DASQUA 7212-0025

Contents

Dasqua 5-30N.m 3/8" Drive Adjustable Torque Wrench User Manual

Model: 7212-0025

1. Introduction

This manual provides essential information for the safe and effective use of your Dasqua 5-30N.m 3/8" Drive Adjustable Torque Wrench. This precision instrument is designed for accurately tightening screws, bolts, and nuts to a specified torque value, crucial for engineering machinery and car repair applications. Please read this manual thoroughly before operation and retain it for future reference.

2. Product Overview

The Dasqua Adjustable Torque Wrench is a robust and accurate tool. It features a durable chrome-plated body, a clear scale for setting torque, and a 3/8-inch square drive for various sockets.

Full view of the Dasqua 5-30N.m 3/8 inch drive adjustable torque wrench
Figure 1: Full view of the torque wrench.
Close-up of the torque wrench head with ratchet mechanism
Figure 2: Close-up of the wrench head, showing the ratchet mechanism and direction switch.
Close-up of the 3/8 inch square drive on the torque wrench
Figure 3: Detail of the 3/8" square drive for attaching sockets.
Dasqua torque wrench stored in its protective case
Figure 4: The torque wrench neatly stored in its protective case.

3. Specifications

FeatureDescription
Product NameDasqua Torque Wrench
Model Number7212-0025
Torque Range5-30 N.m
Graduation0.25 N.m
Accuracy±3%
Square Drive3/8"
Length250 mm
OriginMainland China (Sichuan)
Warranty2 Years

4. Safety Instructions

To ensure safe operation and prevent damage to the tool or workpiece, please adhere to the following safety guidelines:

  • Do not use as a pry bar: This torque wrench is not designed for prying or as a standard ratchet wrench for breaking loose stubborn fasteners.
  • Do not exceed maximum torque: Never apply force beyond the specified maximum torque value (30 N.m) of this wrench. Over-torquing can damage the wrench and the fastener.
  • Operate within load range: The wrench must only be used within the specified load range of its handle.
  • Adjust torque accurately: Always ensure the torque value is correctly set to the required specification for the task. Incorrect settings can lead to under- or over-tightening.
  • Avoid disassembly: Do not attempt to disassemble or reassemble the wrench casually. This is a precision instrument and improper handling can affect its calibration and accuracy.
  • Protect from impact: Avoid dropping or subjecting the wrench to harsh impacts, which can affect its internal calibration.
  • Keep clean and dry: Store the wrench in a clean, dry environment to prevent corrosion and maintain functionality.

5. Setup

Before using the torque wrench, ensure it is clean and in good working condition. Follow these steps to set the desired torque:

  1. Unlock the handle: Locate the locking mechanism (usually a knob or collar at the base of the handle) and unlock it by turning or pulling it.
  2. Set the main torque value: Rotate the handle to align the desired main torque value with the main scale line on the wrench body.
  3. Set the fine adjustment: Use the fine adjustment scale on the handle to dial in the precise torque value. For example, if you need 25.5 N.m, set the main scale to 25 N.m and then rotate the handle until the 0.5 N.m mark on the fine adjustment scale aligns with the main scale line.
  4. Lock the handle: Once the desired torque is set, lock the handle securely to prevent accidental changes during operation.
  5. Attach the socket: Select the appropriate 3/8" drive socket for your fastener and firmly attach it to the square drive of the torque wrench.

6. Operating Instructions

Using the torque wrench correctly is crucial for achieving accurate fastening. Follow these steps:

  1. Prepare the fastener: Ensure the fastener and mating threads are clean and free of debris or rust. Apply lubricant if specified by the manufacturer.
  2. Position the wrench: Place the socket onto the fastener. Ensure the wrench is positioned so that you can apply force smoothly and steadily.
  3. Apply force: Hold the wrench by the handle and apply a slow, steady, and increasing force. Do not jerk or snap the wrench.
  4. Listen for the click: Continue applying force until you hear and feel a distinct "click" from the wrench. This indicates that the preset torque has been reached.
  5. Stop immediately: As soon as the click is heard/felt, stop applying force immediately. Do not continue to tighten the fastener further.
  6. Release and reset: Remove the wrench from the fastener. For storage, it is recommended to reset the torque wrench to its lowest setting (but not below the minimum range) to relieve spring tension and maintain calibration accuracy over time.

7. Maintenance

Proper maintenance will extend the life and accuracy of your torque wrench:

  • Cleaning: After each use, wipe the wrench clean with a soft, dry cloth. Do not use harsh chemicals or solvents that could damage the finish or internal components.
  • Storage: Store the torque wrench in its protective case (Figure 4) in a clean, dry, and temperature-controlled environment. Always reset the torque setting to the lowest value before storage to relieve tension on the internal spring.
  • Regular Calibration: Regular maintenance and calibration are necessary, at least once a year, to ensure the wrench maintains its specified accuracy. This should be performed by a qualified technician or calibration service.
  • Inspection: Periodically inspect the wrench for any signs of damage, wear, or corrosion. Do not use a damaged wrench.

8. Troubleshooting

If you encounter issues with your torque wrench, consider the following:

  • No audible click: Ensure the torque setting is above the minimum range. Verify that you are applying slow, steady force. If the issue persists, the wrench may require recalibration or service.
  • Inaccurate readings: This is often due to improper technique (jerking, over-tightening after click) or the wrench being out of calibration. Ensure proper technique and consider professional calibration.
  • Difficulty setting torque: Check if the locking mechanism is fully disengaged. Clean any debris from the adjustment mechanism. If it remains stiff, do not force it; seek professional service.
  • Wrench feels loose or damaged: Discontinue use immediately. A damaged torque wrench can provide inaccurate readings and lead to unsafe conditions. Contact support for repair or replacement.

9. User Tips

  • Practice makes perfect: If you are new to using a torque wrench, practice on non-critical fasteners to get a feel for the "click" and proper application of force.
  • Use extensions wisely: While extensions can be used, be aware that they can sometimes affect the accuracy of the torque reading. For critical applications, try to use the shortest extension possible or none at all.
  • Avoid dropping: Torque wrenches are precision instruments. Even a small drop can affect their calibration. Always handle with care.
  • Read vehicle/equipment manuals: Always refer to the specific torque specifications provided in your vehicle's or equipment's service manual.

10. Warranty and Support

Your Dasqua 5-30N.m 3/8" Drive Adjustable Torque Wrench comes with a Two-Year Warranty from the date of purchase, covering defects in materials and workmanship under normal use. This warranty does not cover damage resulting from misuse, abuse, alteration, or unauthorized repair.

For warranty claims, technical assistance, or service inquiries, please contact your authorized Dasqua dealer or the point of purchase. Please have your model number (7212-0025) and proof of purchase available when contacting support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.