XinYi Sini Audio XY-AP3002

Contents

XY-AP3002 Pure Rear Digital Amplifier Board User Manual

Model: XY-AP3002 | Brand: XinYi Sini Audio

1. Introduction

The XY-AP3002 is a high-performance Class D power amplifier board designed for superior audio quality and efficiency. Utilizing the advanced TPA3255 chip, it delivers high-definition sound with ultra-low distortion across the entire audio frequency band. This amplifier board offers flexible application in both dual-channel (300W+300W) and single-channel bridged (600W) configurations.

Key features include an MCU intelligent anti-POP sound mechanism, a temperature-controlled fan for optimal cooling, adjustable gain, and comprehensive protection mechanisms to ensure reliable operation.

TPA3255 Amplifier Chip Overview

The TPA3255 is a high-performance Class D power amplifier that boasts Class D efficiency and delivers truly high-end sound quality. The device features an advanced integrated feedback design and proprietary high-speed gate driver error correction function (PurePath™ Ultra-HD). This technology enables devices to maintain ultra-low distortion across the entire audio frequency band while showcasing high-definition sound quality.

TPA3255 Audio Power Core diagram showing chip and surrounding components

Figure 1: TPA3255 Audio Power Core with High Efficiency, Low Power Consumption, HD Audio Quality, and Comprehensive Protection Mechanism.

2. Package Contents

Please inspect the package carefully for the following items:

  • 1x XY-AP3002 Pure Rear Digital Amplifier Board (Available in Integrated or External Potentiometer Version)
  • 1x XH2.54-3P Audio Cable (20cm length, included with External Potentiometer Version)
  • 1x Screwdriver (for adjustments and assembly)
Delivery Display Instructions for Different Versions showing integrated and external potentiometer versions with their respective package sizes

Figure 2: Different versions of the amplifier board and their package contents.

XH2.54-3P Audio Cable, 20cm length

Figure 3: XH2.54-3P Audio Cable.

Small screwdriver

Figure 4: Included screwdriver.

3. Specifications

XY-AP3002 Configuration Parameters table

Figure 5: XY-AP3002 Configuration Parameters.

XY-AP3002 Configuration Parameters
ParameterValue
BrandXinYi Sini Audio
NamePower amplifier board
ModelXY-AP3002
Power supplyDC18-51V/10A or above
Amplifier chipTPA3255
Audio inputAUX+XH2.54-3P
BTL (Stereo) Output Power:
30W+30W @ 8Ω/24VDC
70W+70W @ 4Ω/24VDC
80W+80W @ 8Ω/36VDC
160W+160W @ 4Ω/36VDC
160W+160W @ 8Ω/50VDC
300W+300W @ 4Ω/50VDC
PBTL (Mono/Parallel) Output Power:
30W @ 8Ω/24VDC
70W @ 4Ω/24VDC
150W @ 2Ω/24VDC
80W @ 8Ω/36VDC
160W @ 4Ω/36VDC
350W @ 2Ω/36VDC
160W @ 4Ω/36VDC
300W @ 4Ω/50VDC
600W @ 2Ω/50VDC
Dimensions of the amplifier board: 124mm length, 67mm width, 33mm height, 17mm knob size

Figure 6: Dimensions of the XY-AP3002 amplifier board.

4. Setup Instructions

4.1 Basic Connections

Refer to the diagram below for basic wiring and component identification:

Basic functions and cable connections diagram showing power input, speaker outputs, AUX inputs, and power/volume knob

Figure 7: Basic functions and cable connections.

  1. Power Input: Connect a DC18-51V power supply to the power input port. Ensure the power supply is capable of delivering 10A or above.
  2. Speaker Output: Connect your speakers to the 'Speaker (Right)' and 'Speaker (Left)' terminals.
  3. Audio Input: Connect your audio source using either the 3.5mm AUX input or the XH2.54-3P AUX input.
  4. Power ON/OFF / Volume Adjustment: The knob controls both power and volume. Rotate counter-clockwise until a 'click' is heard to turn off.

4.2 Potentiometer Versions

The XY-AP3002 is available in two versions: Integrated Potentiometer and External Potentiometer.

Integrated Potentiometer Version of the amplifier board

Figure 8: Integrated Potentiometer Version.

External Potentiometer Version of the amplifier board with cable

Figure 9: External Potentiometer Version.

The External Potentiometer Version includes an XH2.54-3P audio cable for connecting the external potentiometer.

5. Operating Modes

The amplifier board supports both BTL (Stereo) and PBTL (Mono/Parallel) modes, configurable via the DIP switches (S1).

Amplifier board components including audio special inductors, heatsink, temperature-controlled fan, capacitor array, solid capacitance, audio capacitance, NE5532 chips, and bridge pattern switch

Figure 10: Internal components and Bridge Pattern Switch.

5.1 BTL (Stereo) Mode

For BTL mode operation, ensure DIP switch S1 is set to the OFF position for both switches (1 and 2). Connect your left and right speakers to the respective output terminals.

5.2 PBTL (Mono/Parallel) Mode

For PBTL (Paralleled outputs) mode, set DIP switch S1 to the ON position for switch 1. This enables PBTL mode. Before configuring for PBTL mode, ensure the power supply is disconnected or the unit is powered off.

Paralleled outputs wiring diagram for PBTL mode

Figure 11: Wiring for PBTL (Paralleled outputs) mode.

In PBTL mode, connect the R+ and L+ terminals together, and the R- and L- terminals together. The default audio input is for the left channel, but it can also accept both left and right channels input simultaneously. Remember to restart the amplifier after enabling PBTL mode.

5.3 Video Demonstration

Video 1: Demonstrates the setup for BTL and PBTL modes, including connecting speakers, power, and audio input, followed by a load capacity test showing power output up to 600W.

6. Controls and Adjustments

Multi-function volume knob and gain adjustment resistors

Figure 12: Multi-function volume knob and gain adjustment.

6.1 Volume Knob / Power Switch

The main knob on the amplifier board serves as both the power switch and volume control:

  • Power Switch: Rotate the knob counter-clockwise to the end until a clear "click" sound is heard to turn off the amplifier.
  • Volume Adjustment: This utilizes an analog potentiometer for continuous signal and power output control, avoiding the discontinuity often found in digital volume adjustments.

6.2 Gain Adjustment

The gain of the left and right channels can be adjusted. The formula for gain is Gain = R/10K, with a default R value of 20K. The default gain is suitable for most applications. If you require a different gain setting, it is recommended to contact the manufacturer for guidance.

7. Intelligent Features

7.1 Smart MCU with Advanced Algorithms

Smart MCU chip and Smart Fan operation details

Figure 13: Smart MCU and Smart Fan.

The amplifier board incorporates a Smart MCU with advanced algorithms to suppress POP noise, which is typically generated when the power is turned on or off, ensuring a cleaner audio experience.

7.2 Smart Fan Control

The integrated fan features intelligent temperature control:

  • When DIP switch No. 1 is ON, the fan will start working immediately after power on.
  • When DIP switch No. 1 is OFF, the fan will start working only when the temperature exceeds 50°C.

7.3 Intelligent Protection

Intelligent Protection features: MCU-based speaker shock protection, reverse-connection protection, under-voltage protection, over-voltage protection, over-current protection

Figure 14: Intelligent Protection features.

The XY-AP3002 is equipped with multiple intelligent protection features to safeguard the device and connected components:

  • MCU-based speaker shock protection
  • Reverse-connection protection
  • Under-voltage protection
  • Over-voltage protection
  • Over-current protection

8. Maintenance

To ensure the longevity and optimal performance of your amplifier board:

  • Keep the board clean and free from dust. Use a soft, dry brush or compressed air to clean the fan and heatsink regularly.
  • Ensure adequate ventilation around the amplifier board to prevent overheating, especially during high-power operation.
  • Avoid exposing the board to moisture or extreme temperatures.
  • Periodically check all connections to ensure they are secure.

9. Troubleshooting

9.1 Common Issues & Solutions

  • No Sound Output:
    • Check power supply connections and ensure the board is powered on.
    • Verify audio input source is correctly connected and active.
    • Ensure speaker connections are secure and correct for the selected mode (BTL/PBTL).
    • Check volume knob position.
  • Distorted Sound:
    • Ensure the power supply voltage is within the specified DC18-51V range and stable.
    • Check audio input cable for damage or loose connections.
    • Verify speaker impedance matches the amplifier's capabilities.
  • Fan Not Running:
    • If DIP switch No. 1 is OFF, the fan will only activate when the board temperature exceeds 50°C. This is normal operation.
    • If DIP switch No. 1 is ON and the fan is not running, check the fan connection.
  • Unit Not Powering On:
    • Verify the power supply is connected correctly and providing the specified voltage (DC18-51V).
    • Ensure the power/volume knob is rotated clockwise past the 'click' to the ON position.

9.2 Q&A

Q: What is the maximum voltage that the amplifier can withstand?
A: The maximum recommended supply voltage for the XY-AP3002 is 51V DC. Please refer to the specifications table for detailed power supply requirements (DC18-51V/10A or above).

10. User Tips

  • Packaging Inspection: Upon receiving your amplifier board, carefully inspect all components, especially delicate parts like capacitors, for any signs of damage that might have occurred during transit.
  • Power Supply: Always use a stable power supply within the specified DC18-51V range to prevent damage and ensure optimal performance. An unstable or incorrect voltage can lead to malfunction or permanent damage.
  • Cable Management: When installing, ensure all cables are properly routed and secured to avoid accidental disconnections or damage.

11. Warranty & Support

For detailed warranty information, technical support, and a complete version of the user manual, please refer to the official documentation. A PDF version of the user manual is available for download:

View User Manual (PDF)

For further assistance, please contact your retailer or the manufacturer directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.