Manuals+

M-VAVE SP100

M-VAVE SP100 Mini Guitar Amplifier User Manual

Model: SP100

Brand: M-VAVE

1. Introduction

The M-VAVE SP100 is a portable electric guitar and bass integrated digital speaker designed for musicians who need a versatile and compact amplifier for practice, recording, and performance. Featuring APP control, long battery life, and OTG recording capabilities, the SP100 offers a wide range of tones and effects in a user-friendly package.

2. Package Contents

Please check the box for the following items:

  • M-VAVE SP100 Speaker x1
  • User Manual x1
  • USB-C Cable x1
  • 3.5mm AUX Cable x1
  • Non-Slip Rubber Pads x4
M-VAVE SP100 package contents: User Manual, USB Cable, 3.5mm Audio Cable, and SP100 Speaker.
Figure 2.1: M-VAVE SP100 Package Contents

3. Product Overview

The M-VAVE SP100 is a compact and lightweight amplifier with intuitive controls and advanced features. It includes a custom full-range speaker with a bass reflex port design for optimal sound quality.

3.1. Controls and Ports

Top-down view of M-VAVE SP100 controls: Input, Full-Rig, Gain, Tone, Mod, Space, Master knobs, Power button, and BT button.
Figure 3.1: Top View of SP100 Controls
Rear view of M-VAVE SP100 showing USB and AUX ports, and regulatory marks.
Figure 3.2: Rear View of SP100 Ports
  • Input: 1/4" mono jack for connecting your instrument.
  • Full-Rig: Knob to adjust the overall rig volume or gain.
  • Gain: Knob to control the input gain.
  • Tone: Knob to adjust the tonal characteristics.
  • Mod: Knob to control modulation effects.
  • Space: Knob to control spatial effects (e.g., reverb, delay).
  • Master: Knob to adjust the overall output volume.
  • Power Button: Press and hold to turn the unit on/off.
  • BT Button: Press to activate Bluetooth pairing mode.
  • USB Port: For charging, computer recording, and firmware updates.
  • AUX Port: 1/8" stereo jack for connecting external audio sources.

4. Setup

4.1. Charging the Battery

The SP100 features a built-in 7.4V/2600mAh rechargeable battery, providing up to 8 hours of continuous operation on a full charge. To charge the unit:

  1. Connect the supplied USB-C cable to the USB port on the SP100.
  2. Connect the other end of the USB-C cable to a 5.0V 2.0A charger (not included).
  3. Charging from depleted to full takes approximately 3.5 to 4 hours.
Diagram illustrating the M-VAVE SP100's long-lasting battery life and charging details.
Figure 4.1: Battery Life and Charging Information

4.2. Initial Connection

  1. Ensure the SP100 is fully charged or connected to a power source.
  2. Press and hold the Power button to turn on the amplifier.
  3. Connect your electric guitar or bass to the 1/4" INPUT jack.
  4. Adjust the GAIN, TONE, MOD, SPACE, and MASTER knobs to your desired settings.

5. Operating Instructions

5.1. Basic Playback

Once your instrument is connected and the amplifier is powered on, you can begin playing. Adjust the various knobs (GAIN, TONE, MOD, SPACE, MASTER) to shape your sound. The FULL-RIG knob controls the overall output of the selected rig.

5.2. Bluetooth Connection

The SP100 supports wireless Bluetooth connection for playing along with backing tracks or external audio.

  1. Press the BT button on the SP100 to activate Bluetooth pairing mode. The BT indicator light will blink.
  2. On your mobile device (smartphone, tablet, etc.), go to Bluetooth settings and search for "M-VAVE SP100".
  3. Select "M-VAVE SP100" to pair. The BT indicator light will turn solid blue once connected.
  4. You can now play audio from your device through the SP100.
M-VAVE SP100 connected to a smartphone via OTG for recording.
Figure 5.1: Mobile APP and Bluetooth Connection

5.3. Mobile APP Control

The SP100 can be controlled via a mobile application, allowing you to import massive AMP and IR files, and access 9 sets of presets and 6 modulation effects.

  1. Ensure your SP100 is connected via Bluetooth to your mobile device.
  2. Download and install the official M-VAVE application from your device's app store.
  3. Open the app and follow the on-screen instructions to connect to your SP100.
  4. Within the app, you can customize tones, effects, and manage presets.
Video 5.1: M-VAVE SP100 Product Demonstration (Highlights features like fine tuning, portability, simple control, 9 presets, long battery life, cavity structure, simple operation, USB computer recording, OTG internal recording, pedal control, wireless BT connection, and mobile APP connection.)

5.4. USB Computer Recording

The SP100 can function as a computer speaker and an external sound card, allowing for direct recording of your instrument.

  1. Connect the SP100 to your computer using the supplied USB-C cable.
  2. Your computer should recognize the SP100 as an audio input/output device.
  3. Open your preferred Digital Audio Workstation (DAW) or recording software.
  4. Select the SP100 as your audio input device to record your instrument directly.
M-VAVE SP100 connected to a laptop for USB computer recording.
Figure 5.2: USB Computer Recording Setup

5.5. OTG Internal Recording

For outdoor or mobile recording, the SP100 supports OTG internal recording with a separate OTG adapter (not included).

  1. Connect your instrument to the SP100's INPUT jack.
  2. Connect your mobile device to the SP100's USB port using an OTG adapter and the USB-C cable.
  3. Connect headphones to your mobile device or the SP100's output (if available and compatible).
  4. Use a recording app on your mobile device to capture your performance.

5.6. External Pedal Support

The SP100 is compatible with external pedals (e.g., Chocolate/Plus pedals) for wired or wireless control, allowing for easy toggle switching of effects and presets.

Refer to your external pedal's manual for specific connection and operation instructions.

6. Maintenance

To ensure the longevity and optimal performance of your M-VAVE SP100, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the exterior of the amplifier. Do not use abrasive cleaners, solvents, or waxes.
  • Storage: Store the amplifier in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
  • Battery Care:
    • Avoid fully discharging the battery frequently.
    • Charge the battery regularly, even if not in use, to maintain its health.
    • If storing for an extended period, charge the battery to about 50% and recharge every few months.
  • Handling: Handle the amplifier with care. Avoid dropping it or subjecting it to strong impacts.
  • Ventilation: Ensure the amplifier has adequate ventilation during use to prevent overheating.

7. Troubleshooting

If you encounter issues with your M-VAVE SP100, please refer to the following troubleshooting tips:

ProblemPossible CauseSolution
No sound from speaker
  • Amplifier not powered on.
  • Volume knobs (GAIN, MASTER) are too low.
  • Instrument cable faulty or not properly connected.
  • Instrument volume is off.
  • Press and hold the Power button to turn on.
  • Increase GAIN and MASTER volume.
  • Check and replace instrument cable if necessary. Ensure secure connection.
  • Turn up your instrument's volume.
Poor sound quality / Distortion
  • GAIN knob set too high.
  • Faulty instrument or cable.
  • Low battery.
  • Reduce the GAIN knob.
  • Test with a different instrument or cable.
  • Charge the amplifier fully.
Bluetooth not connecting
  • SP100 not in pairing mode.
  • Device Bluetooth is off or too far.
  • Interference from other devices.
  • Press the BT button to enter pairing mode (blinking light).
  • Ensure Bluetooth is enabled on your device and it's within range.
  • Move away from other wireless devices.
Unit not charging
  • USB-C cable faulty or not properly connected.
  • Charger not providing sufficient power (needs 5V 2A).
  • Check USB-C cable and connections. Try a different cable.
  • Use a charger that meets the 5V 2A specification.

8. Specifications

FeatureSpecification
InputStandard 1/4" mono interface (TS), 1/8" AUX stereo interface (TRS)
Output1/8" stereo output (TRS)
Sampling Rate44.1K 24bit
Dimensions (L x W x H)196.7mm x 133mm x 106mm
Weight1128g (approx. 1.13 kg)
Speaker SystemMono Full-Range Speaker | Impedance: 4Ω | Max Power: 10W
Max Sound Pressure Level (SPL)90+3 dB SPL@1m
Frequency Range110-20000HZ
Enclosure MaterialBass Reflex Port Design
Power AmplifierClass D Amplifier | 10W Output (f0=158Hz)
Headphone Output Impedance16-32Ω
Power Input5V, 2A
Rated Power of Speaker10W
Maximum Loudness90dB+3dB
Battery Model Specification18650-2S
Battery Capacity2600 mAh
Battery Nominal Voltage7.4V
Battery LifeAbout 8 Hours
Operating Current≥110mA
MaterialPVC
Batteries IncludedYes

9. User Tips

  • Outdoor Recording: When using the OTG recording function outdoors, remember to bring a separate OTG adapter and headphones for monitoring your sound.
  • Sound Customization: Experiment with the GAIN, TONE, MOD, and SPACE knobs to discover a wide range of sounds. Don't forget to explore the mobile app for additional AMP and IR files.
  • Practice Aid: Utilize the Bluetooth connection to stream backing tracks from your phone and practice along, making your sessions more engaging.
  • Power Management: To maximize battery life, turn off the amplifier when not in use.

10. Warranty and Support

For warranty information and customer support, please refer to the official M-VAVE website or contact your retailer. Keep your proof of purchase for any warranty claims.

If you need any help or have questions, please leave a message to the seller or manufacturer. They will try their best to help you and provide you with the best solution.