LIXADA RC Fishing Bait Boat User Manual

1. Introduction

Thank you for choosing the LIXADA RC Fishing Bait Boat. This remote-controlled bait boat is designed to enhance your fishing experience by providing precise bait delivery and advanced navigation features. With its robust design, long-range control, and intelligent systems, it's an indispensable tool for modern anglers. Please read this manual thoroughly before operating the device to ensure safe and optimal performance.

Figure 1: LIXADA RC Fishing Bait Boat and Remote Control

2. Features

• Large Capacity Battery: Equipped with a 12V 20000mAh rechargeable battery, offering 2-4 hours of continuous operation.
• Built-in Intelligent Return System: Allows one-button return to the starting point and automatic return upon low battery, remote signal loss, or exceeding safety limits.
• Water Cooling System: Efficiently cools the motor during high-speed use to ensure longevity and consistent performance.
• 4.3-inch Clear Display Remote Controller: Provides real-time data including distance, boat position, battery level, bait dispensing status, direction, and signal strength for clear visibility and easy control.
• 800m Remote Control Range: Utilizes a 2.4G control frequency for a stable signal and extended operational distance.
• 180 Fishing Points: Features 9 programmable fishing locations, each capable of storing 20 positioning points, adaptable to various fishing environments.
• Dual High-Power Propulsion Units: Equipped with 550 brushed motors and a gyroscope balance system to minimize course deviation and ensure stable navigation.
• Bait Dispensing: Separable bait compartments allow simultaneous loading and dispensing of two different bait types, with a total load capacity of 3kg (6.6lbs).
• Fish Net Solenoid Valve: Supports portable net mounting and a one-click net release mechanism for efficient fishing.

Figure 2: Dual High-Power Propulsion Units

Figure 3: Bait Dispensing Demonstration

Figure 4: Fish Net Solenoid Valve

3. Specifications

Item Type:

Fishing Bait Boat

Material:

ABS

Bait Tank Load Capacity:

3kg / 6.6lbs

Bait Boat Battery:

12V 20000mAh rechargeable battery

Remote Control Battery:

3.7V 2400mAh lithium battery (built-in)

Remote Control Frequency:

2.4G

Remote Control Distance:

Up to 800 meters

Charging Time:

Approximately 12 hours

Working Time:

2-4 hours (depending on usage)

Bait Boat Size:

Approx. 54.8 x 27.5 x 27.7cm / 21.6 x 10.8 x 10.9in

Bait Boat Weight:

Approx. 3606g / 127.3oz

Figure 5: High-Capacity Battery

4. Package Contents

The package may vary slightly depending on the specific variant purchased (e.g., with or without fish finder). Please check your packaging for exact contents.

Standard Package:

• 1 x Bait Boat
• 1 x Bait Boat Battery (12V 20000mAh)
• 1 x Bait Boat Battery Charging Cable
• 1 x Remote Controller
• 1 x Remote Control Charging Cable
• 2 x Eyebolts
• 2 x Remote Control Joystick Caps
• 1 x Lanyard
• 2 x Propeller Blades
• 1 x Antenna
• 1 x European Standard Charger
• 2 x Propeller Sleeves
• 1 x Bait Boat Bag
• 1 x Bait Boat Manual
• 1 x Bait Tank Partition Board

Optional Fish Finder Package (in addition to standard items):

• 1 x Fish Finder Probe
• 1 x Fish Finder Antenna
• 1 x Probe Charging Cable
• 1 x Fish Finder Display
• 1 x Fish Finder Display Lanyard
• 1 x Fish Finder Stand
• 1 x Fish Finder Stand Tow Rope
• 1 x Fish Finder Manual

5. Setup

1. Charge Batteries: Fully charge the bait boat battery (12V 20000mAh) and the remote control's built-in 3.7V 2400mAh lithium battery using the provided charging cables and charger. The bait boat charging time is approximately 12 hours.
2. Install Propellers: Attach the propeller blades to the motors at the rear of the boat. Ensure they are securely fastened.
3. Install Antenna: Screw the antenna onto the designated port on the bait boat.
4. Install Remote Control Joystick Caps: Place the joystick caps onto the remote control's joysticks for comfortable operation.
5. Attach Lanyard: Secure the lanyard to the remote control for added safety and convenience.
6. Insert Bait Tank Partition Board: If you plan to use two different types of bait, insert the partition board into the bait tank to create separate compartments.
7. Fish Finder Setup (if included):
   • Attach the fish finder probe to the boat using the eyebolts or designated mounting points.
   • Connect the fish finder antenna to the fish finder display unit.
   • Mount the fish finder display on the remote control stand or a suitable location for easy viewing.
   • Charge the fish finder probe and display if they have separate batteries.
8. Initial Calibration: Refer to the remote control diagram (Figure 6) and use the 'Calibration' button to perform initial setup as instructed in the dedicated bait boat manual.

Figure 6: Bait Boat Overview

6. Operating Instructions

6.1 Remote Control Functions

Familiarize yourself with the remote control layout (Figure 7) before operation:

Figure 7: Remote Control Buttons

• Speed Adjustment Knob: Adjusts the boat's speed.
• Left/Right Bait Tank: Buttons to release bait from the respective compartments.
• Left/Right Hook: Buttons to release fishing hooks.
• Lights / Cruise Control: Toggles navigation lights and activates/deactivates cruise control.
• Left/Right Motor: Controls the individual motors for steering.
• Calibration: Initiates boat calibration sequence.
• Fishing Ground / Starting Point / Clear / Cancel: Buttons for GPS functions and clearing settings.
• Directional Buttons (Up, Down, Left, Right, OK, Confirm): Used for menu navigation and precise boat control.

6.2 Basic Operation

1. Power On: Turn on the remote control, then power on the bait boat. Wait for the devices to establish a connection.
2. Load Bait: Open the bait tank covers and load your desired bait (up to 3kg total). Close the covers securely.
3. Launch Boat: Carefully place the bait boat into the water.
4. Navigate: Use the joysticks and speed adjustment knob on the remote control to navigate the boat to your desired fishing spot. The 4.3-inch display will show real-time information.
5. Dispense Bait: Once at the desired location, press the 'Left Bait Tank' or 'Right Bait Tank' button to release the bait.
6. Return Boat: Use the joysticks to manually guide the boat back, or activate the 'Intelligent Return System' by pressing the designated button (refer to your specific remote control manual for exact button). The boat will automatically return to its starting point.

6.3 Advanced Functions (GPS & Fishing Points)

Figure 8: Fishing Spot Mode (GPS)

1. Set Fishing Points: Navigate the boat to a desired fishing location. Use the remote control's menu to save this as a fishing point. The boat can store up to 9 fishing locations, each with 20 positioning points.
2. Navigate to Saved Points: Select a saved fishing point from the remote control's menu, and the boat will autonomously navigate to that location.
3. Intelligent Return: The boat will automatically return to the set starting point if the battery is low, the remote signal is lost, or if it exceeds predefined safety limits.

6.4 Fish Net Solenoid Valve (if applicable)

If your model includes the fish net solenoid valve, you can attach a fishing net to the rear mechanism. Use the designated 'Net Release' button on the remote control to deploy the net with a single click.

Figure 9: Bait Boat in water with Fish Finder Probe

7. Maintenance

• Cleaning: After each use, especially in saltwater, rinse the boat thoroughly with fresh water to remove any salt, dirt, or debris. Ensure all compartments are dry before storage.
• Battery Care:
  • Always fully charge batteries before storage if storing for extended periods.
  • Do not overcharge or completely drain the batteries.
  • Store batteries in a cool, dry place away from direct sunlight.
• Propeller Inspection: Regularly check the propellers for any fishing lines, weeds, or damage. Clean them as needed to ensure smooth operation.
• General Inspection: Periodically inspect the boat for any signs of wear, cracks, or loose components. Address any issues promptly to prevent further damage.
• Water Cooling System: The water cooling system is automatic. Ensure the water intake and outlet ports are clear of obstructions.

8. Troubleshooting

9. User Tips

• Pre-plan Fishing Spots: Utilize the 180 fishing points feature to pre-program your favorite or most productive spots, saving time during your fishing trip.
• Monitor Battery Levels: Always keep an eye on the battery indicators on the remote control display to avoid unexpected power loss far from shore.
• Practice in Calm Waters: Before using in challenging conditions, practice navigating and dispensing bait in calm, open water to get a feel for the controls.
• Secure Bait Tank Covers: Ensure bait tank covers are firmly closed before launching to prevent accidental bait release or water ingress.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the manufacturer. Keep your purchase receipt as proof of purchase.