1. Introduction
This manual provides detailed instructions for the Panda Wireless LTE 4G Core Boards, including models from the SIM7670, SIM7672, A7670, A7672, A7676, SIM7070, and SIM7000 series. These core boards are designed to simplify IoT development by offering robust LTE CAT1, 4G, 2G, Bluetooth (BT), and Global Navigation Satellite System (GNSS) capabilities (GNSS is optional depending on the model). They are suitable for a wide range of applications from industrial control to vehicle interconnection.
The boards feature strong compatibility, wide voltage support (5-16V DC), and come with abundant reference materials and technical support to facilitate your design process.
2. Setup
2.1 Package Contents
Depending on your selected option, your package may include:
- LTE 4G Core Board (e.g., SIM7670G, SIM7672E, A7670E, etc.)
- FPC Antenna (optional)
- FPC GPS Antenna (optional, for models with GNSS support)
2.2 Board Layout and Components
2.3 Initial Setup
- Insert SIM Card: Locate the MIRCO SIM card slot on the board (refer to Figure 3). Gently insert your MIRCO SIM card into the slot until it clicks into place.
- Connect Antenna: If your board option includes an FPC Antenna or FPC GPS Antenna, connect it to the IPEX 1 antenna interface on the board. Ensure a secure connection. Refer to Figure 3 for the antenna interface location.
- Power Supply: The board supports a USB 5-16V DC power supply. Connect a compatible power source to the Micro USB port or use the designated power pins (VCC, GND) on the board.
- UART Connection: For communication with a host microcontroller or computer, connect the UART pins (TX, RX) to your desired interface. The default UART TTL level is 3.3-4.3V.
- USB Connection: The Micro USB port can be used for power, data communication, and debugging.
3. Operating Instructions
3.1 Powering On and LED Indicators
Once powered, the board's LED indicators will provide status information. The Power/Network light indicates the module's operational status and network connectivity.
3.2 Communication Interfaces
- UART: The primary interface for sending AT commands to control the module and receive data.
- USB: Can be used for power, data transfer, and potentially for firmware updates or debugging, depending on the specific module.
3.3 Network Protocols and Functions
The core boards support a range of network protocols and functions, including:
- TCP/IP, IPV4/IPV6, MultiPDP, FTP/FTPS, HTTP/HTTPS
- TPS/DNS/RNDIS/ECM/PPP
- LTE CAT1, 4G, 2G, Bluetooth, and GNSS (Global Navigation Satellite System) for positioning (GNSS is model-dependent).
Refer to the specific module's datasheet for detailed AT command sets and programming guides.
4. Specifications
The following table summarizes the general specifications. Specific details may vary by model. Please refer to the individual model's datasheet for precise information.
| Project | Description |
|---|---|
| Product Name | 4G CAT1 Core Board / LPWA Core Board |
| Model | CC-MCORE-A7672G-LABE, CC-MCORE-SIM7670E, CC-MCORE-A7670E-LASE, CC-MCORE-A7676E, CC-MCORE-SIM7000A, CC-MCORE-A7672SA-FASE, DD-MCORE-SIM7672NA, CC-MCORE-SIM7672E, CC-MCORE-SIM7672G, CC-MCORE-SIM7070E, CC-MCORE-SIM7000E, CC-MCORE-SIM7070G, CC-MCORE-A7670SA-FASE, CC-MCORE-A7672E-LASE, CC-MCORE-A7672SA-LASE, CC-MCORE-A7670G-LABE, DD-MCORE-SIM7670NA (and others) |
| Package | 23PIN (2.54mm) / 7PIN (2.54mm) |
| Power | USB 5-16V DC |
| UART | 3.3-4.3V TTL (Default) |
| Antenna interface | IPEX 1 |
| SIM Card | MIRCO SIM |
| LED | Power/Network light |
| USB | Y |
| SIZE | 44.45*31.75*12.44 (Including pin height) |
| Operating temperature | -40°C - 85°C |
| Network Band | Varies by model (e.g., LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66, LTE-TDD: B38/B39/B40/B41, Cat-M, Cat-NB, GSM/GPRS/EDGE) |
| Network speed | LTE:10Mbps(DL) 5Mbps(UL), GPRS: 85.6Kbps, Cat-M(Kbps) 300(DL)/375(UL), Cat-NB(Kbps) 34(DL)/66(UL) (Varies by model) |
| Network protocol | TCP/IP/IPV4/IPV6/MultiPDP/FTP/FTPS/HTTP/HTTPS/DNS/RNDIS/ECM/PPP, DTLS/PING/LWM2M/COAP/MQTT |
| Function | LTE CAT1+4G+2G (+BT+GNSS/Qualcomm chip, varies by model) |
5. Maintenance
To ensure the longevity and optimal performance of your LTE 4G Core Board, follow these maintenance guidelines:
- Handle with Care: Electronic components are sensitive. Avoid dropping the board or subjecting it to physical shock.
- Keep Dry: Protect the board from moisture and humidity. Operate it in a dry environment.
- Cleanliness: Keep the board free from dust and debris. Use a soft, dry brush or compressed air for cleaning. Do not use liquids or solvents.
- Temperature: Operate the board within its specified operating temperature range (-40°C to 85°C) to prevent damage.
- Power Supply: Always use a stable and appropriate power supply (USB 5-16V DC) to avoid voltage fluctuations that could harm the module.
6. Troubleshooting
If you encounter issues with your LTE 4G Core Board, consider the following troubleshooting steps:
- No Power: Ensure the power supply is correctly connected and providing the specified voltage (5-16V DC). Check the power LED indicator.
- No Network Connectivity:
- Verify that the SIM card is correctly inserted and active.
- Ensure the antenna is securely connected to the IPEX 1 interface.
- Check the network LED indicator for status.
- Confirm that the module's network bands are compatible with your local cellular network.
- Communication Issues (UART/USB):
- Check your wiring connections for UART (TX/RX) and USB.
- Verify that the baud rate and other serial port settings match your host device.
- Ensure the correct drivers are installed for USB communication.
- GNSS (GPS) Issues:
- Ensure you are using a board model that supports GNSS.
- Connect a compatible FPC GPS Antenna.
- Ensure the module has a clear view of the sky for satellite reception.
If problems persist, consult the module's specific datasheet or contact technical support.
7. User Tips
- Documentation: Always refer to the official datasheets and AT command manuals for your specific module variant for in-depth technical details and programming instructions.
- Power Management: For battery-powered applications, optimize power consumption by utilizing the module's low-power modes.
- Antenna Placement: Proper antenna placement is crucial for good signal strength and GNSS performance. Avoid placing antennas near metal objects or other RF interference sources.
- Development Kits: Consider using official development kits or breakout boards for easier prototyping and access to all module functionalities.
8. Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact Panda Wireless directly. Ensure you retain your proof of purchase for any warranty claims.