Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your GAQQEE Adjustable Frequency Schumann Wave Sine Wave Signal Generator. Please read this manual carefully before use to ensure optimal performance and longevity of your device.
Product Features
- Wide adjustable frequency range (0.1Hz–99999Hz) precisely meets diverse requirements.
- Dual-channel output supports external antenna boards for multi-device serial expansion.
- Default frequency of 7.83Hz with one-touch frequency setting for simple, convenient operation.
- Button-operated design ensures straightforward, stress-free handling even for novices.
- Host unit supports connection to up to 10 antenna mainboards, suitable for diverse application scenarios.
Specifications & Parameters (Mainboard)
| Parameter | Value |
|---|---|
| Antenna Waveform | Sine wave |
| Power Interface | Android interface (Micro USB) |
| Supply Voltage | DC 5V |
| Rated Power Consumption | <1W |
| Default Frequency | 7.83Hz |
| Adjustment Range | 0.1Hz-99999Hz |
| Sine wave voltage amplitude | 3V |
| Square wave voltage amplitude | 5V |
| Main unit dimensions (with casing) | 15.8 × 10.9 × 2cm |
| External antenna board dimensions | 10 × 10cm |
| Certifications | CE, RoHS |
Figure: Dimensions of the Schumann Wave Signal Generator main unit.
Figure: Dimensions of the external antenna board.
Setup and Operation
Operation Method:
Power on the device using a mobile phone charger plug with an Android data cable (Micro USB). The frequency will default to 7.83Hz upon boot. To adjust the frequency, directly input the desired frequency via the keypad and press the “OK” button to confirm.
For example: To set the frequency to 888Hz, after powering on, input the digits [8][8][8] on the keypad and then press the [OK] button. The device will display "Loading..." and then the new frequency.
Figure: Labeled components and basic operation instructions.
Video: Demonstrating power-on, frequency adjustment, and external antenna connection.
External Antenna Usage
To use an external antenna, insert one end of the AUX audio cable into any headphone jack on the main unit. Connect the other end to the headphone port on the external antenna board. Ensure the cable is fully inserted for proper operation.
The headphone ports support daisy-chain configuration, allowing multiple external antenna units to be used concurrently. Connect AUX audio cables to the corresponding headphone ports on each device to achieve multi-unit daisy-chain operation. A single main unit can accommodate up to 10 antenna boards.
Figure: Overview of the main unit and external antenna connections.
Figure: Detailed diagram for connecting the external antenna and headphones.
Figure: Illustration of how multiple external antenna boards can be clustered.
Product Listing
Set One:
- 1x Schumann Wave Signal Generator Main Unit
- 1x Power Cable
Set Two:
- 1x Extension Antenna Board
- 1x AUX Audio Cable
Set Three:
- 1x Schumann Wave Signal Generator Main Unit
- 1x Power Cable
- 1x Extension Antenna Board
- 1x AUX Audio Cable
- 1x Headphones
User Tips
- Always ensure the AUX audio cable is fully inserted into both the main unit and external antenna board for stable signal transmission.
- When cascading multiple external antennas, ensure all connections are secure to maintain signal integrity.
- The device is designed for simple operation; if you encounter issues, double-check power and cable connections before troubleshooting further.
Troubleshooting
No Power/Display:
- Ensure the Micro USB power cable is securely connected to both the device and a 5V power source.
- Verify that the power source (e.g., phone charger) is functional.
Incorrect Frequency Output:
- Re-enter the desired frequency using the keypad and press 'OK' to confirm.
- Ensure you are inputting valid numerical values within the 0.1Hz-99999Hz range.
External Antenna Not Working:
- Check that the AUX audio cable is fully inserted into both the main unit's headphone jack and the external antenna board's headphone port.
- If using multiple antennas in series, ensure each connection is firm.
Maintenance
- Keep the device in a dry environment and avoid exposure to moisture or extreme temperatures.
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Avoid dropping or subjecting the device to strong impacts.
Warranty and Support
For any issues not covered in this manual or for warranty inquiries, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact information.
A detailed user manual in PDF format is also available for download from the product page or by contacting support.
