LCTC LC708

Contents

LCTC PID Temperature Controller LC708 Instruction Manual

Model: LC708 | Brand: LCTC

1. Introduction

The LCTC LC708 PID Temperature Controller is a versatile and precise instrument designed for industrial temperature control applications. It supports various input and output types, offering flexible control solutions for different systems. This manual provides essential information for the safe and efficient operation of your LC708 controller.

Front view of LCTC LC708 PID Temperature Controller
Figure 1: Front view of the LCTC LC708 PID Temperature Controller, showing the display and control buttons.

2. Specifications

FeatureDescription
ModelLC708
Panel Size72mm x 72mm
Input TypesTC (K, E, J, T, B, S, Wu3_Re25, N, R), RTD (Pt100), Analog (DC 0-5V, 1-5V, 0-10V, 2-10V, DC 4-20mA)
Output TypesRelay Output (250V AC, 5A Resistive load), SSR Output (12VDC 20mA), 4-20mA Output (500 Ohm load), 0-10V Output
Alarms1 or 2 groups of alarms (Alarm Relay 250V AC 3A Resistive load)
CommunicationRS485 Modbus-RTU
AccuracyMax ±0.2%FUS, or ±1 digit
Sampling Cycle0.25 seconds
PV Bias-199 ~ 199°C or -199.9 ~ 199.9°C
Display Unit°C or °F
Power SupplyAC85-265V
CertificationCE

The controller also features advanced functions such as Fuzzy control, Autotuning, Transmission, Remote SV value setting, Double PID Heating/Cooling, 32-segment programmer control, Soft start, Digit input, and 3-wire motor valve PID control.

Detailed specifications and features of the LCTC PID Temperature Controller
Figure 2: Overview of controller features and input/output types.

3. Setup and Installation

3.1 Dimensions

The LC708 controller has a panel size of 72mm x 72mm. Ensure adequate space for installation and ventilation.

Dimensional drawings for various LCTC controllers, including 72x72mm
Figure 3: Dimensional drawings for different controller sizes. The LC708 corresponds to the 72mm x 72mm diagram.

3.2 Wiring Diagram

Refer to the following wiring diagram for proper connection. Always cross-reference with the connection stickers on the side of your specific controller for accurate field application.

Wiring diagram for LCTC PID Temperature Controllers, including 72x72mm model
Figure 4: General connection diagram for LCTC controllers. Note the specific terminals for power, inputs, outputs (Relay, SSR, Analog), and RS485 communication. INP2 is used for remote SV or position feedback.

Key Connections:

  • Power Supply: AC85-265V (Terminals L and N)
  • Input (INP1): Connect your temperature sensor (TC or RTD) or analog input signal to the designated terminals.
  • Output (OP1): Connect your control device (e.g., SSR, Relay, 4-20mA, 0-10V) to the corresponding output terminals.
  • Alarms (AL1, AL2, AL3): Connect alarm indicators or devices to these terminals.
  • RS485 Communication: Connect A+ and B- terminals for Modbus communication.
  • Auxiliary Power: +5V and AUX 24V are available.
Side view of LCTC LC708 controller showing terminal labels and model information
Figure 5: Side view of the controller with detailed terminal labels for wiring reference.

4. Operating Instructions

4.1 Display Overview

The LCD display shows the Process Value (PV), Set Value (SV), and Output Power (OP1) indicators. Alarm indicators (AL1, AL2) are also present.

Front panel of LCTC LC708 showing 0-10V input, 2 group alarms, 72x72 panel size, and Relay Output
Figure 6: Front panel highlighting key features like 0-10V input and alarm groups.

4.2 Button Functions

  • SET: Enters parameter setting mode or confirms a setting.
  • A/M: Toggles between Automatic and Manual control modes.
  • F1, F2, F3 (Arrow buttons): Used to navigate menus, adjust values, or select options.

4.3 Basic Operation

Once wired and powered on, the controller will display the current process value (PV). Use the SET button to access parameters and the arrow buttons to adjust the Set Value (SV) and other control parameters. The OP1 indicator shows the output status.

Video 1: Demonstration of the LCTC PID Temperature Controller in operation, showing the display and output control with a connected light bulb.

5. Maintenance

To ensure optimal performance and longevity of your LCTC LC708 PID Temperature Controller, follow these general maintenance guidelines:

  • Keep the controller clean and free from dust and debris.
  • Ensure proper ventilation to prevent overheating.
  • Regularly check wiring connections for tightness and signs of wear.
  • Avoid exposing the controller to excessive moisture or corrosive environments.
  • If the unit requires cleaning, use a soft, dry cloth. Do not use harsh chemicals or abrasive materials.

6. Troubleshooting

If you encounter issues with your LCTC LC708 controller, consider the following common troubleshooting steps:

  • No Power: Check the power supply connections (AC85-265V) and ensure the power source is active.
  • Incorrect Temperature Reading: Verify the sensor wiring and ensure the correct input type is configured in the controller's settings. Check the sensor for damage.
  • Output Not Activating: Confirm the output wiring is correct and the control parameters (SV, PID settings) are appropriately configured. Check the connected load device.
  • Communication Issues (RS485): Verify RS485 A+ and B- connections. Ensure the communication parameters (baud rate, parity, data bits) match the connected device.
  • Display Errors: If the display shows unusual characters or error codes, consult the full product manual (if available) for specific error code interpretations.

If problems persist after basic troubleshooting, contact qualified technical support.

7. User Tips

No specific user tips were available from provided reviews or Q&A. For best results, always ensure your sensor type matches the controller's input settings and calibrate if necessary for critical applications.

8. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the manufacturer directly. Ensure you have your product model and serial number ready when seeking support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.