1. Introduction
The FYD-09 Desktop Holographic Display is an innovative device designed to create captivating 3D suspended images without the need for special glasses. It combines advanced software and hardware to process two-dimensional images through a layer-by-layer perspective, resulting in a realistic aerial phantom. This device is ideal for various applications, including advertising, digital photo frames, gifts, and as an AI voice assistant.
The display features a stylish cylindrical design with a 7-inch high-definition LCD screen, running on Android 7 with 1GB RAM and 32GB storage. It supports WiFi connectivity and offers multiple ways to upload content, ensuring versatility and ease of use.
2. Product Overview
2.1 Key Features
- Stereoscopic Imaging: Through surface mirroring and reflection, free-floating images and graphics are visible in the cylindrical space.
- Bright Colors: The cabinet is stylish and beautiful, with bright, high-contrast, and clear spatial imaging.
- Realistic Imaging: Achieves a realistic virtual image with a cool stereoscopic effect, visible to the naked eye.
- Strong Sense of Space: Light signals are emitted and gathered to form a stereoscopic image with real dimensional depth.
- Easy to Install: Portable and designed for desktop use.
- AI Voice Assistant: Supports installation of AI voice software for interactive communication.
2.2 Components
The FYD-09 consists of a transparent cylindrical display housing a base unit. The base contains the internal electronics, battery, and ports. The top panel features control buttons.
3. Setup
- Unpacking: Carefully remove the FYD-09 device and all accessories from its packaging.
- Placement: Place the device on a stable, flat surface. Ensure there is adequate space around the device for optimal viewing and ventilation.
- Power Connection: Connect the provided DC 5V2A power adapter to the DC input port located at the bottom of the device. Plug the adapter into a suitable power outlet.
- Initial Charge: For first-time use, it is recommended to fully charge the device. The built-in 13500mAh lithium battery takes approximately 3 hours to fully charge and provides up to 11 hours of use.
4. Operating Instructions
4.1 Basic Controls
The device can be controlled using the buttons on the top panel or the included remote control.
Top Panel Buttons:
- Power Button: Press and hold to turn the device ON/OFF. A short press typically acts as Play/Pause.
- Volume Up/Down: Adjusts the audio volume.
- Previous/Next Track: Navigates through media content.
- Battery Indicator: Shows the current battery status.
Remote Control Functions:
The remote control provides comprehensive navigation and playback options, including power, volume, track control, and menu navigation (refer to Figure 3 for remote layout).
4.2 AI Voice Assistant
The FYD-09 supports AI Voice Assistant functionality. You can install compatible AI voice software on the device to enable voice interaction.
5. Content Upload
There are several methods to upload 2D/3D videos and images to your FYD-09 device:
5.1 Direct Media Transfer
- USB Disk / TF Card: Insert a USB disk or TF card containing your media files into the respective port at the bottom of the device. The device should automatically detect and allow playback of supported formats.
5.2 Mobile App
Utilize a dedicated mobile application (if provided by the manufacturer) to wirelessly upload and manage content on your device.
5.3 ADSV CMS Software (WiFi & Cloud Server)
The device comes with pre-installed ADSV APK and an account on the CMS Backstage for remote content management.
Three Easy Steps for CMS Content Upload:
- Step 1: Device Preparation
Turn on the FYD-09 device, connect it to your WiFi network, and open the pre-installed ADSV application to run. - Step 2: Upload Content via CMS Backstage
Use your phone or computer to access the CMS Backstage website. Log in with your provided account. From there, you can upload and publish your desired videos and images. - Step 3: Automatic Content Download
The FYD-09 device will automatically download the published content from the Cloud Server and begin continuous loop playback. This allows for easy and remote management of display content across multiple devices anytime, anywhere.
5.4 Supported Video/Image Formats
The device supports a wide range of video and image formats, including but not limited to:
- Video: Mpeg1 MP/HL, Mpeg2 MP/HL, Mpeg4 SP/ASP L5, XVID, H.263BP, H.264 BP/MP/HP/Level4.2, H.265 MP/L4.1, Sorenson Spark, WMV9/VC-1SP/MP/AP, WMV7, WMV8, VP6, MJPEG, rmvb8/9/10.
- Images: Standard image formats (e.g., JPG, PNG) are generally supported.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the device. For the transparent cylinder, a slightly damp, lint-free cloth can be used, followed by a dry cloth to prevent streaks. Avoid abrasive cleaners or solvents.
- Handling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts.
- Ventilation: Ensure the device is placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
- Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
7.1 Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low battery or power adapter issue | Ensure the device is fully charged or connected to a working power outlet. Check the power adapter and cable for damage. |
| No image displayed | No content loaded or incorrect format | Upload content using one of the methods described in Section 5. Ensure content is in a supported format. |
| Image appears distorted or low quality | Low resolution content or improper viewing angle | Use high-resolution content (preferably 1280x800). Ensure the device is viewed from an appropriate angle for optimal 3D effect. |
| Cannot connect to WiFi | Incorrect password or network issue | Double-check the WiFi password. Ensure the device is within range of the WiFi router. Restart the device and router. |
| Remote control not working | Dead batteries or obstruction | Replace remote control batteries. Ensure there are no obstructions between the remote and the device's IR receiver. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | FYD-09 |
| Application | Indoor / semi-outdoor advertising for Shopping Mall, Restaurants, Hotels, Coffee Shops, Bars, Weddings, Waiting rooms, Events, Exhibitions, etc. |
| Dimensions (Size) | 113mm (Diameter) x 232.5mm (Height) |
| CPU | RK3128 Chip |
| Operating System | Android 7 |
| Resolution | 1280*800 |
| Display Mode | Black, IPS |
| Brightness | 600 nits |
| Color Gamut | 74% |
| Storage | 1GB RAM + 32GB Internal Storage |
| Connectivity | WiFi Connection, USB, TF Card |
| Input Voltage | DC: 5V2A |
| Battery Capacity | 13500mAh Lithium Battery |
| Battery Life | Approx. 11 hours (after 3 hours full charge) |
| Working Temperature | 0°C to 50°C |
| Speaker | 4Ω5W |
| Warranty | 1 year |
9. User Tips
- Content Creation: For the most impactful 3D effect, ensure your video and image content is designed with a transparent or black background. This helps the holographic illusion appear more seamless.
- Placement for Impact: Position the display at eye level in areas with moderate lighting to maximize the visibility and realism of the holographic projections. Avoid direct harsh light sources that might cause glare.
- Remote Management: Take advantage of the ADSV CMS software for easy content updates, especially if you are managing multiple units or frequently changing your displayed content.
10. Warranty and Support
10.1 Warranty Information
The FYD-09 Desktop Holographic Display comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
10.2 Customer Support
For any technical assistance, troubleshooting, or inquiries regarding your FYD-09 device, please contact our customer service team:
- Telephone: +86 18674321147 (Max)
- WhatsApp: +86 17353454425
- Email: snowx333377@gmail.com
11. Product Video
Watch this video to see the FYD-09 Desktop Holographic Display in action, showcasing its naked-eye 3D display effect and various applications.