1. Introduction
Thank you for choosing the HIROYASU HW-UV910 Dual Band FM Walkie Talkie. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and keep it for future reference.
The HW-UV910 is a versatile 20W V/UHF radio featuring dual-band standby, a wide receiving frequency range from 18-999.999750MHz including Air Band Rx, DTMF/MDC1200 signalling, frequency/channel scan, and adjustable microphone/speaker gain. It boasts a 1.77-inch HD color display and a 2400mAh rechargeable Li-ion battery, offering robust communication capabilities for various applications.
2. Package Contents
Upon opening your HIROYASU HW-UV910 package, please verify that all items listed below are present and in good condition:
- 1 × HIROYASU HW-UV910 Radio Body
- 1 × 12.6V 2400mAh Li-ion Battery Pack
- 1 × SMA-Female FM/136-174/400-470MHz High Gain Antenna
- 1 × Desktop Charger
- 1 × Belt Clip
- 1 × Hand Strap
- 1 × English User Manual
- 1 × Type-C Programming Cable (Optional, depending on package)

3. Setup
3.1. Battery Installation
- Ensure the radio is powered off.
- Locate the battery compartment on the back of the radio.
- Align the battery pack with the contacts on the radio body.
- Slide the battery pack into place until it clicks securely.

3.2. Antenna Attachment
- Locate the antenna connector on the top of the radio.
- Screw the provided SMA-Female High Gain Antenna clockwise onto the connector until it is finger-tight. Do not overtighten.

3.3. Charging the Battery
Before first use, fully charge the battery. The 2400mAh Li-ion battery pack can be charged using the provided desktop charger or via the Type-C port.
- Connect the desktop charger to a power outlet.
- Place the radio (with battery installed) into the charging cradle. The indicator light on the charger will show charging status.
- Alternatively, connect a Type-C cable to the radio's Type-C charging port and a compatible USB power source.


4. Operating Instructions
4.1. Power On/Off and Volume
- To power on, rotate the Volume Knob clockwise. The display will show "HIROYASU" and then "Welcome".
- To power off, rotate the Volume Knob counter-clockwise until it clicks.
- Adjust the Volume Knob to set the desired audio level.
4.2. Basic Menu Navigation
The radio features a 1.77-inch HD color display for easy navigation. Use the arrow keys and the 'OK' button to select menu options.

4.3. Frequency and Channel Selection
- VFO Mode: Directly input frequencies using the keypad.
- Channel Mode: Select pre-programmed channels using the Channel Knob or arrow keys.
- Frequency Step: Adjustable steps including 0.25KHz, 1.25KHz, 2.5KHz, 5KHz, 6.25KHz, 10KHz, 12.5KHz, 20KHz, 25KHz, 50KHz, 100KHz, 500KHz, 1MHz, 5MHz.

4.4. Transmitting (PTT)
Press and hold the Push-To-Talk (PTT) button on the side of the radio to transmit. Release to receive.
4.5. Dual Standby
The HW-UV910 supports dual standby, allowing you to monitor two different frequencies or channels simultaneously.

4.6. NOAA Weather Forecast
Access NOAA weather forecasts for important weather alerts and information.

4.7. FM Radio
The radio can receive FM broadcast signals in the 65-108MHz range.

4.8. Advanced Features
- DTMF: Utilize Dual-Tone Multi-Frequency for various control functions.
- Scrambler: The radio supports 8 groups of scrambler for enhanced privacy.
- Frequency Detect: Automatically detect active frequencies.
- Mic/SPK Gain: Adjust microphone and speaker gain for optimal audio.
- 1750 Tone: Send a 1750Hz tone for repeater access.
- Talkaround: Communicate directly with another radio on the same frequency without using a repeater.
- Channel Alias: Assign custom names to channels for easier identification.
- Air Band Receiving: Receive communications in the 108-136MHz air band.




5. Maintenance
5.1. General Care
- Clean the radio's exterior with a soft, damp cloth. Do not use harsh chemicals or solvents.
- Keep the radio dry. Although durable, it is not waterproof.
- Avoid exposing the radio to extreme temperatures or direct sunlight for prolonged periods.
5.2. Battery Care
- Charge the battery fully before first use.
- Do not overcharge or deep discharge the battery.
- If the radio will not be used for an extended period, remove the battery and store it in a cool, dry place.
6. Troubleshooting
- No Power: Check battery installation and charge level. Ensure the Volume Knob is turned on.
- No Signal/Poor Reception: Verify antenna is securely attached. Check frequency settings and ensure you are within range of a transmitting station or another radio.
- Poor Audio Quality: Adjust MIC/SPK gain settings. Ensure the microphone and speaker are not obstructed.
- Radio Not Responding: Try turning the radio off and on again. If issues persist, a factory reset may be necessary (refer to the 'Basic Set' menu for initialization options).
7. Specifications
| Category | Parameter | Value |
|---|---|---|
| General | Frequency Range | FM: 64-108MHz (Rx) Rx: 018-999.99999MHz (AM/FM) TX: 136-174MHz, 400-480MHz |
| Channel Capacity | 1024 + 2 VHF Channel | |
| Channel Spacing (W/N) | Analog: 25kHz/12.5kHz | |
| Voltage | 12.4V DC | |
| Working Mode | Same Frequency simplex, different frequency simplex | |
| Antenna | Removable Antenna | |
| Frequency Stability | ±2.5ppm | |
| Working Temperature | -20°C~60°C | |
| Dimensions (L*W*H) | 155*65*45mm | |
| Transmitting | Power Output | ≤20W |
| Modulation Mode | F3E | |
| Maximum Deviation (W/N) | ≤5KHz/≤2.5KHz | |
| SNR(W/N) | -45dB/-40dB | |
| Tx Current | ≤3000mA | |
| Receiving | Sensitivity(W/N) | 0.22uV/0.25uV 12dB SINAD |
| Inter Modulation (W/N) | 65dB/60dB | |
| Audio Distortion | <5% | |
| Audio Output Power | ≤1W (16ohm) | |
| RX Current | ≤350mA | |
| Standby Current | ≤70mA |
Note: The above parameters are subject to change without prior notice.

8. User Tips
- Always ensure your antenna is properly connected before transmitting to prevent damage to the radio.
- Familiarize yourself with the 'Key Define' menu to customize side buttons for quick access to frequently used functions.
- When operating in areas with potential interference, utilize the CTCSS/DCS scan feature to find clear channels.
- For optimal battery life, avoid completely draining the battery before recharging.
9. Warranty and Support
For any technical assistance, warranty claims, or support inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.