Multi-functional D147

Contents

Multi-functional Foot Bath Sofa/Chair User Manual

Model: D147

Thank you for choosing our Multi-functional Foot Bath Sofa/Chair. This manual provides essential information for the safe and efficient use of your new product. Please read it thoroughly before initial use and retain it for future reference.

1. Product Overview

The Multi-functional Foot Bath Sofa/Chair (Model D147) is designed to provide a comfortable and relaxing experience for foot therapy and general relaxation. It features an adjustable reclining chair integrated with a foot bath basin, offering versatility for various settings.

Front view of the Multi-functional Foot Bath Sofa/Chair in an upright position.
Figure 1: Front view of the Foot Bath Sofa/Chair (Upright)

2. Setup Instructions

  1. Unpacking: Carefully remove all packaging materials. Inspect the chair and foot bath for any signs of damage during transit. Report any damage to your supplier immediately.
  2. Placement: Place the unit on a flat, stable, and level surface. Ensure there is sufficient space around the chair for reclining and easy access.
  3. Power Connection: Locate the power cord for the foot bath unit. Plug it into a standard, grounded electrical outlet. Ensure the outlet matches the voltage requirements specified on the product label (typically 110-240V AC, 50/60Hz).
  4. Water Supply/Drainage: Position the unit in an area where water can be easily filled into the basin and drained after use. The foot bath basin is designed for manual filling and draining.

3. Operating Instructions

3.1 Chair Adjustment

  • Reclining: To recline the chair, locate the adjustment lever or button (if present, typically on the side of the chair). Engage the mechanism and lean back to the desired angle. Release the lever/button to lock the position.
  • Upright Position: To return to an upright position, engage the adjustment mechanism and lean forward.
Side view of the Multi-functional Foot Bath Sofa/Chair in a reclined position.
Figure 2: Foot Bath Sofa/Chair in Reclined Position

3.2 Foot Bath Operation

  1. Filling the Basin: Ensure the drain plug is securely closed. Fill the foot bath basin with warm water to a comfortable level. Do not overfill.
  2. Powering On: Ensure the unit is plugged in. Locate the power switch on the foot bath control panel and turn it on.
  3. Adjusting Functions: Use the control knobs or buttons on the basin to activate and adjust functions such as water temperature (if applicable), massage bubbles, or jets. Refer to Figure 3 for typical control locations.
  4. Using the Footrest: The integrated footrest can be adjusted for optimal comfort during the foot bath.
  5. Draining: After use, turn off all foot bath functions and unplug the unit. Open the drain plug to empty the water. Clean the basin thoroughly.
Front view of the foot bath basin showing control knobs.
Figure 3: Foot Bath Basin Controls

4. Maintenance

  • Cleaning the Chair: Wipe the chair upholstery with a soft, damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners. For stubborn stains, consult a professional upholstery cleaner.
  • Cleaning the Foot Bath Basin: After each use, rinse the basin with clean water. For thorough cleaning, use a non-abrasive disinfectant suitable for plastic or ceramic surfaces. Ensure all soap residue is removed.
  • Drying: Always dry the foot bath basin completely after cleaning to prevent mildew and bacterial growth.
  • General Care: Regularly check all moving parts and connections for wear and tear. Do not attempt to repair electrical components yourself.

5. Troubleshooting

ProblemPossible CauseSolution
Foot bath not powering onNot plugged in; Power switch off; Faulty outletCheck power cord connection; Ensure power switch is ON; Test outlet with another device
No bubbles/jetsFunction not activated; Water level too low/high; Blocked nozzlesActivate function via controls; Adjust water level; Clean nozzles
Chair recline mechanism stuckObstruction; Mechanism needs lubricationCheck for obstructions; Apply silicone lubricant to moving parts (avoiding upholstery)
Water leakage from basinDrain plug not sealed; Crack in basinEnsure drain plug is tight; Inspect basin for damage (contact support if cracked)

If problems persist after attempting these solutions, please contact customer support.

6. Specifications

FeatureDetail
ModelD147
DIY Supplies CategoryElectrical
StyleModern minimalism
OriginMainland China, Guangdong Province
Package Dimensions (L x W x H)65 cm x 65 cm x 65 cm
Package Weight20.0 kg
Power RequirementsStandard AC (refer to product label for specific voltage/wattage)

7. Warranty and Support

This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support, spare parts, or warranty claims, please contact your original seller or distributor. Provide your model number (D147) and purchase date when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.