Jingsha B75M-I

Contents

Jingsha B75M-I Mini-ITX Motherboard Set User Manual

Model: B75M-I | Brand: Jingsha

1. Warning & Safety Information

  • Do not use in humid environments.
  • Avoid areas with strong electromagnetic interference.
  • Disconnect power before installation.
  • When inserting or removing hardware, take care not to damage motherboard pins.
  • Prevent electrostatic discharge (ESD) damage during installation.
  • Do not force insertion or removal of hardware components.
  • Ensure adequate ventilation and heat dissipation.

2. Package Contents

The Jingsha B75M-I Motherboard Set includes the following components:

  • 1 * B75M-I Motherboard
  • 1 * Intel Core i3 2130 CPU
  • 1 * DDR3 8GB 1600MHz PC RAM
  • 1 * SATA Cable
  • 1 * Backplane (I/O Shield)

Note: Comprehensive testing is performed before shipment.

Jingsha B75M-I Motherboard Set with Core i3 2130 CPU and 8GB DDR3 RAM

Figure 2.1: Jingsha B75M-I Motherboard Set with included CPU and RAM.

Top-down view of the Jingsha B75M-I Motherboard

Figure 2.2: Top-down view of the Jingsha B75M-I Motherboard.

3. Installation Instructions

Follow these steps to install the CPU, memory, and connect power cables.

3.1 CPU Installation

  1. Press the wire buckle on the LGA 1155 socket by hand and lift it up. Remember not to remove the black cover before installing the CPU.
  2. The motherboard base has three bayonets (red circles in the figure), and the CPU itself has three bayonets. Align them one by one, and then put them all down.
  3. Lower the wire buckle that was lifted up, and the black cover on it will pop up automatically. Remember not to remove the black cover before installing the CPU.

Precautions:

  • Do not open the CPU top cover.
  • Do not touch the CPU pins to contact the core.
  • Do not touch the motherboard interface pins.
Diagram illustrating CPU installation steps and precautions

Figure 3.1: Detailed CPU installation steps and important precautions.

3.2 Memory Installation

  1. Locate the two DDR3 memory slots on the motherboard.
  2. Align the notch on the DDR3 RAM module with the key in the memory slot.
  3. Insert the memory module firmly into the slot until the retention clips on both sides snap into place.
DDR3 8GB 1600MHz PC RAM module

Figure 3.2: DDR3 8GB 1600MHz PC RAM module.

3.3 Power Connections

  1. Connect the 24-pin ATX main power connector from your power supply to the corresponding slot on the motherboard.
  2. Connect the 8-pin ATX_12V power connector (CPU power) to the designated slot near the CPU socket.
  3. Connect any necessary SATA power cables to your storage devices (HDD/SSD).
  4. Ensure all power cables are securely seated before powering on the computer.

4. Product Specifications

Detailed specifications for the B75M-I Motherboard Set:

Product Specifications table for the B75M-I Motherboard

Figure 4.1: Product Specifications table.

B75M-I Motherboard Specifications
Component Detail
Part B75M-I Motherboard
Processor Intel Socket LGA1155 CPU (Intel Core i3 2130 included)
CPU Main Frequency 3.4GHz (i3 2130)
CPU Cores/Threads 2 Cores / 2 Threads (i3 2130)
CPU L3 Cache 3MB (i3 2130)
CPU Technology 32nm (i3 2130)
CPU Power Consumption 65W (i3 2130)
Chipset Intel PCH B75
Memory 2*UDIMM DDR3 1066/1333/1600MHz (Base on CPU), Dual channel, Up to 16GB (8GB 1600MHz included)
Storage 1*SATA3.0 Port, 3*SATA2.0 Ports, 1*M.2 2280 NVMe x4 2.0 or 1*M.2 2280 NGFF SATA2.0 Protocol SSD Port, 1*M.2 WIFI
USB 6*USB2.0 Ports, 4*USB3.0 Ports
LAN 1*RTL8111F, 1000Mbps Ethernet
Audio CJC6811A
BIOS AMI EFI BIOS
Back Panel Connectors 1*HD, 1*VGA, 4*USB2.0 Port, 2*USB3.0 Port, 1*RJ45 LAN Port, 1*Audio
Other Onboard Connectors 1*4pin CPU Smart FAN header, 1*3pin SYS FAN header, 1*Front Audio header, 1*USB2.0 header (for two USB2.0 ports), 1*USB3.0 header (for two USB3.0 ports), 1*Front control panel header, 1*Speaker header, 1*CMOS header, 1*Power on header, 1*COM header, 1*Debug header, 1*M.2 WIFI, 1*24pin ATX connector, 1*8pin 12V connector
Expansion Slot 1*PCI-E 3.0 x16 slot, 1*PCI-E 1X
Form Factor Mini-ITX (170mm x 170mm)
Jingsha B75M-I Motherboard with dimensions (170mm x 170mm)

Figure 4.2: B75M-I Motherboard dimensions.

5. Feature Overview

The Jingsha B75M-I motherboard offers a compact design with robust features for various computing needs:

  • LGA1155 Socket Support: Compatible with Intel processors using the LGA1155 socket, including the included Core i3 2130.
  • DDR3 Memory: Features two DDR3 memory slots, supporting up to 16GB of 1.5V standard-voltage, non-ECC desktop memory at speeds up to 1600MHz.
  • Storage Options: Includes multiple SATA ports (1x SATA 3.0, 3x SATA 2.0) and versatile M.2 slots for NVMe x4 2.0 or NGFF SATA2.0 SSDs, plus an M.2 slot for WiFi.
  • Expansion: Equipped with a PCI-E 3.0 x16 slot for graphics cards and a PCI-E 1X slot for other expansion cards.
  • Connectivity: Provides a Gigabit Ethernet port (RTL8111F), multiple USB 2.0 and USB 3.0 ports, and various onboard headers for front panel connectivity.
  • Integrated Graphics Output: Features HD and VGA display outputs for integrated graphics.
  • Quality Components: Utilizes solid-state capacitors, a multi-layer PCB for stability, and an aluminum heatsink for enhanced thermal performance.
B75M-I Motherboard layout diagram with labeled components (CPU_FAN, Power Supply, SATA, USB, etc.)

Figure 5.1: B75M-I Motherboard layout with key components labeled.

Detailed features of the B75M-I motherboard, including DDR3 memory slots, M.2 NVMe/NGFF, LGA1155 CPU support, heat resistance, Gigabit network, and PCIe 3.0 x16 slot

Figure 5.2: Visual overview of key motherboard features.

Back I/O Ports diagram with labels for USB, HD, VGA, Ethernet, and Audio

Figure 5.3: Back I/O Ports diagram.

Note: The old and new versions of the motherboard may be shipped randomly. One capacitor may be removed from newer versions as it has no functional impact. Memory module colors (black/green) may also vary by batch.

Image showing two versions of the B75M-I motherboard, noting random shipment and a removed capacitor

Figure 5.4: Motherboard version variations.

6. Troubleshooting (FAQ)

Q: System fails to power on?
A: Verify that all power connections (24-pin ATX, 8-pin ATX_12V) are secure, and that the CPU and memory are properly installed.
Q: Experiencing Blue Screen of Death (BSOD)?
A: Update the motherboard BIOS to the latest version. Also, verify hardware compatibility for all installed components, especially RAM and CPU.
Q: Hard drive not recognized?
A: Confirm that the SATA data and power cables are correctly connected to both the hard drive and the motherboard. Check BIOS settings to ensure SATA ports are enabled.

7. User Tips

  • Power Supply: This platform requires a powerful power supply. Ensure your power supply is at least 500W and from a reputable brand to adequately support all components.
  • CR2032 Battery: The CR2032 battery (CMOS battery) is removed before shipping due to international shipping regulations. You will need to install one upon receiving the motherboard.
  • CPU Warranty Label: A warranty label is placed on the back of the CPU. Do not tear it off, as it is required for warranty claims. Its placement does not affect CPU functionality.
Image showing a CPU with a warranty label on the back

Figure 7.1: CPU with warranty label.

8. Warranty and Support

The included CPU and RAM come with a 1-year warranty from the seller. For any issues or support, please refer to the seller's contact information.

For a more detailed user manual and additional documentation, please refer to the official PDF guide:

View User Manual (PDF)

© 2023 Jingsha. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.