1. Introduction
This manual provides instructions for the UGREEN 6-Port PoE Gigabit Ethernet Switch (Model: CM741-35371). This device is designed to provide efficient power delivery and seamless network connectivity for various devices such as IP cameras, IP phones, access points, laptops, and routers. It features intelligent power management, flexible operating modes, and a durable design for reliable performance.
2. Setup Instructions
The UGREEN 6-Port PoE Gigabit Ethernet Switch is designed for plug-and-play operation, requiring minimal configuration.
2.1. Package Contents:
- UGREEN 6-Port PoE Gigabit Ethernet Switch
- Power Adapter
- User Manual
2.2. Connecting Your Device:
- Power Connection: Connect the power adapter to the switch's power socket and then to a power outlet.
- Uplink Connection: Connect your router or main network device to one of the two Gigabit uplink ports (ports 5 or 6) using a standard Ethernet cable. These ports provide extra convenience for connecting to your main network.
- Device Connections: Connect your PoE-compatible devices (e.g., IP cameras, IP phones, wireless access points) to the 4 PoE+ Gigabit ports (ports 1-4). For non-PoE devices (e.g., laptops, desktops, NAS), you can also use these ports, and the switch will automatically detect and supply data only.
2.3. Mounting Options:
The switch supports both desktop placement and wall mounting for flexible installation. Ensure proper ventilation regardless of placement.
3. Operating Modes and Features
3.1. One-Touch Mode Selection:
The switch features a physical switch on the side to select between three operating modes:
- Standard Mode: Provides Gigabit auto-negotiation, compatible with IEEE 802.3af/at standards. All ports operate normally, offering high-speed, low-latency connectivity for real-time monitoring and efficient connections.
- VLAN Mode: Ports 1-4 are isolated from each other but can communicate with uplink ports 5-6. This enhances network control and prevents broadcast storms, ideal for security and surveillance networks.
- Extended Mode: Supports PoE transmission up to 820 feet (250 meters). This mode is ideal for security and remote network coverage where devices are far from the switch. Note: When Extend mode is enabled, the speed will drop to 10Mbps.
3.2. Intelligent Power Management:
The switch incorporates advanced power management features to ensure stable and safe operation:
- Overload Prevention: If the total PoE power usage exceeds 60W, the switch automatically shuts down ports in a priority order (from port 4 down to port 1) to prevent overload and protect connected devices.
- Auto PoE Detection: The switch automatically detects whether a connected device is PoE-compatible. It supplies power only to PoE devices and transmits data only to non-PoE devices, preventing damage to non-PoE equipment.
- Short-circuit Protection: If a device connected to a PoE port experiences a short-circuit, the switch cuts power to that specific port while other ports remain active, ensuring network stability.
3.3. Indicator Lights:
The indicator lights on the front panel provide real-time status of the switch and connected ports:
- Power Indicator: Illuminates when the switch is powered on.
- PoE/Link/Activity Indicators (Ports 1-4):
- Solid light: Indicates a stable network link.
- Flashing light: Indicates data activity.
- Specific color/state for PoE power delivery (refer to product for exact color coding, typically green for PoE active).
- Link/Activity Indicators (Ports 5-6):
- Solid light: Indicates a stable network link.
- Flashing light: Indicates data activity.
4. Maintenance
To ensure optimal performance and longevity of your UGREEN PoE Switch, follow these maintenance guidelines:
- Cleaning: Regularly wipe the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners.
- Ventilation: Ensure the switch is placed in a well-ventilated area. The metal casing with an enlarged grille is designed for efficient heat dissipation, but obstructions can hinder this.
- Cable Management: Keep network cables organized and free from kinks or excessive bends to prevent signal degradation.
- Environmental Conditions: Avoid exposing the switch to extreme temperatures, high humidity, or direct sunlight.
5. Troubleshooting
If you encounter issues with your UGREEN PoE Switch, refer to the following common troubleshooting steps:
5.1. No Power:
- Ensure the power adapter is securely connected to both the switch and a working power outlet.
- Check if the power outlet is functional by plugging in another device.
5.2. No Network Connectivity:
- Verify that all Ethernet cables are securely plugged into both the switch and the connected devices.
- Check the Link/Activity indicator lights for the respective ports. A solid light indicates a connection, while flashing indicates data transfer. No light suggests a cable or device issue.
- Ensure your router or main network device is functioning correctly and connected to an uplink port (5 or 6).
- If in VLAN mode, remember that ports 1-4 are isolated from each other; ensure communication is intended via uplink ports.
5.3. PoE Device Not Receiving Power:
- Confirm that the device connected is PoE-compatible (IEEE 802.3at/af).
- Check the PoE indicator light for the specific port.
- If multiple PoE devices are connected, ensure the total power consumption does not exceed the 60W budget. The switch's intelligent power management will shut down lower-priority ports (4-1) if overloaded. Try disconnecting some devices to see if power is restored.
- If a short-circuit is detected, the port will be shut down. Disconnect the device, check for faults, and reconnect.
5.4. Slow Network Speed in Extended Mode:
- This is normal behavior. In Extended mode, the transmission speed drops to 10Mbps to achieve longer transmission distances (up to 820FT). If high speed is required, switch back to Standard or VLAN mode.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | UGREEN |
| Model Number | CM741-35371 |
| Product Name | Ethernet Splitter (6-Port PoE Gigabit Ethernet Switch) |
| Color | Space Gray |
| Material | Aluminum Shell |
| Interface Type | RJ45 |
| Ports | 6 (4 PoE+ Gigabit, 2 Gigabit Uplink) |
| PoE Standard | IEEE 802.3at/af |
| Max PoE Power per Port | 30W |
| Total PoE Power Budget | 60W |
| Transmission Rate | 10/100/1000Mbps (Gigabit) |
| Extended Mode Range | Up to 820FT (250 meters) at 10Mbps |
| Protection | 6KV Lightning Protection |
| Compatible Devices | Cameras, Desktops, Gaming Consoles, Laptops, Routers, IP Phones, Access Points, NAS |
| Certification | CE |
| Origin | Mainland China (Guangdong) |
| Product Status | Stock |
| Package Dimensions (L x W x H) | 25 cm x 12 cm x 8 cm |
| Package Weight | 1.0 kg |
7. User Tips
- For optimal performance with high-bandwidth devices, ensure the switch is in Standard or VLAN mode, as Extended mode reduces speed to 10Mbps.
- When planning your network, consider the 60W total PoE budget. If you have many high-power PoE devices, you might need to distribute them across multiple switches or use devices with lower power requirements.
- Utilize the VLAN mode for enhanced security in surveillance setups, as it isolates camera traffic from other network segments.
- The metal casing helps with heat dissipation, but avoid stacking other devices on top of the switch to maintain airflow.
8. Warranty and Support
8.1. After-sale Service:
We are committed to providing excellent after-sales services. Any issues you report will receive a response within 24 hours and concrete action within 48 hours.
8.2. Warranty Policy:
The product comes with a warranty, subject to the following conditions:
- Excludes damage caused by human factors.
- Excludes damage resulting from improper operation.
- Excludes products that cannot be resold due to physical damage or alteration.
- Please check the quality of the products before using them and inform us immediately if any defects are found.
- Subject to the above exclusions, defective products will be replaced within the guarantee period.
8.3. Contact Support:
For technical support, warranty claims, or any other inquiries, please contact UGREEN customer service through the official website or your point of purchase. Please have your model number (CM741-35371) and purchase details ready.