XIWBSY X06 Smart Home Theater Projector User Manual

1. Introduction

Thank you for purchasing the XIWBSY X06 Smart Home Theater Projector. This manual provides detailed instructions for setting up, operating, and maintaining your projector to ensure optimal performance and longevity. Please read it thoroughly before use and keep it for future reference.

2. Packing List

Please check the package contents upon arrival. If any items are missing or damaged, contact customer support.

• 1x XIWBSY X06 Projector
• 1x Remote Control (Batteries not included)
• 1x Power Cable
• 1x HDMI Cable
• 1x AV Cable
• 1x User Manual
• 1x Packing Box

Image: XIWBSY X06 Projector and its included accessories.

3. Product Overview

3.1. Projector Components

Image: Front, top, and rear views of the projector with labeled parts.

1. Lens cap
2. Camera
3. IR receiver
4. IR receiver
5. AV interface
6. 3.5mm port for audio output
7. HDMI port
8. USB port
9. WAN port
10. Speaker
11. Power interface

3.2. Remote Control Functions

Image: Remote control layout with button descriptions.

1. Power Switch
2. Direction Button
3. Confirm Button
4. Menu Button
5. Volume+
6. Volume-
7. Signal Source
8. Home Button
9. Back Button
10. Mouse (toggle mouse cursor input)
11. Lens Forward
12. Lens Backward
13. Mute

Note: For some apps or websites, switch to mouse cursor input action using the Mouse button.

4. Setup

4.1. Important Safety Instructions

• Do not install the projector in places without proper ventilation, in hot and humid places, or in dusty or smoky places.
• Do not block the ventilation holes (intake or exhaust).
• Do not install the projector near temperature and smoke detectors, as this may cause sensor failure.
• Avoid installing the projector in areas where warm and cool air will blow directly onto it, as this may cause moisture condensation or large temperature changes.
• The ideal working temperature is between 5°C and 35°C.

4.2. Projector Placement

The projector can be placed in various positions:

Image: Projector placement options.

• Front Projection Ceiling Mount: Projector mounted on the ceiling, projecting from the front.
• Rear Projection Ceiling Mount: Projector mounted on the ceiling, projecting from the rear.
• Front Projection Table Mount: Projector placed on a table, projecting from the front.
• Rear Projection Table Mount: Projector placed on a table, projecting from the rear.

Note: Ensure a gap of at least 30 cm from the wall for proper ventilation. If ceiling mounting with a screen, the projector should not be higher than the upper edge of the screen to avoid image distortion.

4.3. Ceiling Installation

To install the projector on the ceiling:

1. Purchase a universal projector ceiling mount.
2. Remove the four rubber pads from the bottom of the projector to reveal the screw holes.
3. Use M4*10mm screws to attach the projector to the ceiling mount.

Image: Ceiling installation diagram.

4.4. Projector Distance & Size

The recommended projection screen size is around 100 inches with a projection distance of approximately 9.2 ft (2.81m). Ambient darkness will improve the clarity of the projected images.

Image: Screen size vs. projection distance guide.

5. Operating Instructions

5.1. Power On/Off

1. Plug the power cord into an outlet.
2. Remove the lens cover.
3. Press the power button on the projector or remote control to turn on the projector.

5.2. Adjusting the Projected Image

Autofocus

After adjusting the size and distance, if the image is still unclear, press the remote control's F+/F- buttons to adjust until a clear image is obtained. The projector features TOF Laser Auto-Focus for quick adjustments.

Image: Projector demonstrating auto-focus and other smart adjustments.

Auto Obstacle Avoidance

1. Use the remote control to navigate to the settings icon on the main menu and press OK.
2. Select the projection method icon, press OK to enter.
3. Select "Automatic obstacle avoidance" in the "Projection" column. The projector will automatically avoid obstacles after refocusing.

Auto Access Screen

1. Navigate to the settings icon on the main menu and press OK.
2. Select the projection method icon, press OK to enter.
3. Select "Auto access screen" in the "Projection" bar, then select "START". The screen size will adjust automatically.

Note: When using auto access screen, ensure all corners of the screen are within the projection area. Auto Trapezoid will be turned off after zoom setting.

Four-Point Keystone Correction

If the projected image is not rectangular, you can manually adjust it:

1. Enter the settings interface using the remote control or projector buttons.
2. Select the projected image settings, press OK to enter.
3. Select "Auto Trapezoid" in the "Projection" column and turn it OFF to enter manual adjustment mode.
4. Select "Point Trapezoid" and press OK. Use the direction buttons to adjust the projected image. Press OK to move to the next corner point.
5. After adjusting all four points, press the return key to save the current state.

5.3. Input Source Selection

HDMI Mode

1. Connect your device (e.g., TV Box, laptop) to the projector using an HDMI cable.
2. Press and hold the Source button on the projector or remote control to enter the input source interface.
3. Select the corresponding HDMI input (HDMI1 or HDMI2) and press OK. Press the return key to exit.

Image: HDMI connection and input selection.

AV Mode

1. Connect your device to the projector using an AV cable.
2. Press and hold the Source button on the projector or remote control to enter the input source interface.
3. Select "AV" and press OK. Press the return key to exit.

Image: AV connection and input selection.

USB Mode

1. Connect a USB disk to the projector. The USB disk will be highlighted on the main interface.
2. Select the corresponding module (Movie, Music, Picture, Office Suite) for the file type and press OK to enter.

Image: USB connection and file access.

5.4. WiFi Settings

1. Use the remote control to enter the settings interface.
2. Find "NETWORK" in the settings, press OK to enter WiFi settings.
3. Press OK to turn on WiFi. A list of available WiFi networks will appear.
4. Select the desired WiFi network, press OK to display the virtual keyboard.
5. Use the remote control to enter the password. Place the cursor on "Finish" and press OK to complete.

Image: WiFi setup process.

5.5. Screen Mirroring

For iOS Devices (via WiFi)

1. Connect the projector to WiFi and ensure your iPhone is connected to the same WiFi network.
2. On the projector's main menu, select the settings icon and then the WiFi option.
3. Select the WiFi network, enter the password using the virtual keyboard, and connect.
4. After connecting, use the directional buttons to move the cursor to "Connect" and press OK.
5. On your iOS device, slide up to access the options interface, tap the Screen Mirroring icon, select the projector name (e.g., Eshare-xxxx), and tap Connect.

Image: iOS screen mirroring guide.

For Android Devices (via WiFi)

1. Connect the projector to WiFi and ensure your Android device is connected to the same WiFi network.
2. On the projector's main menu, select the Eshare icon and press OK.
3. Follow the on-screen prompts to scan the Eshare QR code with your mobile device. Download and open the Eshare APP.
4. Use the mobile device mirroring function within the Eshare APP for one-click screen sharing.

Image: Android screen mirroring guide using Eshare app.

For Windows PC (Wireless Miracast)

1. Connect the projector to WiFi and ensure your Windows PC is connected to the same WiFi network.
2. On your PC, open a web browser and go to http://h.eshare.app. Select the "Eshare for Windows" option to download.
3. After installation, open the EShare APP, select one-click screen sharing.

Image: Windows PC screen mirroring guide using Eshare app.

5.6. Bluetooth Mode

Connecting to External Speakers

1. Enter the projector's settings interface.
2. Find "Bluetooth" settings, press OK to enter.
3. Select "Add accessory". A list of Bluetooth devices will appear.
4. Select the desired Bluetooth speaker from the list and press OK to pair.
5. Once connected, the Bluetooth device will show as connected.

Connecting to a Phone (as a Bluetooth speaker)

1. On the main interface, navigate to "APPS" using the remote control.
2. Move the cursor down to the Bluetooth icon under "My apps" and press OK to enter the Bluetooth connection interface.
3. On your mobile phone, turn on Bluetooth, find the projector's Bluetooth name ("Projector"), and tap to pair.

5.7. APP Download

1. On the projector's main menu, navigate to the "APP Store" icon using the remote control and press OK.
2. Click the search icon within the APP Store to find and download desired applications.

Image: App Store interface for downloading applications.

6. Maintenance

6.1. Power Supply Precautions

• Always power off the device before removing the power supply from the socket.
• Use the power cord with caution to avoid bending it, as damaged cords can cause electric shock or fire.
• Unplug the device during lightning storms or if unused for a long period.
• Never touch the power cable or connection with wet hands.
• Unplug the power cord from the outlet after use.

6.2. General Care

• Do not look directly into the lens, as it may cause severe eye injury.
• During and after use, the temperature near the air outlet will rise; avoid touching it to prevent burns.
• Do not place the projector in a room that is too warm or too cold, as extreme temperatures can shorten the device's lifespan.

6.3. Repairs

• Do not attempt to repair the projector yourself.
• No components in the projector can be repaired by customers.
• Please entrust qualified professional maintenance personnel for any repairs.

7. Troubleshooting

Q1: Blurry Image

• Ensure the projection distance is greater than the minimum projection distance of 1.3 m.
• Adjust the focus ring.

Q2: The projector image shows no signal

• Make sure all cables are connected properly and stably.
• Check that the correct input source mode has been selected (e.g., if using HDMI, select HDMI input).

Q3: Remote Unresponsive

• Ensure the remote points directly at the IR receiver.
• Do not cover the IR receiver.
• Try a new pair of AAA batteries.

Q4: The projector stops automatically after a period of time

• Check if the projector's air inlet and outlet are blocked by other objects.
• Verify that the local mains voltage is not too low, too high, or fluctuating excessively.

8. Specifications

9. User Tips

• Automatic Setup: The projector's auto-focus, keystone, and zoom features work very well, often requiring no manual alignment.
• Daylight Visibility: Users report good visibility even in daylight or well-lit rooms, though ambient darkness enhances clarity.
• Sound Quality: The built-in speakers provide good sound with a hint of bass.
• App Compatibility: The projector supports a wide range of apps, including Netflix and YouTube, via Google TV.
• Video Playback: If the basic player has no sound, installing VLC media player can resolve the issue.

10. Warranty and Support

10.1. Warranty Policy

The XIWBSY X06 Projector comes with a 1-year manufacturer warranty. This includes free spare parts and lifetime free technical support. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by human error or misuse.

10.2. Customer Support

For any technical assistance, troubleshooting, or warranty claims, please contact XIWBSY customer support. We are committed to providing professional after-sales service.