Introduction
The CADDXFPV Infra V2 Camera is an advanced FPV camera designed for drones, offering exceptional low-light performance and high-resolution imaging. Featuring a 1500TVL black and white sensor, 2.8mm lens, and AI image enhancement, it provides clear visuals even in 0 Lux conditions. This manual provides instructions for setting up, operating, and maintaining your Infra V2 Camera.
Key Features
- New V2 AI Image Enhancement algorithm for improved clarity in low light.
- High Resolution 1500TVL black and white sensor.
- No-Light night vision capability (0 Lux).
- Compact and lightweight design with a durable metal case.
- Native 4:3 aspect ratio for full, uncropped images.
- Super WDR (Wide Dynamic Range) for detailed shooting in varied lighting.
- 131.6° ultra-wide-angle lens for an expansive field of view.
- Switchable NTSC/PAL video output.
- 9V-24V wide voltage input.
Illustration of Infra V2 Camera highlighting AI Image Enhancement, Black and White Sensor, Zero Lux, and High Resolution.
Package Contents
| Item | Quantity |
|---|---|
| CADDX Infra V2 Camera + AI Box | 1 |
| 3PIN Power Cable | 1 |
| Quick Guide | 1 |
| M2*5*0.5mm Gasket | 4 |
| M2*4 Screws | 4 |
| M2*5 Screws | 4 |
| M2*6 Screws | 4 |
Setup Instructions
Follow these steps to connect your CADDXFPV Infra V2 Camera to your FPV drone system.
Wiring Connection:
- POWER (9-24V): Connect the power wire to the Flight Controller (FC) solder pad that provides 9-24V.
- GND: Connect the ground wire to the common ground (GND) of your system.
- CVBS: Connect the CVBS video output wire to the FC CAM interface for video signal transmission.
Detailed connection diagram for the Infra V2 Camera, showing power, ground, and video signal connections.
Close-up view of the AI Box indicating CVBS, GND, and POWER connection points.
Mounting:
The camera and AI box are designed to be compact. Use the provided M2 screws and gaskets for secure mounting on your drone frame. Ensure the lens is clear and unobstructed.
Dimensions of the AI Box (34x34x13.2mm) and Camera (20.5x20.5x26.9mm) for mounting reference.
Operating Instructions
The CADDXFPV Infra V2 Camera is designed for straightforward operation once connected.
Video Output Settings:
- The camera supports both NTSC and PAL video output formats. This can typically be switched via an OSD (On-Screen Display) menu if your flight controller supports camera control, or it may auto-detect based on your VTx/monitor.
- The image sensor outputs in a native 4:3 aspect ratio. Ensure your FPV goggles or monitor are set to display 4:3 for the best, uncropped view.
Low-Light and WDR Performance:
The Infra V2 camera excels in challenging lighting conditions:
- 0 Lux Night Vision: The camera is capable of capturing clear black and white images even in complete darkness (0 Lux) thanks to its specialized sensor and AI enhancement.
- Super WDR: The Wide Dynamic Range feature ensures that details are preserved in both very bright and very dark areas of the image simultaneously, providing a balanced and clear picture in environments with high contrast.
Visual comparison demonstrating the superior night vision capabilities of the Infra Camera over a standard analog camera.
Illustration of Wide Dynamic Range (WDR) effectiveness compared to a camera without WDR in high-contrast scenes.
Specifications
| Feature | Detail |
|---|---|
| Model | CADDX Infra V2 Camera |
| Image Sensor | Black&White Sensor |
| Horizontal Resolution | 1500TVL |
| FOV (Field of View) | 131.6° |
| Aspect Ratio | 4:3 |
| Min. Illumination | 0 Lux |
| WDR | Super WDR |
| Lens | M16/F1.0/2.8mm |
| Frame Rate | 50fps |
| Power Consumption | <1.2W |
| Supply Voltage | 9V~24V |
| Output Format | PAL (NTSC switchable) |
| Analog Interface | CVBS |
| Latency | Average Latency 20ms |
| Image Quality | AI Image Enhancement |
| AI Box Dimensions | 34x34x13.2mm |
| Camera Dimensions | 20.5x20.5x26.9mm |
Comprehensive specifications for the CADDXFPV Infra V2 Camera.
Maintenance
- Lens Care: Keep the camera lens clean. Use a soft, lint-free cloth and lens cleaning solution if necessary. Avoid touching the lens with bare fingers.
- Environmental Protection: While the camera has a metal case for durability, avoid exposing it to extreme moisture, dust, or direct impacts.
- Cable Integrity: Regularly inspect the power and video cables for any signs of wear, cuts, or damage. Replace damaged cables immediately to prevent electrical issues.
- Firmware Updates: Check the official CADDXFPV website periodically for any available firmware updates that might improve performance or add new features.
Troubleshooting
- No Video Output:
- Check all wiring connections (POWER, GND, CVBS) to ensure they are secure and correctly polarized.
- Verify the power supply voltage is within the 9V-24V range.
- Confirm your VTx and FPV goggles/monitor are set to the correct video format (NTSC/PAL) matching the camera's output.
- Poor Image Quality / Blurry Image:
- Clean the camera lens.
- Ensure the lens is securely tightened and focused (if adjustable).
- Check for any interference from other electronic components on your drone.
- Verify the power supply is stable and free from noise.
- Camera Not Powering On:
- Double-check power connections and voltage.
- Inspect the power cable for damage.
User Tips
- Optimal Night Flying: Leverage the 0 Lux night vision and AI image enhancement for unparalleled clarity during nighttime FPV flights. The black and white sensor provides superior contrast and detail in extremely low light compared to color cameras.
- Maximize Field of View: The 131.6° ultra-wide-angle lens provides an expansive view. Ensure your FPV setup is configured to display the native 4:3 aspect ratio to fully utilize this wide field of view without cropping.
- Durable Design: The metal casing not only aids in heat dissipation but also provides enhanced durability. This makes the Infra V2 a robust choice for aggressive FPV flying.
- Compact Integration: The reduced size and dimensions of the AI box and camera make integration into smaller or tighter drone builds easier. Plan your wiring and mounting carefully to take advantage of its compact form factor.
Disclaimer
⚠️ For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.
