HZTZ POS-9260

Contents

Thermal Label Printer Instruction Manual

Model: HZTZ POS-9260

1. Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your HZTZ POS-9260 Thermal Label Printer. This compact and efficient printer is designed for high-speed, clear quality label printing, compatible with various platforms and operating systems.

HZTZ POS-9260 Thermal Label Printer
HZTZ POS-9260 Thermal Label Printer
Printer compatibility with various platforms including UPS, FedEx, Amazon, Shopify
Widely compatible with various platforms for shipping and e-commerce.

2. Safety Precautions

Please read this manual carefully before operating the printer to ensure correct and safe usage.

Security Warning

  • Adapter Usage: It is strongly recommended to use the adapter provided by our company. Connecting an improper adapter may cause fire, explosion, or damage to the printer.
  • Hot Surfaces: When the printer is working or just after printing, do not open the top cover or touch the print head or printer body with your hands. Overheating may cause burns.

General Precautions

  1. Do not use or store the printer in places with high temperature, high humidity, or serious pollution.
  2. Connect the printer's power adapter to a properly grounded socket. Avoid using the same socket as a large motor or other device that can cause power voltage fluctuations.
  3. Avoid water or conductive substances (such as metal) entering the inside of the printer. If this occurs, turn off the power immediately.
  4. The printer must not print without paper, otherwise the printing roller and thermal print head will be seriously damaged.
  5. Users are not allowed to disassemble the printer for maintenance or modification without authorization.
  6. To ensure printing quality and product life, it is recommended to use equivalent quality thermal paper.
  7. Please keep this user manual properly for future reference.

3. Product Specifications

Internal structure and specifications of the thermal label printer
Structure Introduction and Key Specifications
Technical Specifications
FeatureSpecification
Product ModelPOS-9260 thermal label printer
Printing MethodDirect line thermal printing
Printing Speed160mm/s (Max)
Resolving Power203dpi
Communication InterfaceUSB (Standard) / Bluetooth (Optional) / Wi-Fi (Optional)
Product Size180mm x 78mm x 75mm (7.4 x 3.07 x 2.95 inches)
Outer Box Size190mm x 145mm x 97mm
Weight458g
Output VoltageDC 24V/2.5A
Paper Thickness0.08 - 0.2 mm
Paper Width30 - 110 mm (1.18 - 4.33 inches)
Label Paper TypeContinuous Paper, Labels, Folded Paper, TagPaper
Battery IncludedYes
Double-sided PrintingNo
Paper Feed ModeFriction Feed
Product dimensions: 180mm length, 78mm width, 75mm height
Product Dimensions

4. Package Contents

The package includes the following items:

Contents of the printer package: Packaging Box, Printer, User Manual, Power Adapter, USB Cable
What's included in the box.
  • Packaging Box
  • Thermal Label Printer
  • User Manual
  • Power Adapter
  • USB Cable

5. Setup Guide

5.1. Printer Overview and Connections

Back view of the printer showing Feed Button, Type-C Port, DC Power Input, On/Off Switch
Printer Ports and Controls
Internal view of the printer showing Print Head, Paper Guide, Sensor, Rubber Roller, Cover Release Button
Internal Components

5.2. Paper Roll Installation & Button Instructions

Note: The printer ports may vary depending on the customer selection. The printer ports shown below are for reference only.

  1. Open the printer cover.
  2. Place the thermal paper roll into the paper loading position as shown in the figure. Ensure the roll paper side is up. Maximum diameter 100mm.
  3. Pull out a short length of paper to the outside of the box, then close the top cover.

Paper Loading Methods:

  • Roll paper loading: Insert roll with paper side up (max diameter 100mm).

  • Stacked paper loading: For fanfold labels.

5.3. Driver Installation

Printer drivers and tools can be downloaded from: www.cnfujun.com/d/66

5.3.1. For Mac OS Users

Please confirm the printer is turned on and connected to your computer by USB cable before installing the driver. Note: Bluetooth connection is not supported on Mac systems for driver installation.

  1. Mac Driver Installation:
    1. Our package contains a USB flash drive with an installation package. Please follow the steps.
    2. Double-click the file Labelprinter2.3.3.dmg.
    3. Click 'Continue'.
    4. Enter your computer's local password and click 'Install Software'.
    5. Click 'Install'.
    6. Once installation is successful, click 'Close'.
  2. Add Printer to Your MacBook:
    1. Click the Apple icon in the upper left corner, then click 'System Settings...'.
    2. Click 'Printers & Scanners'.
    3. Click 'Add Printer, Scanner, or Fax...' to add the printer driver.
    4. How to add a printer on MAC (M1 system): click '+' to add a new printer.
    5. Click 'LABEL-9X00' in the box to automatically identify and add it, then click 'Add' to complete the addition.
    6. Installation complete.

5.3.2. For Windows OS Users

  1. Find the 'LabelDriver.exe' file and double-click to open it.
  2. If prompted by User Account Control, click 'Yes' to allow the app to make changes.
  3. Select 'Installing the Printer Driver' and click 'Next'.
  4. Note: If the printer is not powered on or the USB cable is not connected to the computer, the installation cannot continue. Make sure the printer is powered on and the USB cable is connected to the computer.
5.3.2.1. USB Port Connection (Windows)
  1. Select the USB port (e.g., 'USB001' or 'VID 0416 PID 5011') and click 'Next'.
  2. The default selected model 'LABEL-GX00' will appear. Click 'Next'.
  3. The default generated printer name 'LABEL' will appear. Click 'Next'.
  4. A prompt to prepare to install the driver will appear. Click 'Next'.
  5. If 'Windows Security' appears, click 'Install'. This means all settings are OK. The printer will automatically print a test page. Click 'Close'.
  6. Congratulations, you have completed the USB port printer driver installation.
5.3.2.2. Bluetooth Port Connection (Windows)
  1. Select the 'Bluetooth' port and click 'Next'. Note: If the computer does not have Bluetooth or Bluetooth is turned off, the installation cannot continue. Make sure the computer's Bluetooth is turned on.
  2. The computer automatically searches for nearby Bluetooth devices. Wait patiently and select the printer with the default Bluetooth name 'Bluetooth Printer' to connect. (The printer self-test page will contain the printer's Bluetooth name and address information.) The software's default Bluetooth pairing code is '1234'. Click 'Next'.
  3. The default selected model 'LABEL' will appear. Click 'Next'.
  4. The default generated printer name 'LABEL' will appear. Click 'Next'.
  5. A prompt to prepare to install the driver will appear. Click 'Next'.
  6. If 'Windows Security' appears, click 'Install'. This means all settings are OK. The printer will automatically print a test page. Click 'Close'.
  7. Congratulations, you have completed the Bluetooth port printer driver installation.
5.3.2.3. Network or WiFi Port Connection (Windows)
  1. Select the 'Network or WIFI' port and click 'Next'.
  2. Click 'Next' again.
  3. The default selected Port (on the self-test page) will appear, showing the IP address (e.g., 192.168.1.100) and IP port (e.g., 9100). Click 'Next'.
  4. The default generated printer name 'LABEL' will appear. Click 'Next'.
  5. A prompt to prepare to install the driver will appear. Click 'Next'.
  6. If 'Windows Security' appears, click 'Install'. This means all settings are OK. The printer will automatically print a test page. Click 'Close'.
  7. Congratulations, you have completed the Network or WiFi port printer driver installation.

6. Operating Instructions

Printer connected via USB to laptop and Bluetooth to phone, showing printing process
Print via Bluetooth/USB Cable from various devices.
High-speed printing with clear quality
Experience high-speed and clear quality printing.

6.1. Printing on Mac

  1. Open the PDF file that needs to be printed.
  2. Click 'File' then 'Print...'.
  3. Click 'Other' to select the correct printing size.
  4. Select size '100mmx150mm' (or your desired label size, e.g., 4.00x6.00).
  5. After selecting the size, click 'Default Settings' then 'Save Current Settings as Preset...'.
  6. Enter the name you want to save for the preset and click 'OK'.
  7. Finally, click 'Print' in the lower right corner of the print dialog.

6.2. App & Online Editing for Label Customizations

The printer supports app and online editing tools for fast label customizations, offering over 200 pre-made elements and 50+ free fonts.

Screenshot of label editing software on laptop and mobile app
Utilize app and online tools for custom label design.

7. Maintenance

7.1. How to Clean the Print Head

Clean the print head when:

  • The printing is not clear.
  • A vertical column of the printed page is not clear.
  • Paper feeding noise is loud.
  • There is too much carbon deposit on the print head.

Print Head Cleaning Steps:

  1. Turn off the power of the printer, open the upper cover, and remove any paper.
  2. If you have just finished printing, wait for the print head to cool down completely.
  3. Use a soft cotton cloth dipped in absolute ethanol (ensure it is wrung out) to wipe away dust and stains on the surface of the thermal sensor of the print head.
  4. Wait for the absolute ethanol to evaporate completely, then close the upper cover and try printing again.

Notice:

  • Make sure the power is turned off during routine maintenance of the printer.
  • Do not touch the surface of the print head with your hands or metal objects, and do not use tweezers or other tools to scratch the surface of the print head, printing roller, and sensor. Organic solvents such as gasoline and acetone must not be used.

8. Troubleshooting

8.1. Label Calibration and Exception Handling Methods

8.1.1. Label Calibration Method

If the paper is skipped or continuous printing occurs without stopping, the printer should be calibrated. The method is as follows:

Put the paper into the printer and power on the printer. When the power light is on, press and hold the 'FEED' button for 5-6 seconds until the LED light flashes and the buzzer beeps. Then release the 'FEED' button. After that, restart the printer and perform a test print.

Note: The calibration operation may result in different calibration values due to different paper specifications. The calibration operation can be done according to different cases.

8.1.2. Exception Handling After Calibration

(1) With paper, but the printer reports an error:

When this happens, remove the paper and power off the printer first, then power on the printer. Once the red light flashes, immediately long press the 'FEED' button. Release it when the red light flashes again and the buzzer beeps. After that, wait 2 seconds, then restart the printer and test it again.

(2) Without paper, but the printer does not report an error:

When this happens, remove the paper, power on the printer, and press and hold the 'FEED' button for 5-6 seconds until the red light flashes and the buzzer beeps two times. Then release the button. After that, restart the printer and perform a test.

9. User Tips

  • Calibrating for Different Label Types: If you are using labels with gaps (e.g., die-cut labels), ensure you perform the label calibration method described in section 8.1.1. This helps the printer accurately detect label boundaries and prevents skipping or continuous feeding.
  • Driver Download: Always download the latest drivers from the official website (www.cnfujun.com/d/66) to ensure optimal performance and compatibility.

10. Warranty and Support

For technical support or any inquiries, please refer to the official user manual PDF or contact customer service.

Official User Manual (PDF): A comprehensive PDF version of this manual is available for download. Please refer to the product page or the manufacturer's website for the direct link.

Contact Support: For direct technical assistance, you may contact support via WhatsApp by scanning the QR code below:

QR code for WhatsApp technical support
Scan for WhatsApp Support

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.

© 2023 HZTZ. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.