1. Product Overview
This manual provides instructions for the JINGSHA X99 D4 PLUS Motherboard Kit, which includes the X99 D4 PLUS motherboard, an Intel Xeon E5 2680 V4 CPU, 32GB (2x16GB) DDR4 2400MHz ECC RAM, a 256GB M.2 NVMe SSD, and a CPU cooler. This kit is designed for building high-performance desktop computers.
2. Safety Information
Please read and understand the following safety precautions before installing or operating your motherboard kit:
- Always disconnect the power supply from the wall outlet before touching any internal components.
- Wear an anti-static wrist strap or frequently touch a grounded metal object to discharge static electricity, which can damage electronic components.
- Handle components by their edges, avoiding contact with pins or circuitry.
- Ensure proper ventilation in your computer case to prevent overheating.
- Do not force components into place. If a component does not fit easily, double-check its orientation and compatibility.
3. Setup and Installation
3.1 Motherboard Layout
Familiarize yourself with the motherboard layout and its various connectors before installation.
3.2 CPU Installation
Follow these steps carefully to install the Intel Xeon E5 2680 V4 CPU:
- Step 1: Press the wire buckle on the CPU socket by hand and lift it up. Remember not to remove the black cover before installing the CPU.
- Step 2: The motherboard base has 3 bayonets (red circles in Figure 3). The CPU itself also has 3 bayonets. Align them one by one, and then gently place the CPU into the socket.
- Step 3: Lower the wire buckle that was lifted up. The black cover on the socket will pop up automatically. Remember not to remove the black cover before installing the CPU.
Precautions:
- Do not open the CPU top cover.
- Do not touch the CPU pins to contact the core.
- Do not touch the motherboard interface pins.
3.3 CPU Cooler Installation
Install the provided CPU cooler onto the CPU. Ensure proper contact between the cooler's base and the CPU's integrated heat spreader (IHS). Apply thermal paste if not pre-applied. Secure the cooler according to its specific mounting mechanism.
3.4 RAM Installation
Insert the two 16GB DDR4 2400MHz ECC REG RAM modules into the designated DDR4 slots on the motherboard. Ensure the notches on the RAM modules align with the keys in the slots. Press down firmly on both ends until the retention clips snap into place.
3.5 M.2 NVMe SSD Installation
Install the 256GB M.2 NVMe SSD into the M.2 NVMe slot. Ensure the SSD is inserted correctly to prevent interface damage.
3.6 Power Supply Connection
Connect the 24-pin ATX power connector and the 8-pin AUX12V power connector from your power supply to the motherboard. A power supply of at least 500W is recommended for stable operation.
3.7 CR2032 Battery
The CR2032 3V battery for the motherboard's CMOS will be removed before shipping due to customs regulations. Please purchase a CR2032 3V battery locally and install it into the battery holder on the motherboard.
4. Operating Instructions
After assembling all components and connecting peripherals, you can power on your system. The motherboard will perform a Power-On Self-Test (POST). If all components are detected correctly, the system will proceed to boot from your installed operating system.
4.1 BIOS and Drivers
For optimal performance and compatibility, it is recommended to install the latest drivers for your motherboard components (chipset, audio, network, etc.) and update the BIOS if necessary. Please contact customer service to obtain the necessary BIOS files and drivers.
5. Maintenance
5.1 Cooling System
The included CPU cooler is designed for efficient heat dissipation. Ensure that the cooler fans are free from dust and obstructions to maintain optimal airflow. Regularly clean the heatsink fins and fan blades using compressed air.
The copper tubes on the cooler may show signs of end sealing, which is a normal manufacturing process and not a defect.
5.2 General Cleaning
Periodically clean the interior of your computer case to prevent dust buildup on components, which can lead to overheating and reduced performance. Use compressed air to remove dust from fans, heatsinks, and other components.
6. Troubleshooting
- System not powering on: Ensure all power cables (24-pin ATX, 8-pin AUX12V) are securely connected to the motherboard and the power supply is adequately rated (at least 500W). Check the front panel power switch connection.
- No display: Verify that the graphics card (if dedicated) is properly seated in its PCI-E slot and connected to the power supply. Ensure the monitor cable is securely connected to the graphics card or integrated graphics port.
- Memory errors: Reseat the DDR4 RAM modules. Ensure they are fully clicked into place.
- M.2 SSD not detected: Confirm that the M.2 SSD is an NVMe type and not a SATA type, as the motherboard supports NVMe M.2. Ensure it is correctly seated in the M.2 slot.
- CPU issues: If the CPU is used, minor physical scratches are normal and generally do not affect performance. Ensure the CPU is correctly installed in the LGA 2011-3 socket as per the installation steps.
- BIOS/Driver issues: If experiencing instability or compatibility problems, ensure you have the latest BIOS and drivers. Contact customer service for assistance.
7. Specifications
7.1 Motherboard Specifications (X99S D4 PLUS)
| Feature | Description |
|---|---|
| Model | X99S D4 PLUS Motherboard |
| Form factor | M-ATX |
| Dimension | 240MM x 205MM |
| CPU Socket | LGA2011-3 V3/V4 Intel Xeon CPU |
| RAM Slots | 4* DDR4 slots, support up to 128GB (ECC) |
| Audio | Realtek ALC897 HD 7.1 |
| Network | Gigabit Ethernet (RTL8111H 1Gbps) |
| SATA Port | 3*SATA3.0, 2*SATA2.0 |
| M.2 Slots | M_Key / Type 2280 support NVMe PCIE3.0 x4, M_Key / Type 2280 support SATA3.0 protocol SSD |
| PCI-E Slots | 1* PCI-E3.0 X16, 1*PCI-E 3.0 X4 |
| USB Interface | 4*USB3.0, 6*USB2.0 (Front 2*USB3.0, 4*USB2.0) |
| PSU Connector | ATX 24PIN + AUX12V_8PIN |
| Other | F_PANEL, F_AUDIO, F_COM, F_SPK, 4*PIN CPU_FAN, 3PIN SYS_FAN, PS/2 Mouse, PS/2 Keyboard |
7.2 CPU Specifications (Intel Xeon E5 2680 V4)
- Processor Series: Xeon E5 2680V4
- Cores/Threads: 14 cores/28 threads
- Main frequency: 2.4GHz
- Socket type: LGA 2011-3
- 3rd level cache: 35MB
- Technology: 14nm
- Power consumption (TDP): 120W
7.3 Memory Specifications (DDR4 ECC REG)
- Type: ECC REG (server memory)
- Frequency: DDR4 2400MHz
- Capacity: 32GB (2*16GB)
7.4 SSD Specifications (HVNTECH M.2 NVMe SSD)
| Feature | Description |
|---|---|
| Product model | HVNTECH M.2 NVMe SSD |
| Operating Temperature | 0°C ~ +70°C |
| Input Voltage | DC 3.3V (plus or minus 5%) |
| Interface Protocol | PCIe Gen3x4 |
| Support Capacity | 128GB, 256GB, 512GB, 1TB |
| Maximum Read Speed | 1900MB/s |
| Maximum Write Speed | 1500MB/s |
| Product Size | 22x80x2mm |
The SSD offers high-speed performance for an upgraded storage solution.
Performance benchmarks for various SSD capacities:
8. Warranty and Support
- CPU: 1-year warranty.
- Memory: 1-year warranty.
- SSD: 3-year warranty (non-human damage).
For any technical support, BIOS files, or driver downloads, please contact customer service. They can provide assistance with specific issues and ensure you have the necessary software for your system.
9. User Tips
- Power Supply: Always use a reliable power supply of at least 500W to ensure stable operation of the X99 platform, especially with high-performance components.
- M.2 Compatibility: Double-check that any additional M.2 SSDs you plan to use are NVMe (PCIe) based, as SATA M.2 drives are not supported by this motherboard's M.2 slots.
- CR2032 Battery: Remember to purchase and install a CR2032 3V battery locally for the motherboard's CMOS functionality, as it is not included due to shipping restrictions.
- BIOS/Drivers: Keep your BIOS and drivers updated. Contact customer service for the latest versions to ensure compatibility and optimal performance.
- Component Condition: While the CPU and memory are used, they are tested and come with a 1-year warranty. Minor cosmetic imperfections on used components are normal.