.4G / Infrared |
| Backup Battery Life | Approx. 20 minutes (Li-ion) |
| Package Dimensions (L x W x H) | 32 cm x 18 cm x 18 cm |
| Package Weight | 2.0 kg |
User Tips
- Always ensure the robot is connected to a power source during operation. The internal battery is for emergency backup only.
- For optimal performance and safety, fully charge the robot for at least 2 hours before its initial use.
- The one-touch start button on the fuselage makes operation simple and accessible for users of all ages.
- Regularly clean or replace the microfiber cloths to maintain cleaning efficiency and prevent streaks.
- Always use the safety rope, securely fastened, when operating the robot on windows, especially at height.
Warranty and Support
For any damage or quality issues with the product upon receipt, please contact our customer service team immediately. Provide your order number and a complete unboxing video to cutelin9@qq.com. Our customer service will assist you in resolving the issue promptly upon receiving your email and video documentation.