SUNSHINE SS-904A SE

Contents

SUNSHINE SS-904 SE Android Battery Activation Board User Manual

Model: SS-904A SE

1. Product Overview

The SUNSHINE SS-904A SE is a specialized battery activation board designed for Android phone repair technicians. It facilitates the revival and activation of Android phone batteries, especially those that are deeply discharged or have been stored for extended periods. This tool integrates smart features such as automatic polarity identification, overload protection, and intelligent power management to ensure safe and efficient battery restoration.

SUNSHINE SS-904A SE Android Battery Activation Board with key features highlighted: 4.2V regulated output, automatic polarity identification, overload protection, automatic power-off, and battery life reactivation.
Figure 1: SUNSHINE SS-904A SE Key Features

It is compatible with over 500 Android models, including popular brands like Xiaomi, OPPO, VIVO, HTC, Samsung, and Nokia.

Diagram showing the SUNSHINE SS-904A SE board and its compatibility with over 500 Android models, listing various phone models like MI5X, NOVA9, RENO2/3, VIVO, MI9, VIVO X7, HTC, OPPO, X603, NOTE, MI MAX, MT30, MT60, Pura, Find, S24, S23+.
Figure 2: Android Model Compatibility

2. Setup and Connection

Before using the SS-904A SE, ensure you have a compatible USB-C or Micro-USB power source (e.g., a phone charger or computer USB port).

2.1 Package Contents

  • 1 x SS-904A SE Activation Board
  • 1 x USB-C Cable

2.2 Connecting the Board

  1. Identify the correct battery connector slot on the SS-904A SE board that matches your Android phone's battery. The board features multiple connection points for various models.
  2. Carefully align the battery connector with the corresponding slot on the activation board.
  3. Utilize the snap-on design for a secure and error-free connection. The built-in identification resistor automatically detects the positive and negative poles of the battery.
Close-up view of the SUNSHINE SS-904A SE board connected to an Android battery, illustrating the snap-on design and built-in identification resistor for safe and convenient operation.
Figure 3: Snap-on Battery Connection
  1. Connect the SS-904A SE board to a power source using the provided USB-C cable. The board supports both USB-C and Micro-USB interfaces for power input.

3. Operating Instructions

The SS-904A SE is designed for intelligent battery activation and charging.

3.1 Battery Activation

To reactivate a low-power or dead battery:

  1. Ensure the battery is securely connected to the activation board as described in Section 2.2.
  2. Connect the board to a power source. The board will automatically begin the activation process.
  3. The

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.