JIKONG B2A20S20P

Contents

User Manual: JK Smart BMS with Active Balancer

Model: B2A20S20P

1. Introduction

This manual provides essential information for the safe and effective use of your JK Smart Battery Management System (BMS) with Active Balancer, model B2A20S20P. This device is designed to protect various lithium battery chemistries by monitoring and managing their charging and discharging cycles, ensuring optimal performance and longevity.

2. Product Overview

The JK Smart BMS is a highly customizable battery protection board featuring short circuit, overcharge, and over-discharge protection, along with an active cell voltage equalization function. It is equipped with a built-in high-current active balancer and a Bluetooth module for seamless communication with mobile applications (Android, iOS). PC communication is also supported, requiring an additional USB-TTL cable.

The system is designed to support Li-Ion, LiFePO4, and LTO cell packs across a wide range of cell counts (7S-20S depending on chemistry). It includes a common power port, eliminating the need for a separate charger cable, and a circuit breaker for manual control and initial activation.

JK BMS unit with connected balance wires and main power cables
Figure 1: JK Smart BMS B2A20S20P with balance wires and main power cables.
Exploded view diagram of the BMS, illustrating internal components, Bluetooth module, and communication interfaces (RS485/CANBUS)
Figure 2: Exploded view of the BMS showing internal components and communication modules.

3. Specifications

The following table details the technical specifications for the B2A20S20P model:

FeatureSpecification (B2A20S20P)
Manufacturer SymbolB2A20S20P
Supported Cell TypesLiFePO4, Li-Ion, LTO
Number of Battery Strings (LiFePO4)8S-20S
Number of Battery Strings (Li-Ion)7S-20S
Number of Battery Strings (LTO)12S-20S
Continuous Discharge Current200A
Continuous Charging Current200A
Maximum Instantaneous Current (Charge/Discharge)350A
Active BalancerYes
Maximum Balance Current2A
Conductive Current in Main Circuit0.5mΩ
Overcurrent Protection (Adjustable)10-400A
Dimensions (L x W x H)162mm x 102mm x 20mm
Wiring OutputCommon Port
Ports/SocketsOn/OFF-LCD, TEMP, RS485 (GPS), HEAT
External CommunicationBluetooth (BT), PC
Built-in Inverter ProtocolsNo
CertificationCE, RoHS, FCC
Charger IncludedNo
Battery IncludedNo
Detailed technical specifications table for various JK Smart BMS models, including B2A20S20P
Figure 3: Comprehensive technical specifications for JK Smart BMS models.

4. Setup & Installation

Important: Installation of the JK Smart BMS requires appropriate knowledge and skills in battery management systems and electronics. Incorrect installation can lead to damage to the BMS, battery pack, or pose safety risks.

4.1. Initial Configuration

For the correct operation of the device, initial configuration via the mobile application (Android/iOS) or PC software is mandatory. At a minimum, you must specify the following parameters:

  • The total number of cells in your battery pack (e.g., 7S, 8S, up to 20S).
  • The specific type of battery chemistry (Li-Ion, LiFePO4, or LTO).

The BMS will not function correctly without this initial parameter matching process.

4.2. Wiring Connections

Connect the provided cable for individual cells to the BMS. Ensure each cell's balance wire is connected to the correct corresponding pin on the BMS connector. Refer to the labels on the BMS for accurate connection points (B+, B1, B2, ..., B24).

Close-up view of the BMS connectors, showing labels for B+, B1-B24, CAN/RS485, GPS, Display, and Heating
Figure 4: Close-up of BMS connectors and labels.

4.3. Circuit Breaker Installation

Install the supplied circuit breaker. This component allows you to manually turn the battery pack on and off and is essential for activating the BMS during its first startup.

The external circuit breaker button with its wiring harness
Figure 5: External circuit breaker button.

4.4. Communication Setup

  • Bluetooth: The Bluetooth module is built into the device. Enable Bluetooth on your mobile device and connect to the BMS via the dedicated application.
  • PC Communication: For PC monitoring and parameter setting, an additional USB-TTL cable is required. Connect this cable to the appropriate RS485 port on the BMS.

5. Operation

5.1. Monitoring Battery Parameters

Once configured, you can monitor the current parameters of your battery pack using the intuitive mobile application (Android/iOS) or PC software. This includes individual cell voltages, total pack voltage, charge/discharge current, temperature, and balancing status.

JK BMS unit with an overlay of a mobile application interface displaying battery parameters like voltage, current, and cell balance
Figure 6: Mobile application interface for monitoring BMS parameters.

5.2. Active Balancing

The built-in high-current active balancer (up to 2A) ensures quick alignment of cell voltages, even in high-capacity batteries. This process helps to maximize battery life and performance by preventing individual cells from becoming overcharged or over-discharged relative to others.

5.3. Charging and Discharging

The BMS supports continuous charging and discharging currents of up to 200A, with a maximum instantaneous current of 350A. The common power port allows for charging with the same intensity as the discharge current.

5.4. Heating Mat Control

This model (B2A20S20P) offers the function of controlling heating mats, which can be used to maintain optimal battery temperature in cold environments. Refer to the app/PC software for configuration and control of this feature.

6. Maintenance

The JK Smart BMS is designed for reliable operation with minimal maintenance. Key maintenance practices include:

  • Regular Monitoring: Periodically check battery parameters via the mobile app or PC software to ensure all cells are balanced and operating within safe limits.
  • Firmware Updates: Check for and apply any available firmware updates for the BMS to ensure optimal performance and access to new features.
  • Physical Inspection: Occasionally inspect all wiring connections for tightness and signs of wear or corrosion.

The BMS is designed to generate less heat at the same load compared to competitive systems, contributing to its longevity.

7. Troubleshooting

  • BMS Not Functioning After Installation: Ensure that the initial configuration steps have been completed in the mobile application or PC software. The BMS requires the correct cell count and battery type to be set before it can operate.
  • Cell Imbalance Issues: If significant cell voltage differences are observed, verify that the active balancing function is enabled and configured correctly in the application. Allow sufficient time for the balancer to equalize cells, especially in high-capacity packs.
  • Communication Problems (Bluetooth/PC):
    • For Bluetooth, ensure your mobile device's Bluetooth is enabled and within range. Restart the app and/or the BMS.
    • For PC communication, verify that the USB-TTL cable is correctly connected and that the necessary drivers are installed on your computer.
  • Overcurrent/Overvoltage/Undervoltage Protection Triggered: The BMS will trigger protection mechanisms if parameters exceed safe limits. Check your battery pack's health, load, and charging source. Review the protection settings in the application to ensure they are appropriate for your battery chemistry and usage.

8. User Tips

  • Parallel Battery Packs: The ability to charge with the same intensity as the discharge current allows battery packs equipped with this BMS to be connected in parallel without the need for additional parallel modules. However, always ensure protection with an appropriate overcurrent fuse when connecting packs in parallel.
  • Customization: Take advantage of the BMS's full customizability. Fine-tune parameters in the mobile app or PC software to perfectly match your specific battery pack and application requirements.
  • Optional LCD Monitor: Consider using an optional LCD monitor (if compatible) to display real-time battery parameters directly, offering an alternative to the mobile app for quick checks.

9. Warranty & Support

This product is covered by a 2-year European warranty and technical support provided by OnVolt. As an authorized representative of JK BMS, OnVolt guarantees the authenticity of the product and provides expert assistance.

Authorization certificate from Chengdu Jikong Technology Co., Ltd. to ONVOLT URBANSKI sp. k. for selling JK and JIKONG products in the EU market
Figure 7: Authorization Certificate for OnVolt as a seller of JK BMS products.

For technical support or warranty claims, please contact OnVolt Store directly.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.