1. Introduction
This manual provides instructions for the installation, operation, and maintenance of your new Malcayang LED Rear Number Plate Lights. These lights are designed to provide bright, efficient illumination for your vehicle's license plate, enhancing visibility and safety. Please read this manual thoroughly before installation and use.
2. Safety & Warnings
Important Safety Information
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
3. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Malcayang |
| Item Type | License Plate Lights |
| Voltage | 12 V |
| Lumens | 2400LM |
| Item Weight | 0.1kg |
| Includes | One pair (right and left) |
| Origin | Mainland China |
| CANBUS Compatibility | Error Free (Anti-EMC, No Radio Interference, No Error on dashboard) |
| Waterproof Rating | 100% Waterproof |
| Dimensions (approx.) | Length: 73mm, Width: 24mm, Thickness: 10mm |
Compatible Vehicle Models
- For VW Golf Plus MK5 (2003-2009)
- For VW Jetta MK3/MK5 (2005-2010)
- For VW Caddy Ⅲ (2004-2010)
- For VW Passat Cimousint (2001-2005)
- For VW Passat 3BG/B5.5 (1999-2005)
- For VW Passat Combi/Variant (2006-2008)
- For VW Touran (2003-2010)
- For VW Transporter T5 (2003-2015)
- For VW Transporter T6 (2015-2020)
- For VW Syncro MK5 1K (A5) (2005-2010)
- For Skoda Superb MK1 (2001-2008)
- For Skoda SuperⅠ (2002-2008)
- For Skoda Octavia MK1 sedan (type 1U only fits the limousine) (2000-2008)
OEM Part Numbers (for reference)
- 3B5943021E
- 3B5943021
- 3B5998026
- 3B5998026A
- 7E0943021A

4. Installation
The Malcayang LED Rear Number Plate Lights are designed for easy, direct replacement (plug and play) of your vehicle's original license plate lights.
Installation Steps:
- Ensure your vehicle's ignition is off and the parking brake is engaged.
- Locate the original rear number plate lights on your vehicle.
- Carefully remove the original car parts to access the internal screws or clips holding the existing license plate light assembly. This may involve using a trim removal tool to avoid scratching paint.
- Loosen the screws or clips to further remove the cover or cap of the original light.
- Disconnect the wiring harness from the original light assembly.
- Connect the wiring harness to the new Malcayang LED Rear Number Plate Light.
- Insert the new LED light assembly into the housing, ensuring a secure fit.
- Fasten any screws or clips removed in step 3 to secure the new light assembly.
- Repeat the process for the other side if replacing both lights.
- Test the new lights by turning on your vehicle's lights to ensure proper function before fully reassembling any removed trim or covers.


5. Operation
Once properly installed, the Malcayang LED Rear Number Plate Lights will operate automatically with your vehicle's lighting system. They will illuminate when your vehicle's parking lights or headlights are turned on, providing clear and bright illumination for your license plate.
6. Maintenance
The Malcayang LED Rear Number Plate Lights are designed for long-lasting performance with minimal maintenance.
- Cleaning: Periodically clean the surface of the lights with a soft, damp cloth to remove dirt and debris. Avoid using abrasive cleaners or solvents.
- Inspection: Regularly inspect the lights for any signs of damage, cracks, or loose connections.
- Waterproof: The lights are 100% waterproof, ensuring durability in various weather conditions.

7. Troubleshooting
Common Issues and Solutions:
- Lights do not illuminate:
- Check all electrical connections to ensure they are secure and properly seated.
- Verify that the vehicle's lights are turned on.
- Inspect the vehicle's fuse box for any blown fuses related to the license plate lights.
- Ensure the lights are correctly installed in the housing.
- Dashboard error message:
- These LED lights are designed to be CANBUS error-free, preventing dashboard warnings. If an error occurs, double-check the installation and connections. If the issue persists, consult a professional auto electrician.
- Flickering lights:
- Ensure stable power supply and secure connections. Flickering can sometimes indicate an unstable electrical connection.

8. User Tips
- Always disconnect the vehicle's battery before performing any electrical work to prevent short circuits or injury.
- When removing original components, use appropriate tools to avoid damaging vehicle trim or paintwork.
- After installation, perform a quick function check of all vehicle lights to ensure everything is working correctly.
- Keep the original packaging and this manual for future reference.
9. Warranty & Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller, Malcayang Professional Autoparts Store, directly through your purchase platform.
A detailed user manual in PDF format is available for further information:
Manufacturer & EU Authorized Representative Information:
Manufacturer:
Company Name: Guangzhou yangchi auto parts co.LTD
Address: CN-2 # 1003 min jie ke chuang, minying ke ji yuan, tai he zhen, baiyun district, Guangzhou
E-Mail: ouyan99@dingtalk.com
Telephone: 86-18102513142
EU Authorized Representative:
Company Name: CET PRODUCT SERVICE LTD
Address: Osterholzallee 144, 71636 Ludwigsburg Germany
E-Mail: info.cetservice@gmail.com
Telephone: +4971416432236
eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main, Germany
contact@evatmaster.com