1. Introduction
The Twotrees TTC-H80 is a high-quality CNC Router Machine designed for precision wood carving and engraving. This multifunctional machine is equipped with an 800W spindle, offering versatile capabilities for various materials including wood, acrylic, soft aluminum, and plastics. This manual provides essential information for the safe and effective setup, operation, and maintenance of your TTC-H80 CNC Router Machine.

2. Safety Precautions
Always prioritize safety when operating the CNC Router Machine. Failure to follow safety guidelines can result in injury or damage to the equipment.
- Ensure the work area is clean, well-lit, and free from obstructions.
- Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and gloves.
- Keep hands and loose clothing away from moving parts and the spindle during operation.
- Never leave the machine unattended while it is running.
- Familiarize yourself with the Emergency Stop button location and function.
- Ensure proper ventilation when working with materials that produce dust or fumes.
- Disconnect power before performing any maintenance or adjustments.

3. Main Components
The TTC-H80 CNC Router Machine is constructed from high-quality materials for durability and precision.
- Body Material: Aluminum Alloy and Stainless Steel Rods
- Shell Material: Aluminum
- Main Components: Motor, Bearings, C7 Ball Screws, Linear Guide Rails
- Spindle: 500W or 800W spindle (depending on configuration)
- Control Box: External control unit with a 3.5-inch touch color screen.
- Work Table: Durable aluminum T-shaped track extrusions supporting MDF density boards.

4. Setup and Assembly
The TTC-H80 features a linear guide transmission design with ball screws on the XYZ axes, enhancing accuracy. The XYZ transmission profile is sealed to protect against dust and debris.
4.1 Unpacking and Inspection
- Carefully unpack all components from the packaging.
- Verify that all parts listed in the packing list are present and undamaged.
- Report any missing or damaged parts to the seller immediately.
4.2 Assembly
Follow the detailed assembly instructions provided in the separate assembly guide. Key points include:
- Assemble the main frame, ensuring all connections are secure.
- Install the C7 ball screws and linear guide rails for the XYZ axes.
- Mount the spindle and connect it to the control system.
- Attach the aluminum T-shaped track extrusions and MDF density boards to form the work table.
4.3 Installation Dimensions
The installation dimensions for the TTC-H80 are approximately 2262.2mm x 1238mm (89.1in x 48.7in). Ensure you have adequate space for both the machine and safe operation.

5. Operation
The TTC-H80 offers one-click control and a smart touch screen for simplified operations.
5.1 Control Interface
The machine features a 3.5-inch touch color screen for intuitive control. You can switch between CNC engraving and laser engraving modes with a single step. The engraving mode interface provides options for WiFi connection, USB connection, help, contact, tool settings, and file management.

5.2 Software Compatibility
The TTC-H80 is compatible with mainstream design software, ensuring worry-free collaboration for your projects. Supported software includes Carveco Maker, Artcam (G-Code), Easel, and Fusion360.

5.3 Supported Materials and Engraving
The machine can carve a wide range of materials, including plywood, density board, solid wood board, acrylic, carbon brazing, soft aluminum, copper, and stainless steel. The engraving speed can reach up to 800mm/min, with an engraving precision of 100+0.05mm.

5.4 Spindle and Modules
The TTC-H80 comes standard with a 500W or 800W spindle. It can also be used with the Two Trees TC20 laser module (purchased separately). Fixtures of 65mm and 69mm are available for customized upgrades, such as integrating 65mm trimming machines (also purchased separately).
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your TTC-H80 CNC Router Machine.
- Cleaning: Regularly clean the machine, especially the work area, to remove dust, wood chips, and other debris.
- Lubrication: Periodically lubricate the linear guide rails and ball screws as recommended in the detailed maintenance guide (if provided separately) to ensure smooth movement.
- Sealed Design: The XYZ transmission profile features a sealed design to protect internal components from dust and debris, reducing the frequency of internal cleaning for these parts.
- Tool Inspection: Inspect engraving bits and tools before each use for wear or damage. Replace dull or damaged tools to maintain engraving quality and prevent machine strain.
- Power Disconnection: Always disconnect the machine from the power supply before performing any cleaning, lubrication, or maintenance tasks.
7. Troubleshooting
This section addresses common issues you might encounter with your TTC-H80 CNC Router Machine.
7.1 Machine Not Powering On
- Check if the power cable is securely connected to both the machine and a working power outlet.
- Ensure the power switch on the control box is in the 'ON' position.
- Verify that the power supply (24V 4A 150W) is functioning correctly.
7.2 Engraving Quality Issues
- Rough or Uneven Cuts: Check if the engraving bit is sharp and undamaged. Ensure the material is securely clamped to the work table. Adjust engraving speed and depth settings in your software.
- Inaccurate Engraving: Verify that the linear guide rails and ball screws are clean and properly lubricated. Check for any loose connections in the machine's frame or moving parts.
7.3 Connection Problems (USB/WiFi)
- USB Connection: Ensure the USB cable is properly connected to both the machine and your computer. Try a different USB port or cable.
- WiFi Connection: Verify that the machine is within range of your WiFi network and that the network credentials entered on the touch screen are correct.
For persistent issues, refer to the detailed troubleshooting guide (if available) or contact customer support.
8. Specifications
Below are the technical specifications for the Twotrees TTC-H80 CNC Router Machine:

| Attribute | Value |
|---|---|
| Product Name | TTCH80 CNC Multifunctional Wood Router |
| Brand Name | TWOTREES |
| Machine Type | CNC Router |
| CNC or Not | CNC |
| Material | Aluminum alloy, Plastic |
| Number of Axes | 4 |
| No. of Spindles | ATC |
| Spindle Motor Power | 500W / 800W (depending on configuration) |
| Range of Spindle Speed | 1 - 8000 rpm |
| Working Table Size | 1000x2000X102mm (78.7in x 39.4in x 3.9in) |
| Travel (X axis) | 460mm |
| Travel (Y axis) | 460mm |
| Positioning Accuracy | 0.05mm |
| Repeatability (X/Y/Z) | 0.05mm |
| Engraving Precision | 100+0.05mm |
| Engraving Speed | 800mm/min |
| Carving Material | Plastic, soft aluminum, wood, acrylic, PVC, PVB and other soft materials |
| Engraving Method | USB connection, Wifi-2.4G Hz |
| Screen | 3.5-inch touch color screen |
| Voltage | 24V 5A 120W |
| Power Supply | 24V 4A 150W |
| Power (kW) | 0.08 |
| Dimension (L*W*H) | 742x689x413mm |
| Weight (kg) | 60 |
| Control System Brand | NC Studio |
| Key Selling Points | Multifunctional |
| Machinery Test Report | Provided |
| Video Outgoing-Inspection | Provided |
9. Warranty and Support
The Twotrees TTC-H80 CNC Router Machine comes with a 1-year warranty. This warranty also covers the core components of the machine for 1 year.
For technical support, warranty claims, or any operational questions not covered in this manual, please contact the seller or authorized service center. Ensure you have your product model and purchase details ready when seeking support.
10. User Tips
- Project Planning: Always consider the machine's engraving area (2000mm x 1000mm x 100mm) when designing your projects to ensure they fit within the working limits.
- Material Securing: Use appropriate clamps or fixtures to firmly secure your material to the work table. Any movement during engraving can lead to errors or damage.
- Software Familiarity: Take time to learn your chosen design and control software (e.g., Carveco Maker, Artcam, Easel, Fusion360) to maximize the machine's capabilities.
11. Frequently Asked Questions (FAQ)
- Q: What is the usable engraving area of this machine?
- A: The usable engraving area for the TTC-H80 model is 2000mm x 1000mm x 100mm (78.7in x 39.4in x 3.9in).