1. Introduction
Thank you for purchasing the HIROYASU HW-UV938 Walkie Talkie. This device is a versatile communication tool offering a wide range of features including CB, HF, Shortwave, SSB, Air Band, VHF, UHF, and full-band reception, along with cross-band repeater functionality, scrambler, and NOAA weather forecast. This manual will guide you through the setup, operation, and maintenance of your new walkie talkie.
2. Package Contents
Please check the box for the following items:
- 1 × HIROYASU HW-UV938 Radio Body
- 1 × 7.4V 2400mAh Li-ion Battery Pack
- 1 × SMA-Female FM/136-174/400-520MHz High Gain Antenna
- 1 × Desktop Charger
- 1 × Type-C Charging Cable
- 1 × AC Adapter
- 1 × Belt Clip
- 1 × Hand strap
- 1 × English User Manual
- 1 × Type-C Programming Cable (Optional)
- 1 × Shortwave Donut Antenna (Optional)
3. Product Overview
Familiarize yourself with the components and controls of your HW-UV938 walkie talkie.


4. Setup
4.1 Battery Installation
- Ensure the walkie talkie is powered off.
- Align the battery pack with the back of the radio body.
- Slide the battery pack upwards until it clicks into place.
- To remove, press the battery release latch and slide the battery downwards.

4.2 Antenna Attachment
- Screw the provided SMA-Female antenna clockwise into the antenna connector on top of the radio until it is finger-tight. Do not overtighten.
4.3 Charging the Battery
The HW-UV938 supports both desktop charger and Type-C direct charging.
- Using Desktop Charger: Connect the AC adapter to the desktop charger, then plug the AC adapter into a power outlet. Place the walkie talkie (with battery installed) into the charging cradle. The indicator light on the charger will show charging status.
- Using Type-C Cable: Open the rubber cover on the side of the walkie talkie to reveal the Type-C port. Connect the Type-C charging cable to the port and the other end to a compatible USB power source.

5. Basic Operation
5.1 Power On/Off and Volume Control
- To power on, rotate the ON/OFF volume knob (7) clockwise.
- To power off, rotate the ON/OFF volume knob (7) counter-clockwise until it clicks.
- Adjust the volume by rotating the ON/OFF volume knob (7).
5.2 Display Screen
The 2.4-inch TFT color LCD provides clear information on frequency, channel, mode, and signal strength.


5.3 Menu Navigation
Use the keypad and navigation buttons to access and adjust settings.
5.4 Frequency Step Adjustment
You can adjust the frequency step for precise tuning.

6. Advanced Features
6.1 Cross-Band Repeater
The HW-UV938 supports cross-band and same-frequency inter-transfer repeater functions.

6.2 NOAA Weather Forecast
Stay informed with NOAA weather forecasts.

6.3 AM/FM Radio Reception
The device supports AM/FM radio reception across various bands.

6.4 Scrambler Function
The HW-UV938 includes 8 groups of scrambler for secure communication.

6.5 DTMF
The device supports DTMF (Dual-Tone Multi-Frequency) signaling.

6.6 Key Define
Customize the functions of the side keys and long press actions.

6.7 MIC/Speaker Gain Adjustment
Adjust microphone and speaker gain for optimal audio quality.

6.8 Air Band Receiving
The HW-UV938 is capable of receiving air band frequencies.

7. Specifications
The following table details the technical specifications of the HIROYASU HW-UV938 Walkie Talkie:

| Category | Specification |
|---|---|
| Tuner Technology | AM/FM |
| Dimensions | 149*64*37mm |
| Storage Channel | 1024 |
| Battery Capacity(mAh) | 2400 |
| Display Screen | Yes |
| Maximum Range | 5km-10km |
| Is Batteries Included | Yes |
| Type | Portable |
| Output Power(w) | 5w-10w |
| Frequency Range | SW 2.3-30MHz,MW:520-1710KHz,LW:153-279KHz,18-620MHz,840-1000MHz |
| Waterproof | NO |
| Material | Plastic,Others |
| Model Name | HW-UV938 |
| Brand Name | HIROYASU |
| Origin | Mainland China |
| Item Type | Mobile Radio |
Note: The above parameters are subject to change due to technical improvement without prior notice or liability.
8. Maintenance
8.1 General Care
- Clean the radio with a soft, damp cloth. Do not use harsh chemicals or solvents.
- Avoid exposing the radio to extreme temperatures, direct sunlight, or moisture.
- Keep the antenna and charging ports free from dust and debris.
8.2 Battery Care
- Charge the battery fully before first use.
- Do not short-circuit the battery terminals.
- Do not disassemble the battery pack.
- Dispose of used batteries according to local regulations.
9. Troubleshooting
- No Power: Ensure the battery is correctly installed and charged. Check the ON/OFF volume knob.
- Cannot Transmit/Receive: Verify the antenna is securely attached. Check the frequency and channel settings. Ensure the battery has sufficient charge.
- Poor Audio Quality: Adjust MIC/Speaker Gain settings. Check for obstructions around the microphone and speaker.
- Interference: Try changing the frequency or channel. Ensure no other electronic devices are causing interference.
10. User Tips
- Optimize Range: For maximum range, ensure your antenna is fully extended and you have a clear line of sight to the other radio or repeater.
- Battery Life: To conserve battery life, reduce the display brightness and consider using the 'APO' (Auto Power Off) feature if available in the menu.
- Customization: Explore the 'Key Define' menu to assign frequently used functions to the programmable side keys for quick access.
- Weather Alerts: Regularly check the NOAA Weather Forecast feature, especially when operating outdoors, to stay informed about changing weather conditions.
11. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact the retailer. Keep your proof of purchase for any warranty claims.