1. Product Overview
The ANDELI Tig-250 Pro is a versatile 9-in-1 LCD Smart TIG Welder designed for a wide range of welding applications. It supports both 110V and 220V input voltages and offers multiple welding functions including AC DC TIG, AC DC PULSE, MMA, Cold Welding, and Lift TIG. This machine is particularly suitable for welding various metals, including aluminum, carbon steel, stainless steel, and titanium.
Key features include a digital display screen for easy operation, adjustable cold-time, channel storage for up to 6 settings, and balance control for clean weld beads. It also incorporates PRE/POST GAS functions to prevent aluminum oxidation and is designed to prevent overheating of thin sheets.
Figure 1: ANDELI Tig-250 Pro Welding Machine and Included Accessories
2. Safety Information
Always prioritize safety when operating welding equipment. This machine is CE certified. Please read and understand all safety warnings and instructions before use.
2.1 Integrated Safety Features
- VDR (Voltage Reduction Device): Reduces open-circuit voltage for enhanced safety.
- Over Voltage Protection: Safeguards the machine from excessive input voltage.
- Over Load Protection: Prevents damage due to excessive current draw.
- Overheating Protection: Automatically shuts down the machine if internal temperatures become too high.
- Over Current Protection: Protects against excessive output current.
Figure 2: Internal View Highlighting Safety and Cooling Systems
3. Package Contents
Upon unpacking, ensure all the following items are present:
- TIG-250 PRO Welder (1 unit)
- Ground Clamp (2 meters, 1 unit)
- TIG Torch WP-26 (4 meters, 1 unit)
- Gas Pipe (3 meters, 1 unit)
- Hose Clamp (2 units)
- Collet (20 units)
- Nozzle (20 units)
- Tungsten Electrode (30 units)
- Foot Pedal (2 units)
- Pyrex Cup Kit (49 pieces, 1 box)
- WP-9F TIG Torch (4 meters, 1 unit)
- Adapter Plug (1 unit)
- Trachea (1 unit)
Figure 3: Detailed View of Included Accessories
4. Setup Instructions
Follow these steps to set up your ANDELI Tig-250 Pro welding machine:
- Placement: Place the welding machine on a stable, level surface in a well-ventilated area, away from flammable materials.
- Power Connection: Connect the power cable to a suitable 110V or 220V power outlet. The machine is designed for dual voltage operation.
- Gas Connection (TIG Welding):
- Attach one end of the gas pipe to the gas inlet on the rear of the welding machine.
- Connect the other end of the gas pipe to your shielding gas cylinder (e.g., Argon for TIG welding) via a regulator.
- Secure all connections with hose clamps to prevent leaks.
- Torch Connection:
- For TIG welding, connect the TIG torch (WP-26 or WP-9F) to the appropriate TIG output terminal on the front panel.
- Ensure the torch's gas line is also connected if it's separate.
- Ground Clamp Connection: Attach the ground clamp cable to the workpiece or welding table, ensuring good electrical contact. Connect the other end to the ground terminal on the welding machine.
- Foot Pedal Connection: If using a foot pedal for remote current control, connect it to the designated port on the front panel.
- Electrode/Rod Installation:
- For TIG welding, insert a tungsten electrode into the TIG torch collet and tighten.
- For MMA welding, insert the welding rod into the electrode holder.
Figure 4: Front Panel Connections
Figure 5: Rear Panel Connections
5. Operating Instructions
5.1 Digital Display Screen
The machine features a graphical digital display for intuitive control and monitoring of welding parameters.
Figure 6: Digital Display Interface
5.2 Welding Modes
The Tig-250 Pro offers 9 versatile welding modes:
- TIG AC Pulse Sine
- TIG AC Pulse Square
- TIG AC Trapezoidal
- TIG AC Sine
- TIG AC Square
- TIG AC Pulse Square
- TIG DC Pulse
- TIG DC
- MMA (Manual Metal Arc)
Figure 7: 9-in-1 Versatile Welding Mode Selection
5.3 Welding Parameters and Materials
The machine is capable of welding various metals with specific thickness ranges:
- Aluminum Welding: 0.5-5mm
- Cold Welding: 0.3-1mm
- TIG Welding (General): 0.8-8mm
Supported materials include Carbon Steel, Stainless Steel, Aluminum Alloy, Titanium, Mild Steel, Galvanized Sheet, Cast Iron, and Metal Cage structures.
Figure 8: Wide Range of Weldable Metals
5.4 Example Welding Parameters
Refer to these example parameters for common welding tasks:
- 1mm Aluminum Parameters:
- Start Current (Stort): 10A
- Downslope (Dlslope): 0.1s
- Upslope (Llslope): 0.1s
- Stop Current (Stop): 10A
- Peak Current (Peak): 40A
- Balance: 30%
- AC Frequency: 150Hz
- Post Gas: 2.5s
- 2mm Stainless Steel Parameters:
- Pre Gas: 0.1s
- Post Gas: 2.5s
- Peak Current (Peak): 230A
- Weld Frequency: 0Hz
- Weld Time: 90ms
Figure 9: Real Welding Parameters Examples
5.5 Channel Storage
The machine allows for storage of up to 6 welding parameter channels, enabling quick recall of frequently used settings.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welding machine.
- Cleaning: Keep the machine clean and free from dust and debris. Use compressed air to clear ventilation openings regularly.
- Cable Inspection: Periodically inspect all cables (power, torch, ground) for damage, cuts, or frayed insulation. Replace damaged cables immediately.
- Torch Maintenance: Clean the TIG torch components (collet, collet body, nozzle, tungsten electrode) regularly. Replace worn-out parts as needed.
- Gas System: Check gas lines and connections for leaks. Ensure the gas regulator is functioning correctly.
- Storage: Store the machine in a dry, clean environment when not in use.
7. Troubleshooting
This section provides solutions to common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not power on. | No power supply; faulty power cable; internal fuse blown. | Check power outlet and cable. Ensure main switch is ON. Consult service if fuse is suspected. |
| No arc initiation. | Poor ground connection; incorrect welding parameters; worn tungsten electrode (TIG); incorrect rod (MMA). | Ensure solid ground connection. Adjust current/voltage. Sharpen/replace tungsten. Use correct rod. |
| Poor weld quality (e.g., porosity, contamination). | Insufficient shielding gas; gas leak; contaminated workpiece; incorrect gas flow rate. | Check gas cylinder level. Inspect gas lines for leaks. Clean workpiece thoroughly. Adjust gas flow. |
| Machine overheats and shuts down. | Exceeding duty cycle; blocked ventilation; high ambient temperature. | Allow machine to cool down. Clear ventilation openings. Reduce welding time or current. |
8. Specifications
| Parameter | Value |
|---|---|
| Model | TIG-250PRO (Upgraded from TIG 205 Pro 9-in-1) |
| Material / Metal Processed | Carbon steel, Stainless steel, Aluminium, Titanium |
| Rated Input Voltage | 110V / 220V |
| Max. Load Power Capacity | 10 kVA |
| Output Polarity | AC DC TIG |
| Condition | New |
| Place of Origin | Zhejiang, China |
| Brand Name | ANDELI |
| Pulse Frequency | 50/60Hz |
| Motor Type | DC MOTOR |
| Rated Output Current | 200A |
| Welding Current/Voltage Range | 220 V, 110 V |
| Rated Duty Cycle @40°C (TIG) | 60% |
| Welding Thickness | 0.3-8 mm (varies by mode/material) |
| Weight (KG) | 12 |
| Feature | INVERTER |
| Key Selling Points | Easy to Operate |
8.1 Product Parameters Table
Figure 10: Comprehensive Product Parameters
9. User Tips
- Start with Lower Settings: If you are new to welding or working with a new material, start with lower current and voltage settings and gradually increase them until you achieve the desired weld.
- Practice on Scrap Material: Before working on your main project, practice on similar scrap material to fine-tune your settings and technique.
- Maintain Cleanliness: A clean workpiece and clean torch components are crucial for high-quality welds, especially with TIG welding.
- Utilize Channel Storage: Save your preferred settings for different materials and thicknesses using the 6-channel storage feature for quick setup.
- Adjust Cold-Time: Experiment with the adjustable cold-time feature for optimal results in cold welding applications.
10. Warranty and Support
The ANDELI Tig-250 Pro welding machine comes with a two-year warranty from the date of purchase, covering manufacturing defects and free replacement parts. The product is CE certified, ensuring compliance with European safety standards.
For any issues or questions regarding the product, please contact our efficient customer service team for free guidance. We are committed to providing support and assistance.