1. Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your ANDELI MCT-416P 7-in-1 Multiprocess Welder. Please read this manual thoroughly before operating the machine.
The ANDELI MCT-416P is a versatile welding machine offering multiple functions including Aluminum MIG, CUT (Plasma Cutting), MIG (CO2/MIX/FLUX), TIG (HF), Pulse MIG, and MMA (Stick) welding. It is designed for both hobbyists and experts, capable of handling various materials such as thin stainless steel, thin steel, carbon steel, iron, and aluminum.
2. Safety Precautions
Always prioritize safety when operating welding equipment. Failure to follow safety guidelines can result in serious injury or death.
- Wear appropriate personal protective equipment (PPE), including welding helmet, gloves, protective clothing, and safety shoes.
- Ensure adequate ventilation to avoid inhaling welding fumes.
- Keep flammable materials away from the welding area.
- Do not operate the machine in wet conditions.
- Ensure proper grounding of the equipment.
- Disconnect power before performing any maintenance or adjustments.
- Refer to local safety regulations and standards for welding operations.
3. Product Overview
The MCT-416P is a 7-in-1 multiprocess welding machine designed for a wide range of applications. It features a large LED digital display for easy parameter adjustment and a transparent screen shield for durability and protection.

3.1 Key Features
- 7-in-1 Multiprocess: Aluminum MIG, CUT (Plasma Cutting), MIG (CO2/MIX/FLUX), TIG (HF), Pulse MIG, and MMA (Stick) welding.
- Aluminum MIG Welding: Upgraded function, suitable for welding aluminum.
- HF TIG Welding: Enables precise control for flawless welds on thin metals and stainless steel.
- Plasma Cutting: Offers high-speed precision for clean and smooth cuts, suitable for industrial-grade efficiency.
- MMA Welding: Provides portability, versatility, and reliable joints in challenging environments.
- Large LED Digital Display: 5-inch screen (114 mm / 4.49 inch wide, 60 mm / 2.36 inch high) for enhanced visibility and easy parameter adjustment.
- Transparent Screen Shield: Protects the display from sparks, splatter, scratches, and impacts.
- 2T Non-Self Lock: Quick fixing, tack welding, beginner-friendly.
- 4T Self-Lock: Suitable for production welding, overhead/vertical positions, or critical welds requiring consistency.
- Spot Welding: Provides fast, cost-effective, and durable joins with minimal distortion.
3.2 Machine Components

- Parameter Button
- Torch Modes Button
- Voltage Adjust Knob
- Main Menu Function Button
- Wire Diameter Selection Button
- Weld Material Selection Button
- Amps Parameters Adjust Knob
- EURO Connector for MIG Gun
- Control Switch Socket
- Positive (+) Output Terminal
- Negative (-) Output Terminal
- CUT Ground Clamp
- CUT/HF TIG Gun Connector
- Power Switch
- Power Input Cable with Plug
- Ground Pin
- Air Filter Regulator Connection
- Fan
- MIG Gas Connector
- CUT Gas/TIG Gas Connector
3.3 Control Panel Introduction

- Input Voltage (110V/220V selection)
- MIG Parameters Adjustment
- Torch Process Methods
- Wire Diameter Selection
- Voltage Display Area / Current Display Area
- MMA Parameters Adjustment
- Material/Gas Selection
- Modes Selection
4. Setup
4.1 Unpacking and Inspection
Carefully unpack the welder and all accessories. Inspect for any damage that may have occurred during transit. Report any damage to the carrier and seller immediately.
The standard package includes the MCT416P welder and a ground clamp. Other accessories like torches may need to be acquired separately.
4.2 Power Connection
- Ensure the power switch (14) is in the OFF position before connecting to power.
- Connect the power input cable (15) to a suitable power outlet. The machine supports both 110V and 220V input.
- Verify the input voltage setting on the control panel (1) matches your power supply.
4.3 Grounding
Connect the ground clamp to a clean, bare metal section of the workpiece or welding table to ensure proper grounding.
4.4 Gas Connection (for MIG, TIG, CUT)
- For MIG welding (CO2/MIX), connect the gas hose to the MIG Gas Connector (19).
- For TIG welding (pure argon gas required) and Plasma Cutting, connect the gas hose to the CUT Gas/TIG Gas Connector (20).
- Ensure all gas connections are secure and leak-free.
- Connect the air filter regulator (17) for plasma cutting operations.
4.5 Torch and Electrode Connections
- MIG Gun: Connect the MIG gun to the EURO Connector (8).
- TIG Torch: Connect the TIG gun to the CUT/HF TIG Gun Connector (13).
- MMA (Stick) Electrode Holder: Connect the electrode holder to the Positive (+) Output Terminal (10) and the workpiece clamp to the Negative (-) Output Terminal (11) for DC electrode positive (DCEP) welding. Reverse for DC electrode negative (DCEN) if required by the electrode type.
- Plasma Cutting Torch: Connect the plasma cutting torch to the CUT/HF TIG Gun Connector (13) and the CUT Ground Clamp (12) to the workpiece.
5. Operating Instructions
5.1 General Operation Steps
- Ensure all connections (power, ground, gas, torch/electrode) are correctly made and secure.
- Turn on the Power Switch (14).
- Select the desired welding/cutting mode using the Modes Selection (8) button on the control panel.
- Adjust parameters (voltage, current, wire speed, etc.) using the respective knobs and buttons (1, 2, 3, 5, 6, 7). The large LED display (5) will show the current settings.
- Perform a test weld/cut on scrap material to verify settings before working on the actual workpiece.
- Always wear appropriate PPE.
5.2 Specific Mode Operations
5.2.1 MIG Welding (CO2/MIX/FLUX/Pulse MIG/Aluminum MIG)

- Select MIG mode.
- Choose wire diameter (4) and weld material (6).
- Adjust MIG parameters (2) including voltage and wire feed speed.
- For Pulse MIG, adjust pulse settings as needed for advanced materials and thin metals.
- For Aluminum MIG, ensure appropriate aluminum wire and shielding gas (usually pure argon) are used.
- Use 2T Non-Self Lock for quick tack welding or 4T Self-Lock for continuous production welding.
5.2.2 HF TIG Welding

- Select TIG mode.
- Ensure pure argon gas is connected and flowing.
- Adjust current (7) and other TIG-specific parameters.
- HF (High Frequency) start provides non-contact arc ignition, ideal for thin metals and stainless steel to prevent contamination.
5.2.3 MMA (Stick) Welding

- Select MMA mode.
- Connect the electrode holder and ground clamp correctly.
- Adjust MMA parameters (6) for current.
- Use appropriate welding rods for the material and application.
5.2.4 Plasma Cutting (HF CUT)

- Select CUT mode.
- Ensure compressed air is connected via the air filter regulator (17) and flowing.
- Adjust cutting current (7).
- The machine can cut up to 12mm (0.59") at 110V and 15mm (0.59") at 220V.
5.3 Welding Techniques
For optimal results, maintain a consistent travel speed, arc length, and electrode angle appropriate for the chosen process and material. Practice on scrap material to develop proper technique.



6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welder.
- Cleaning: Periodically clean the machine's exterior and ventilation openings to prevent dust and debris buildup. Use compressed air to blow out internal components if necessary, ensuring the machine is unplugged.
- Cable Inspection: Regularly inspect all cables (power, ground, torch) for cuts, fraying, or loose connections. Replace damaged cables immediately.
- Consumables: Check and replace consumables (MIG tips, TIG electrodes, plasma cutting nozzles/electrodes) as they wear out to maintain weld/cut quality.
- Gas Lines: Inspect gas lines for leaks and ensure proper flow.
- Air Filter: For plasma cutting, regularly check and clean or replace the air filter regulator (17) to ensure clean air supply.
7. Troubleshooting
This section provides solutions to common issues. For problems not listed here, contact customer service.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to the machine | Power switch off, loose power cable, circuit breaker tripped | Turn on power switch, check power cable connection, reset circuit breaker |
| Poor weld quality (e.g., porosity, lack of fusion) | Incorrect parameters, improper gas flow, contaminated workpiece, worn consumables | Adjust settings, check gas supply/leaks, clean workpiece, replace consumables |
| Plasma cutter not cutting cleanly | Low air pressure, worn plasma consumables, incorrect cutting speed/current | Check air pressure, replace nozzle/electrode, adjust cutting parameters |
| Wire feeding issues (MIG) | Incorrect tension, clogged liner, wrong drive roller size, tangled wire | Adjust tension, clean/replace liner, ensure correct drive rollers, untangle wire |
8. Specifications
Model: MCT-416P
Standard: ANS/IEC STD.60974-1
| Attribute | Value |
|---|---|
| Brand Name | ANDELI |
| Model Number | MCT416P |
| Type | Portable |
| Working Principle | Inverter |
| Installation Method | Self-contained |
| Material | High strength steel |
| Phase | Single phase |
| Max Material Thickness (Welding) | 8MM |
| Max Wire Diameter | 1 mm |
| Welding Rod/Wire Diameter | 1.2 mm, 0.8 mm, 0.6 mm, 1.0 MM |
| Place of Origin | Mainland China |
| Customized Support | OEM |
| Accessories (Standard) | Ground Clamp |
| Accessories (Optional) | Gas pipe, nozzle shield, wire, torches |
8.1 Rated Output (DC Only)
| Voltage | Mode | Duty Cycle | Current | Volts at Rated Current |
|---|---|---|---|---|
| 220V | MIG | 60% | 160A | 22V |
| 220V | TIG | 60% | 45A | 96V |
| 220V | CUT | 60% | 160A | 16.4V |
| 220V | STICK | 60% | 160A | 26.4V |
9. User Tips
- For TIG welding, always use pure argon gas for best results, especially on thin stainless steel to prevent discoloration and achieve high aesthetics.
- When MIG welding aluminum, ensure you have the correct aluminum wire and appropriate shielding gas (typically pure argon or an argon-helium mix).
- The 2T/4T switch is useful: 2T for quick, short welds or tacking, and 4T for longer, continuous welds to reduce finger fatigue.
- Utilize the large LED display to precisely dial in your parameters for different materials and thicknesses.
- Keep the transparent screen shield clean for optimal visibility of settings during operation.
10. Warranty and Support
The ANDELI MCT-416P welder comes with a one-year warranty. Free replacement parts are provided during the warranty period.
For any issues or questions, please contact the seller's customer service team. They offer efficient support and guidance.
The product is CE certified, ensuring it meets European safety standards.