1. Product Overview
Dear user, to ensure correct usage of this product, please read this manual carefully before use.
Product Features
- Compact Design: Lightweight in size and weight, high in efficiency, low in working noise, and reasonable in design.
- Advanced Control: Adopts efficient SPWM Pulse Width Control Technology.
- High-Quality Components: Utilizes multiple high-tech and intelligent driver chips, SMT Chip Mounting Technology for precise control, high reliability, and low failure rate.
- Efficient Performance: High efficiency conversion rate, strong load capacity, and wide application range.
- Intelligent Protection: Multiple intelligent security protection functions are integrated.
Main Components

Figure 1: Inverter LCD Display and Output Sockets. The display shows Battery Level, Frequency, Output Voltage, Temperature, Power, and Input Voltage. It also indicates the Output Sockets and the ON/OFF switch.
- Indicator Light: Green indicates normal operation, Red indicates protection status.
- Universal Shaped Socket: For connecting various electrical appliances.
- Independent Switch: To power the inverter on/off.
- Input Terminals: Positive (Red) and Negative (Black) terminals for battery connection.
- Efficient Cooling Fan: Helps maintain optimal operating temperature.

Figure 2: Internal components including pure copper large transformer, pure copper filter large inductance, high voltage capacitance, and high quality pressure-resistant mos tube.

Figure 3: The inverter offers high compatibility with various electrical appliances such as electric drills, speakers, cameras, coffee machines, iPads, grills, water heaters, refrigerators, and rice cookers.
2. Setup and Connection
Requirements for Usage Environment
- Dry Conditions: Do not immerse the inverter in water or expose it to rain.
- Temperature: Operate in a cool place with ambient temperatures between 0°C and 40°C.
- Ventilation: Do not use the power inverter in a narrow space or cover the machine. Ensure good ventilation around the unit.
Connection Methods
Attention: When directly connecting to a battery, ensure the battery's input voltage matches the inverter's input voltage. Multiple batteries can be used in parallel if needed.
Method 1: Direct Battery Connection (e.g., Car Battery)
The general car battery is 12V. It is necessary to choose a battery with the same input voltage as the power inverter. Multiple batteries can be used in parallel.

Figure 4: Use Diagram for connecting a 12V battery to the inverter. Ensure the battery voltage matches the inverter's input voltage.
Method 2: Connection via Car Cigarette Lighter
This method is suitable for power inverters equipped with a car cigarette lighter model. The cigarette lighter output can only power electrical appliances with a load of less than 150W. If the load exceeds 150W, please use Method 1.
Method 3: Connection for Electric Motorcycles
Generally, the voltage of four electric motorcycle batteries is 48V, and five batteries is 60V. The specific voltage should be subject to the voltage marked on the electric motorcycle. Select an inverter with the same voltage as the electric vehicle.

Figure 5: Diagrams illustrating series connections for 24V (two 12V batteries), 48V (four 12V batteries), 60V (five 12V batteries), and 72V (six 12V batteries) systems.
3. Operating Instructions
- Place the inverter switch in the OFF position. Then, connect the inverter to the battery, ensuring good contact.
- Confirm that the power of all electrical appliances is within the rated power range (50% of the peak power marked by the inverter), and that the peak power of inductive load electrical appliances does not exceed the peak power marked by the inverter. Then, plug the electrical plug into the 110V/220V AC output socket of the inverter.
- Turn on the switch of the power inverter. The green indicator light will illuminate, indicating normal operation.
- The red indicator light indicates that the inverter is turned off due to overvoltage, undervoltage, overload, or overheating.
- In many cases, due to the limited output of the vehicle cigarette lighter socket, the inverter may alarm or shut down. In this case, normal operation can be restored by starting the vehicle or reducing the power consumption.
Video 1: Demonstration of connecting and powering a kettle, drill, and hairdryer using the inverter.
4. Maintenance and Precautions
Matters Needing Attention
- When starting appliances like refrigerator compressors or motors, which have high peak power, turn off all electrical switches first. Then, turn on the inverter switch, and finally turn on electrical switches one by one, starting with the highest peak electrical appliance.
- If the battery voltage drops (e.g., 10.4-11.0V for a 12V battery), the inverter will sound an alarm. Turn off sensitive electrical appliances immediately. The inverter will stop outputting current if the voltage drops further (e.g., 9.7-10.3V for a 12V battery), and the red indicator light will illuminate.
- To prevent battery depletion, start the vehicle or charge the battery in a timely manner.
- Avoid input voltage exceeding the specified range (e.g., above 16V for a 12V battery) to prevent damage to the inverter.
- After continuous use, the surface temperature of the machine casing may rise to 60°C. Ensure smooth airflow and keep the inverter away from objects susceptible to high temperatures.
- This power inverter is prohibited for use by minors.
Internal Quality

Figure 6: The inverter uses high-quality pure copper core wire, which improves conversion rate and starting voltage stability, reduces resistance, and saves electricity.
Cooling System

Figure 7: Features include a smart temperature-controlled fan, mute operation, power saving, and temperature control.
5. Troubleshooting
If you encounter any issues with your inverter, refer to the table below for common problems and their solutions.
| Abnormal Phenomenon | Reason | Resolution Method |
|---|---|---|
| Indicator light not on, electrical appliance not working | Malfunction caused by battery | Check if battery output voltage is consistent with inverter voltage; replace if necessary. |
| Reverse connection of positive and negative poles | Check battery connection. Inverter may be damaged; replace or return for warranty. | |
| Poor contact at wiring | Check and tighten connecting wires and connections. | |
| Indicator light is red, electrical appliance not working | Electrical appliance power exceeds continuous power, causing overload shutdown | Use electrical appliances with power lower than the continuous power of the inverter. |
| Electrical appliance power is less than continuous, but peak power is too high | Ensure peak power of electrical appliances is within the inverter's peak power range. | |
| Battery discharged (alarm) | Charge or replace the battery. | |
| Poor ventilation, causing overheating shutdown | Turn off, cool for 15 mins, remove obstructions, improve ventilation, reduce load, and restart. | |
| Input voltage too high | Check the working status of the charging system. | |
| Output voltage too low | Measured output voltage of voltmeter is too low | Measure output data with a "true RMS multimeter" for accuracy. |
| Inverter emits buzzing alarm sound | Undervoltage or over temperature protection | Shorten or use thicker wires for battery connection, lower machine temperature, improve ventilation, place in cool place, reduce load. |
| Inverter only usable for low-power appliances | Voltage decays when current passes through wire | Reduce wire length and use thicker wires. |
| Battery usage time too short | Electrical power consumption is greater than rated power | Use a larger capacity battery. |
| Poor or damaged battery health | Replace the battery. | |
| Electricity stored after full charge is insufficient | The charger cannot fully charge the appliance; replace with a better intelligent charger. | |
| Current decays as it passes through a wire | Reduce the length of the wire and use thicker wires. |
6. Specifications
Main Technical Parameters
- Output Voltage: 220V / 110V
- Current Frequency: 50Hz, 60Hz
- Current Waveform: Corrected Sine Wave or Pure Sine Wave
- Input Voltage: DC 24V (also available in 12V, 48V, 60V models)
- Built-in Fuse: 10A / 15A / 20A / 40A / 70A / 120A / 240A (varies by model)
- Under Voltage Alarm: 10.4-11.0V / 20.5-22V / 42-45V / 54-57V (depending on input voltage)
- Low Pressure Shutdown: 9.7-10.3V / 19.4-20.6V / 39-42V / 48-52V (depending on input voltage)
- Overpressure Shutdown: 14.5-15.5V / 29-31V / 58-62V / 74-80V (depending on input voltage)
- No-load Current: <0.3A
- Conversion Rate: >90%
- Certification: CE
- Socket Type: Universal
Power Ratings and Dimensions by Model

Figure 8: Detailed specifications for 1000W, 1600W, and 3000W models, including rated power, peak power, output/input voltages, product/package sizes, and packing weights.

Figure 9: Detailed specifications for 1600W, 4000W, 5000W, and 6000W models, including rated power, peak power, output/input voltages, product/package sizes, and packing weights.
Warm reminder: Continuous power vs. Peak power
- Inverter 1000W: Continuous power is 300W, peak power is 1000W.
- Inverter 1600W: Continuous power is 800W, peak power is 1600W.
- Inverter 3000W: Continuous power is 1300W, peak power is 3000W.
- Inverter 4000W: Continuous power is 1600W, peak power is 4000W.
- Inverter 5000W: Continuous power is 2200W, peak power is 5000W.
- Inverter 6000W: Continuous power is 2700W, peak power is 6000W.
7. Warranty and Support
Warranty Terms
This product comes with a three-year warranty. To ensure proper after-sales service, customers must strictly follow the instructions when receiving the product.
- Product Exchange Application: Accessories must be complete and not affect secondary sales. Missing accessories will be deducted based on the factory price.
- Product Warranty Application: If the machine encounters quality problems without opening or modifying the original packaging, it will be repaired or replaced. If problems arise due to unauthorized opening or modification, maintenance will be charged.
- If the machine casing is too dirty or old and used in harsh environments, resulting in product damage, maintenance will be charged.
- For high-power machine casings that are severely scratched, dirty, or old, they should be returned to the factory for repair. After being repaired within the warranty period, the machine will be returned to the customer in its original condition and repaired for free. For machines that have been modified or unpacked without permission, any malfunctions will be charged for maintenance.
- After receiving the relevant fees, we will promptly handle the after-sales service and deliver the product to the customer by express delivery.
For a detailed user manual in PDF format, please refer to the official document: User manual (PDF).
For any inquiries regarding returns or exchanges, please contact customer service to obtain the return address and phone number.
8. User Tips
- Always verify the continuous power rating of your inverter against the power requirements of your appliances to avoid overload.
- For optimal performance and longevity, ensure your inverter is placed in a well-ventilated area, free from obstructions.
- Regularly check battery connections for tightness and cleanliness to prevent poor contact and voltage drops.
- If using with a car, consider starting the vehicle when powering high-wattage appliances to prevent excessive battery drain.