1. Introduction
This manual provides detailed instructions for the proper use and maintenance of your ANYSECU G6000 4G LTE PTT Network Radio. The G6000 is a versatile communication device combining 4G LTE Push-to-Talk (PTT) functionality with traditional UHF radio capabilities and mobile phone features. It is designed for reliable communication across various applications, including security, estate management, transport, rescue operations, and construction sites. Please read this manual thoroughly before operating the device to ensure safe and efficient use.
2. Package Contents
Please check the package contents upon unboxing. If any items are missing or damaged, contact your vendor.
- ANYSECU G6000 Radio Unit
- Battery (6000mAh Li-ion)
- Belt Clip
- Antenna
- Strap
- Smart Charger
- Charger Cable

3. Product Overview
Familiarize yourself with the main components and controls of your G6000 radio.

Key Components:
- Antenna: For signal transmission and reception.
- SOS Button: For emergency alerts.
- Volume Knob: Adjusts audio output level.
- Indicator: Status light for power, signal, etc.
- Earphone/Programming Port: Connects earphones or programming cable.
- Walkie Talkie Mic: Microphone for PTT communication.
- Network Interface: For network connectivity.
- Analog Interface: For analog radio functions.
- Exit/Hang up/Delete Button: For navigating menus and ending calls.
- Keyboard Lock/Unlock: Short press to switch between IP Radio mode and Analog mode. Press for 2 seconds to lock/unlock the keyboard.
- Telephone Mic: Microphone for phone calls.
- Menu/Dial/Confirm Buttons: For menu navigation, dialing, and confirming selections.
- UHF Radio PTT: Push-to-Talk button for UHF radio.
- IP Radio PTT: Push-to-Talk button for IP Network Radio.
- Short Press Work Mode Switch: Switches between Dual Mode Intercom/Public network intercom, Analog Intercom/Telephone mode. Press for 2 seconds to turn on/off the device.
- Speaker: Audio output.
4. Specifications
General Specifications:
| Feature | Description |
|---|---|
| Brand | Anysecu |
| Model | G6000 |
| Display | 33.9x43.8x2.5mm, 1.77 inch Color Display |
| Working Voltage | 3.3V~4.25V (Standard: 3.8V) |
| Operating Temperature | -30℃~+75℃ |
| Standard Power (Standby) | 120mA |
| Standard Power (Max Current) | 800mA |
| Battery | 6000mAh Li-ion |
| Dimensions (Volume) | 123*55*37mm |
| Weight | 295g |
Network Parameters:
| Feature | Description |
|---|---|
| System | Linux |
| Platform | RealPTT (Smart-PTT) |
| SIM Card Type | 1 Standard SIM Size |
| GPS Frequency | 1575.42±1.023MHz |
| GPS Receive Sensitivity | -152dBm |
| GPS Receive Cold Start Accuracy (outdoor) | 5 meters (50% confidence), 10 meters (95% confidence) |
| Integrated Serial | AT commands, data transmission |
| UIM Deck Level | 1.8V/2.85V |
UHF Parameters:
| Feature | Description |
|---|---|
| Analog Band | 400-470MHz |
| Storage Channels | 128 |
| Stepping Frequency | 100K, 50K, 25K, 12.5K, 10K, 6.25K, 5K |
| Output Power | 3W |
| Receive Sensitivity | Better than 0.18u |
| Emission Current | ≤1.5A |
| Maximum Output Power | 23dBm~30dBm@-104dBm |
| Receive Signal Sensitivity | -106dBm |
| Antenna Impedance | 50 ohm |
Frequency Band Compatibility:
The G6000 supports various frequency bands depending on the version (E1C, U1C, A1C) for different regions.
| Version | Recommended Area/Country | Frequency Band |
|---|---|---|
| E1C | Europe (Germany, France, UK, Italy, Belgium, Netherlands, Spain, Russia, Ukraine, Turkey, Mongolia), Africa (South Africa, Nigeria, Egypt) | LTE FDD: B1, B3, B7, B8, B20; WCDMA: B1, B8; GSM: B3, B8 |
| U1C | North America (United States, Canada) | LTE FDD: B2, B4, B5, B12, B17; WCDMA: B2, B5; GSM: B2, B5 |
| A1C | South America (Mexico, Brazil, Argentina, Chile, Peru, Colombia), Oceania (Australia, New Zealand) | LTE FDD: B1, B2, B3, B5, B7, B8, B28; LTE TDD: B40; WCDMA: B1, B2, B5, B8; GSM: Quad-Band (850/900/1800/1900MHz) |

5. Setup Guide
5.1 Installing the SIM Card and Battery
- Ensure the radio is powered off.
- Remove the battery cover on the back of the radio.
- Insert a standard size SIM card into the designated SIM card slot. Refer to Figure 4.1 for SIM card slot location.
- Insert the 6000mAh Li-ion battery into the battery compartment, ensuring proper alignment of the contacts.
- Replace the battery cover and secure it.
5.2 Attaching the Antenna and Belt Clip
- Screw the antenna clockwise onto the antenna connector on top of the radio until it is firmly seated.
- Attach the belt clip to the back of the radio using the provided screws, if desired.
5.3 Charging the Battery
- Connect the smart charger to a power outlet using the charger cable.
- Place the radio (with battery installed) into the smart charger cradle.
- The indicator light on the radio or charger will show the charging status. Ensure the battery is fully charged before first use.
6. Operating Instructions
6.1 Power On/Off
- To power on: Press and hold the "Short press work mode switch" button (usually on the side) for approximately 2 seconds until the display lights up.
- To power off: Press and hold the "Short press work mode switch" button for approximately 2 seconds until the device shuts down.
6.2 Adjusting Volume
Rotate the Volume knob (located on the top of the radio) clockwise to increase volume and counter-clockwise to decrease it.
6.3 Switching Work Modes (IP Radio / Analog / Telephone)
The G6000 supports multiple communication modes.
- Short Press Work Mode Switch: Briefly press the dedicated work mode switch button to cycle through Dual Mode Intercom/Public network intercom, Analog Intercom/Telephone mode.
- Keyboard Lock/Unlock Button: A short press of this button can also switch between IP Radio mode and Analog mode.
6.4 Push-to-Talk (PTT) Functionality
The radio features separate PTT buttons for IP Radio and UHF Radio modes.
- IP Radio PTT: Press and hold this button to transmit voice over the 4G LTE network. Release to listen.
- UHF Radio PTT: Press and hold this button to transmit voice over the UHF analog frequency. Release to listen.
6.5 Making Phone Calls
In Telephone mode, use the keypad to dial numbers and the "Menu/Dial/Confirm" button to initiate a call. Use the "Exit/Hang up/Delete" button to end a call.
6.6 GPS Location and Tracking
The G6000 is equipped with GPS for location tracking. This feature allows for monitoring and dispatching, especially useful in professional environments. Specific GPS functions and settings can be accessed via the radio's menu.


7. Maintenance
- Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or solvents.
- Battery Care: To prolong battery life, avoid overcharging or completely draining the battery. Store the radio and battery in a cool, dry place when not in use for extended periods.
- Antenna: Ensure the antenna is securely attached. Do not operate the radio without an antenna, as this can damage the device.
- Storage: Store the radio in a dry environment, away from extreme temperatures and direct sunlight.
- Software Updates: The radio supports remote updates. Periodically check for and apply software updates to ensure optimal performance and access to new features.
8. Troubleshooting
If you encounter issues with your G6000 radio, please refer to the following common problems and solutions:
- Radio does not power on:
- Ensure the battery is correctly installed and fully charged.
- Check if the battery contacts are clean.
- No signal/Poor reception:
- Verify the antenna is securely attached.
- Check your SIM card for proper installation and active network service.
- Move to an area with better network coverage (for 4G LTE PTT) or clear line-of-sight (for UHF).
- Cannot transmit/receive (PTT):
- Ensure you are in the correct operating mode (IP Radio PTT or UHF Radio PTT).
- Check if the volume is turned up.
- Confirm that your SIM card has an active data plan for IP PTT.
- GPS not working:
- Ensure you are in an open outdoor area with a clear view of the sky.
- Check GPS settings in the radio's menu.
- Keyboard unresponsive:
- Press and hold the Keyboard Lock/Unlock button for 2 seconds to unlock the keyboard.
- If the issue persists, try restarting the device.
9. User Tips
- For optimal 4G LTE PTT performance, ensure your SIM card has a stable data connection.
- Utilize the GPS tracking feature for enhanced safety and coordination in team operations.
- Regularly check the battery level, especially before critical missions, to avoid unexpected power loss.
- Experiment with both IP Radio and UHF modes to understand their strengths in different environments.
10. Frequently Asked Questions
- Q: What is the audio quality of the G6000?
- A: The G6000 offers selectable audio quality of 4K or 8K.
- Q: Does the G6000 support GPS tracking?
- A: Yes, the G6000 features GPS Location and Tracking capabilities.
- Q: Can I use a standard SIM card with this radio?
- A: Yes, the G6000 uses a standard size SIM card.
- Q: What is the battery capacity?
- A: The radio is equipped with a 6000mAh Li-ion battery.
- Q: How many channels does the UHF radio have?
- A: The UHF section of the radio has 128 storage channels.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer, ANYSECU. Ensure you have your product model (G6000) and any purchase details available when contacting support.
Manufacturer: Shenzhen Anysecu Technology Co., Ltd.