Pinmany GMC10 Car Radio Cable Wire Harness Adapter with CANBus Box

Introduction

This manual provides detailed instructions for the installation and operation of the Pinmany GMC10 Car Radio Cable Wire Harness Adapter with CANBus Box. This product is designed to connect an aftermarket Android head unit to your vehicle's existing wiring harness, providing essential signals such as ACC, reverse gear, parking, lights, and steering wheel controls without cutting original car wires. The integrated CAN Bus Box ensures seamless communication between your new head unit and the car's systems.

Please read this manual thoroughly before installation to ensure correct setup and to prevent damage to your vehicle or the product.

Package Contents

The Pinmany GMC10 package includes the following components:

• Power Wire Harness: Main harness for power and signal connections.
• CAN Bus Box: Decodes vehicle data for the Android head unit.
• Warning Alarm Sound Buzzer: Provides audible alerts for certain vehicle functions.
• FM Antenna Harness: Adapter for connecting the car's FM antenna to the head unit.
• USB Wire Harness: For connecting the car's USB port to the head unit.

Specifications

Compatibility

This wire harness adapter is compatible with the following vehicle models and Android head units:

Compatible Car Models:

• Buick Regal 2009-2012
• Buick Encore (Original car center control with color display) 2013-2015
• Buick GL8 (Original car center control with color display) 2011-2015
• Buick LaCrosse 2009-2012
• Chevrolet Equinox 2010-2017
• GMC Terrain 2010-2017

Important: Due to regional differences, the above compatibility list is for reference only. It is crucial to confirm that your car's original wire harness plug matches the socket on this product before purchasing and installation.

Compatible Android Head Units:

This product is designed to adapt to 7, 8, 9, and 10-inch Android head units. It is specifically compatible with head units featuring a 16-pin main interface and specific extended interfaces as shown in the installation diagrams.

Setup and Installation

Before beginning installation, ensure your vehicle's ignition is off and the battery is disconnected to prevent electrical damage.

Pre-installation Check:

Before connecting, carefully check the interfaces on your Android head unit. This harness is ONLY compatible with head units that have a 16-pin main interface and the specific extended interfaces shown below.

Connection Steps:

1. Connect the Cable Adapter to the Android Head Unit:
   Find the 16-pin power plug of the wiring harness and connect it to the 16-pin power socket of your Android head unit. Then, locate the 8-pin UART plug of the wiring harness and connect it to the 8-pin UART socket of the Android head unit.



2. Connect the CAN Bus Box:
   Locate the 20-pin CAN plug on the wiring harness and plug it into the 20-pin socket of the CAN Bus Box.



3. Connect the Warning Alarm Sound Buzzer:
   Connect the 2-pin connector of the warning alarm sound buzzer to the corresponding 2-pin socket on the power wire harness.



4. Connect FM Antenna Harness:
   Connect one end of the FM antenna harness to your car's antenna cable and the other end to the FM antenna input on your Android head unit.



5. Connect USB Wire Harness:
   Connect the USB wire harness to your car's original USB port (if applicable) and the corresponding USB input on your Android head unit.

Operating Instructions: CAN Bus Setup

After physical installation, you need to configure the CAN Bus settings on your Android head unit. The exact steps may vary depending on your head unit's manufacturer and software version. Consult your head unit's manual or vendor if you encounter difficulties.

General CAN Bus Setup Procedure:

1. Enter Settings:
   From the main screen of your Android head unit, navigate to 'Car Settings' or a similar option.
2. Enter Factory Settings:
   Within 'Car Settings', look for 'Factory' or 'Factory Settings'. You may be prompted to enter a password. Common passwords include 3368, 1617, 8317, 8888. If these do not work, contact your Android radio seller for the correct password.



3. Enter CAN Bus Settings:
   Once in Factory Settings, find 'CAN bus setting' or 'CarType Setting'.
4. Select CAN Bus Box Manufacturer and Car Model:
   Within the CAN Bus settings, select 'Raise' as the CAN Bus Box manufacturer. Then, choose your specific car model and year from the provided list.



5. Save and Reboot:
   Save your settings and reboot the Android head unit for the changes to take effect.

Maintenance

The Pinmany GMC10 wire harness adapter requires minimal maintenance. To ensure longevity and optimal performance:

• Keep Connections Secure: Periodically check that all connections remain tight and free from corrosion.
• Avoid Moisture: Ensure the CAN Bus Box and all connectors are protected from water and excessive moisture.
• Gentle Handling: When working on your car's interior, handle the wiring and components gently to avoid accidental disconnections or damage.

Troubleshooting

If you encounter issues after installation, consider the following common problems and solutions:

• No Power to Head Unit:
  • Check all power connections (16-pin main harness) to ensure they are securely seated.
  • Verify the vehicle's fuse for the radio is intact.
  • Ensure the car's battery is properly reconnected and charged.
• Steering Wheel Controls Not Working:
  • Confirm the CAN Bus Box is correctly connected (20-pin plug).
  • Recheck the CAN Bus settings on your Android head unit (manufacturer 'Raise', correct car model selected).
  • Ensure your head unit supports steering wheel control integration via CAN Bus.
• No Sound or Intermittent Sound:
  • Check speaker wire connections on the power harness.
  • Verify audio settings on the Android head unit.
• Reverse Camera Not Activating:
  • Ensure the reverse signal wire from the harness is correctly connected to the head unit's reverse input.
  • Check head unit settings for reverse camera activation.
• Warning Alarm Buzzer Not Functioning:
  • Verify the 2-pin connection of the buzzer to the power wire harness.
  • Ensure the CAN Bus settings are correctly configured, as the buzzer relies on CAN data.

If problems persist, double-check all connections and settings. If necessary, consult your Android head unit vendor or a professional car audio installer.

User Tips

• Verify Compatibility Carefully: Always compare your car's original connectors and your Android head unit's interfaces with the diagrams provided in this manual before purchasing and installation. This is the most critical step to ensure a successful setup.
• Consult Your Head Unit Vendor: The CAN Bus setup process on Android head units can vary. If you are unsure about specific menu options or factory passwords, contact the seller or manufacturer of your Android head unit for precise instructions.
• Professional Installation Recommended: While this guide provides detailed steps, if you are not comfortable with car electrical systems, consider professional installation to avoid potential damage.

Warranty and Support

Pinmany products are designed for reliability and performance. For any questions or support needs regarding your GMC10 Car Radio Cable Wire Harness Adapter, please contact the seller directly. They can provide assistance with installation, troubleshooting, and product-specific inquiries.

For general inquiries or issues, you may also refer to the AliExpress Customer Service Center.